Morganton, NC
Scoured the forums and can’t find this particular issue that I’m having with my TMNT premium.
The glider servo burned up a couple weeks ago, and I bought a new one and soldered it up yesterday. The glider works perfectly in test mode, goes to every position, seems to be right. Then I back out of diagnostics and shut the coin door… and it goes haywire. Way past the ramp wall on the left, and the servo motor is still stuck on trying to push it farther. I’ve power cycled and done this about 6 times with the same result. My guess is the issue is what burned up the original servo in the first place.
Has anyone seen this issue or have an idea what to check?
Video:
https://vimeo.com/814792605
(Topic ID: 334564)
