My turbo kick was broke when i got machine ripped out that garbage used stern one with old coil no problems.

You have the right coil in there. Sounds like you need to check over the ppb board pins 1,2,3 and 5 at connector j7 should read 50+ dc volts each. Pin 6 28+volts. The ppb board has fuses on it check them all make sure none of the fuse clips are dirty or cracked and making poor connection this is known DE issue.
Make sure all board headers are soldered right almost always find the pins solder joint is cracked on backside of board. Check the bridge rectifier br1 on the board also may have poor joint there If the ppb board checks out fine check the wiring and connector for poor connection you may need to do some header connectors. Also if power supply is not new check it over these are know to be problems things love to flame out.

My turtles power supply looked like it had lived on a NASA launch pad for 25 years burnt up pile of crap so i got a used one and gutted it out all new parts on board.
Have 3 Data-east machines myself and had to gut each power supply and two of them gutted out ppb board also many header connections. Just because it looks good doesn't mean it is. Get out the meter and check it.