The Rolling Stones
Stern, 2011http://www.TiltGraphicsInc.com
We sell, GameBlades, Pinball Toppers, Pinball Shooter Rods, Chroma Pinball Nuts, PinGulps, Pinball Shooter Plates, Pinball Flipper Toppers and Pinhedz cleaning products and other Pinball Mods, .
Screen Shot 2019-11-09 at 11.55.45 AM (resized).png
Elvira House of Horrors Speaker Accents
https://www.tiltgraphicsinc.com/elvira-house-of-horrors
Elvira-Speaker-Accents-01 (resized).jpgElvira-Speaker-Accents-02 (resized).jpgElvira-Speaker-Accents-03 (resized).jpgElvira House of Horrors Speaker Grill Accent
https://www.tiltgraphicsinc.com/elvira-house-of-horrors
Elvira-Speaker-Grill-Accent-02 (resized).jpgQuoted from -ZZZ-:If you have GameBlades installed for either of the following games, can you please post pictures?
* Indiana Jones (Williams)
* Lord of the Rings
Much appreciated!!!!</blockquote
Willy Wonka also please
Quoted from jGraffix:Elvira House of Horrors Speaker Grill Accent
https://www.tiltgraphicsinc.com/elvira-house-of-horrors[quoted image]
These would be cool on The Munsters too. Any chance it will happen?
Quoted from gac:These would be cool on The Munsters too. Any chance it will happen?
The measurements should be the same but I don't believe blood drips work on the Munsters. We're currently working on something different for that pin.
Elvis: Red GameBlades Installed
https://www.tiltgraphicsinc.com/elvis
Elvis-Red-GameBlades-01 (resized).jpgElvis-Red-GameBlades-02 (resized).jpgElvira's Blood Drip Shooter Plate
https://www.tiltgraphicsinc.com/elvira-house-of-horrors
Elvira-Blood-Drip-Shooter-Plate-01 (resized).jpgElvira-Blood-Drip-Shooter-Plate-02 (resized).jpgElvira-Blood-Drip-Shooter-Plate-03 (resized).jpgGhostbusters Shooter Plate
https://www.tiltgraphicsinc.com/ghostbusters
GhostBusters-Slime-Shooter-Plates-01 (resized).jpgGhostBusters-Slime-Shooter-Plates-02 (resized).jpgGhostBusters-Slime-Shooter-Plates-03 (resized).jpg
Dr. Dude Shooter Rod
https://www.tiltgraphicsinc.com/dr-dude
Dr-Dude-Shooter-Rod-11 (resized).jpgQuoted from toasterman04:Ive got a cart if stuff ready to go... but need that promo code!
I was hoping for a promo code too.
Here at Modfather Pinball Mods , we carry a full line of Tilt Graphics products. I will be offering a 10 percent discount for a week for Black Friday. That discount applies to all Mods including Tilt Graphics Gameblades, Modfather Mods, Laseriffic Toppers, Plastic Protectors , Shooters, Custom PinCups, or any Custom paint Jobs of pinball parts or toys. I can absorb the discounts from my vendors , and spread some pinball love. I hope this OK to post here. Chuck
Use the code modfather2019 at https://modfatherpinball.com/
Tilt Graphics does have an "ON SALE" section in on our web site. We recently added over 20 items there and rotate items in and out throughout the year. In addition to this we place all our new designs in there for a week or two when they're first released.
The Walking Dead: Zombie Attack GameBlades™
https://www.tiltgraphicsinc.com/the-walking-dead
TWD-Zombie-Attack-GameBlades-2 (resized).jpgWilly Wonka BDG GameBlades
https://www.tiltgraphicsinc.com/willy-wonka
Willy-Wonka-BDG-GameBlades (resized).jpgBlack Knight Sword of Rage Flipper Decals
https://www.tiltgraphicsinc.com/black-knight-sword-of-rage
Black-Knight-Flipper-Decals (resized).jpg
BKSOR-Flipper-Decals-222-02 (resized).jpgWilly Wonka BDG GameBlades
https://www.tiltgraphicsinc.com/willy-wonka
The Walking Dead: Zombie Attack GameBlades™
https://www.tiltgraphicsinc.com/the-walking-dead
WW-and-TWD-GameBlades-3 (resized).jpgStar Wars Illumination GameBlades™
https://www.tiltgraphicsinc.com/star-wars
Star-Wars-Illumination-GameBlades-2 (resized).jpgTruck Stop GameBlades™
https://www.tiltgraphicsinc.com/truck-stop
TruckStop-GameBlades-2 (resized).jpgQuoted from Jesder:Apologies if it's been asked before. Is there any chance you will make game blades for Pinball 2000 machines Star Wars Episode 1 and Revenge from Mars?
We haven't but we could. PM your contact info and I'll be in touch.
Quoted from Jimmyhonda:How about some JP2 mods other than the yellow hazard lines? Flipper toppers or speaker grill, etc?
There are plenty of other Mod Makers that make a wide variety of different mods for the JP Stern pin. Yes we do have ideas for other mods but first we need to fulfill our core interests.
Black Knight Sword of Rage Custom Shooter Rod
https://www.tiltgraphicsinc.com/black-knight-sword-of-rage
Black-Knight-SOR-Shooter-Rod-1-222 (resized).jpgBlack-Knight-SOR-Shooter-Rod-2-222 (resized).jpgBlack-Knight-SOR-Shooter-Rod-3-222 (resized).jpgQuoted from jGraffix:Black Knight Sword of Rage Custom Shooter Rod
https://www.tiltgraphicsinc.com/black-knight-sword-of-rage[quoted image][quoted image][quoted image]
Very cool and very thrilled to see that you folks have not given up on BKSOR. I’ll probably end up getting one of these sooner rather than later.
I also bet that when the topper is released there will be some resurgence of interest in the game. I wouldn’t doubt that at least a few people who have been on the fence will finally cave and buy a game just to get the topper.
Hopefully there are still a few more BKSOR items to come from Tilt ... perhaps including some trim pieces for the coin door ala what you did for Jurassic Park but using the BKSOR rivet/stud motif. Ah, perchance to dream ... 
Black Knight Sword of Rage Coin Door Accents
https://www.tiltgraphicsinc.com/black-knight-sword-of-rage
BKSOR-Coin-Door-Accents (resized).jpgBlack Knight Sword of Rage Bundles
https://www.tiltgraphicsinc.com/black-knight-sword-of-rage
Black-Knight-SOR-Bundle-JT (resized).jpgBlack-Knight-SOR-Bundle-RH (resized).jpgQuoted from jGraffix:Black Knight Sword of Rage Custom Shooter Rod
https://www.tiltgraphicsinc.com/black-knight-sword-of-rage[quoted image][quoted image][quoted image]
Received my coin door accents and shooter rod yesterday.
The coin door accents look every bit as good as I thought they would. But I have to take a few moments to say how ultra-impressed I am by the shooter rod.
The skull sculpture knob faces forward and has a very nice heft to it. When I first held it, I thought it was made of metal, but jGraffix confirmed that it's actually a high-quality solid resin from a very high-end 3D printer. There is certainly no doubt that it is very solid.
The other interesting revelation from jGraffix pertained to the skull's eyes. I swore there were two "gems" inset in the skull. But guess what? What you see is actually a very stunning and incredibly professional paint job. The cliché that "it looks even better in person" is an understatement.
Kudos to the Tilt folks for producing such an excellent mod.
Please keep more BKSOR stuff coming!!!
Quoted from KingBW:Just some input on this AS shooter plate ... it looks good, but would look better if the feathers were a light gold color to match the cabinet art more closely for the premium models. The purple matches good for that area.[quoted image]
We can make the feathers in Gold and black for you.
I just wanted to share my appreciation for tilt graphics in this hobby. They produce the most, and BEST QUALITY art blades in this hobby. and most importantly they truly care about the hobby and their customers.
I had an issue with my last order, and they jumped through hoops and over exceeded my expectations on the level of service. Thank you very much for that. looking forward to my next order already!!
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/tilt-graphics-inc-mods/page/36?hl=therudyb and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Lynbrook, NY
Saskatoon, SK
Brisbane City