The Rolling Stones
Stern, 2011These are all Tilt Graphic designs. We will use this thread to post all our designs, answer questions and take requests. We put a lot of hard work into our designs we hope you enjoy them. See our entire catalog at http://www.TiltGraphicsInc.com
Looking great. Quick question....
The second design for Transformers....are the silver portions of each side chrome/mirrored? Or just the silver shown?
Thanks,
EV
Quoted from EchoVictor:Looking great. Quick question....
The second design for Transformers....are the silver portions of each side chrome/mirrored? Or just the silver shown?
Thanks,
EV
It comes printed with a brushed aluminum finish but it will be available as a mirror/decal combo.
Quoted from Chitownpinball:Do some games that havent been done to death already
We're open to suggestions.
So are these mirror blades with gfx on them or justgfx decals that are stickers for the side? Some look stickers and some look possibly half and half
Quoted from jrivelli:So are these mirror blades with gfx on them or justgfx decals that are stickers for the side? Some look stickers and some look possibly half and half
Most are decals but we do have several designs that incorporate Mirror Blades.
- The Walking Dead
- Tron
- Iron Man
- Transformers
Right, T2 indeed.
Also Jurassic Park, Stargate, Any system 3 gottliebs, etc.
I just see these same machines getting blades made for them over and over. Other machines need love too! 
I'm sure companies are looks for bang for their buck, as in what will I sell the most. But so many A list games get done over and over, I don't see ppl switching these things out for newer options. But on the flip side chasing b list games my not result in the turn of profit companies are looking for. But it would be nice for them to start thinking outside the box, how about some old s.s. bally stuff, Or dmds like bsd, ngg, id500
Quoted from jGraffix:Most are decals but we do have several designs that incorporate Mirror Blades.
- The Walking Dead
- Tron
- Iron Man
- Transformers
Just helped my brother install a pair of these on his Tron LE this weekend. Totally killer.....
Later,
EV
Quoted from tdiddy:I'm sure companies are looks for bang for their buck, as in what will I sell the most. But so many A list games get done over and over, I don't see ppl switching these things out for newer options. But on the flip side chasing b list games my not result in the turn of profit companies are looking for. But it would be nice for them to start thinking outside the box, how about some old s.s. bally stuff, Or dmds like bsd, ngg, id500
Don't be afraid to go look at our website. We have designs for Bram Strokers Dracula, No Good Gofers', Scared Stiff, Gilligan's Island, The Flintstones, Johnny Mnemonic and many others. I even created a custom one for Monte Carlo. Gave the first one away for free and I think we sold one other.
My design was inspired by the original art on the game and Pinball PT's design.
If you are a fan of these side decals please visit http://www.pinballpt.com.
They too have a collection of side decals.
CSI and Champion Please!
Quoted from transprtr4u:Do these not get damaged lifting the playfield up and/or down ?
Like any blades they can get damaged, if you do not take precautions.
1. Felt on sides of playfield
2. Slip some poster board in between playfield before lifting up/down
3. Just being super careful
4 Have you can level so it does not torque the playfield.
5 etc,,,,,
Quoted from Patofnaud:Like any blades they can get damaged, if you do not take precautions.
1. Felt on sides of playfield
2. Slip some poster board in between playfield before lifting up/down
3. Just being super careful
4 Have you can level so it does not torque the playfield.
5 etc,,,,,
I have GameBlades on all my Pins and I don't use FELT STRIPS. I used them once and they ended up adhering to the decal and damaging one side. Best advise is just be careful when lifting and lowering the play field and if you want use poster board as a buffer. Otherwise these things are very durable.
Quoted from Patofnaud:Like any blades they can get damaged, if you do not take precautions.
1. Felt on sides of playfield
what type of felt? thanks!!
Quoted from jGraffix:I have GameBlades on all my Pins and I don't use FELT STRIPS. I used them once and they ended up adhering to the decal and damaging one side. Best advise is just be careful when lifting and lowering the play field and if you want use poster board as a buffer. Otherwise these things are very durable.
How did it end up adhering to the blades?
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/tilt-graphics-inc-mods and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Lynbrook, NY
Christchurch
Fredericton, NB