UPDATED!! Would like to move this stuff out... Take everything for $99 including shipping.
More parts added 10/21.
An ASCI chip, (not sure if it works or not and do not have a game to test it in) JP ramp gate with light sockets, a TFTC key fob, some playfield metal posts, ASCI chip puller, bunch of plastic wired holders, 2 sets of letg bolts, (1 new, 1 used), a few pop bumper coil plates, flipper coil stop plates, . Some cabinet parts, metal corner plates, 2 cabinet door switches, a back glass lock plate, leg levelers, back box latch, and a couple back box bolts... please see the pics for all the additional parts.
Added 24 WPC backbox light board sockets, used.. and 6 coils, (2 flipper, a rollunder and FH eyeballl coil).Stopped restoring pinball games after 20 years and am still finding stuff laying around. Selling this stuff in a couple small lots, unless you want it all.
The WPC cpu board has some missing chips and not sure if replaced it would work or not. Shooter rods are new but the floating eyeball does have a couple marks near the end of it, the rollover reed switch and plate are used but work. These are very hard to find, discontinued. I apparently needed a connector and cut that one off. Used in CV, RFM, NBA, etc... The 4 led board is a book case opto switch for TAF. Four or five new misc. drop targets and some used pop bumper parts.
+ shipping.
pair of Data East side rails in very good shape, 4 oak wood sliders that are on the back of most pinball cabinets. Twenty four misc coin mechs. Twenty four WPC back box light board sockets. Two pieces of top playfield channel for some older Williams or Gottlieb games. A good MM Catapult wire form. Does need to be refinished or powder coated.