Any more broken left ramps?
You're currently viewing posts by Pinsider multiballmaniac1.
Click here to go back to viewing the entire thread.
Quoted from mbl1116:There's already a Facebook post showing shooter lane wear after a dozen or so plays. Anyone else seeing this?
That’s normal
Quoted from NickBuffaloPinball:Chipping spotted on my routed game that's been on location less than 2 weeks.
[quoted image]
My friends game already chipped in same spot after 133 plays.
Quoted from NickBuffaloPinball:Chipping spotted on my routed game that's been on location less than 2 weeks.
[quoted image]
The big question is will Stern ever stop over tightening these ball guides?
Quoted from Lermods:Been happening since at least Deadpool. Doesn't seem they care if they haven't fixed it by now. Maybe a bit harsh, but there is no excuse for this.
This is the main reason I haven’t bought a nib game in a year so far.
Quoted from Deadpool66:As far as the chipping caused by the guide lane is it worth contacting Stern?
Yes it will get worse.
Quoted from Groo:Forgot that I did have pics. You can see I raised the rail by the chip. [quoted image][quoted image]
Not good already. Is your ramp diverter broken yet?
Quoted from Lermods:Glad it was helpful. I have no idea how stern is letting games go out the door like this, but after the ant man scoop, it’s really disappointing. The clear coat is good, no pooling, but any time you drive a metal wedge into a clear coat finish it’s going to cause issues. the fix is so simple.
This is ridiculous. Why would they keep doing this. I have a new JP2 playfield coming. Ball guides are driven like someone hammered them in.
Quoted from chuckwurt:Hop into the GNR owners thread if you think the issues here are a lot.
The same problems from Stern every release. I wish it wasn’t this bad. Trust me
Quoted from TheCoinSlotTC:Having an issue with our Razor Crest switch, shot isn't regestering. Updated to .96, and the light on the board does activate when swung up, but nothing registers when in switch test. Checked all connections, see nothing loose. Anyone else have this issue or a suggested remedy? I'll be calling Stern later for support when by the game.
You can’t call them. Email only nowadays. The good ole top notch Chaz Saddiqi support days are long gone.
Quoted from tdiddy:The Foundry is now available
https://pinside.com/pinball/forum/topic/new-mandalorian-foundrymod[quoted image][quoted image][quoted image]
Very nice job.
Quoted from beltking:My LE came today and the plastic on the ramp was cracked before playing. Once I played two games the vibrations broke it off more. I had my distributor setup a ticket but any word what Stern is doing about these?
That was quick. Sorry to hear.
Quoted from P1nhead:So here are three lockdown bars. Star Wars Pro in the back, Mando LE in the middle, and Rick and Morty up front.
Is there a reason why the powder coating is not on the entirety of the piece on Mando as opposed to Star Wars or R&M (and all my other machines)?
Also, you can clearly see how vastly different the finishing pass for the miter is from the Star Wars Pro to Mando. All my other Stern machines have perfect fitment, this one seems really off.
Anyone have any thoughts? I don't think this is normal (yes others have the same extent of powder coat on their LE lockdown bars but not oxidation) and am wondering how best to approach this. The miters on the cabinet are not finished the same as any other stern I own, it is comparable to using a bit setup for 1/2" material instead of 3/4".
[quoted image][quoted image][quoted image][quoted image]
That stinks. Not how my AC/DC premium was or Star Trek Premium. Jeesh.
You're currently viewing posts by Pinsider multiballmaniac1.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/this-is-the-way-the-mandalorian-owners-club?tu=multiballmaniac1 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.