Quoted from douglasHicks:Anyone having trouble with the left orbit? On my Pro , *every* ball coming down the left orbit hits the little rubber post and drains right down the center. Its damn near unavoidable. I don't *think* it's by design, but I could be wrong.
[quoted image]
Hey OP, I had this same problem. I reached out to Dead Flip who checked with the engineers and they assured him (and me) that it should be a "smooth return to the left flipper". What is happening to you is NOT what should be happening, however the good news is that it's easily fixable.
Under the plastic on the left side is the screw that is holding that orbit guide down, you simply need to take the plastic part off (a few screws and a bolt) and then loosen the screw holding the guide, adjust it so it is not flush with that post. I've done this twice now (admittedly the first time I didn't screw it down hard enough and it misaligned), and after making sure it was very snug on the second go, the ball falls as you would expect it to off that orbit.