I’m getting my location pro tomorrow afternoon. Will have it out at the brewery for everyone to enjoy! Looking forward to it
You're currently viewing posts by Pinsider coz.
Click here to go back to viewing the entire thread.
I’m getting my location pro tomorrow afternoon. Will have it out at the brewery for everyone to enjoy! Looking forward to it
Quoted from Titan_Pinball:Could be an air bubble, but possibly just stretched thin at the tip. Shoot me an email and we'll replace it. [email protected]
When installing flipper rubber you should always "unload" the tip. This means after the rubber is on the flipper, pinch the rubber against the sides of the bat and push it towards the tip of the flipper bat to slack the tip of the rubber as much as possible. It will also help to rotate once a month or so depending on the playing time. The same method can be applied to slingshot rubber as well. I pre-stretch a little bit, then put the rubber on the sling posts and then pull 2 different sides at a time, repeatedly. This should make the tension across the three posts as even as possible. It's a good idea to check the post groove for sharp corners. Star posts and metal posts can have sharp edges to the grooves that cut the “skin” of the silicone ring.
Appreciate the feedback. These are the first I’ve had break so quickly. Only these orange sets. Other colors are holding up just fine.
You're currently viewing posts by Pinsider coz.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/this-is-the-way-the-mandalorian-owners-club?tu=coz and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.