Hi guys, I present to you my version of the grogu.
For the story, I got loaned a mando pro to be able to work on luke's lightsaber, the lender had bought the pin with a grogu and asked me to install it.
I therefore installed the grogu but I did not like it because the grogu moves too much and randomly, it does not stop when it should and the arm blocked by the ramp, I did not like it at all.
so I reconsidered all that.
I created a program that manages so that the grogu triggers at a very precise moment, that it waits to use the force, then starts again to return to its starting position.
I used the capture of the ball for my scenario.
the ball is captured, grogu moves and stops to use the force and does not start again until the ball is released to return to its initial position.
he will therefore move 4 times maximum in a game (4 razor crest multiball)
for the position, why would you want to put it in the same position as the original ???
I rotated it 45° which allows a very simple installation and to move the arm freely, visually, it fits well and grogu is completely free (head ears and arms)
the arm that remains blocked by the ramp will inevitably cause breakage after a while.
the trigger will be done with the powering of the magnet.
it was not easy to find the right parameters so that the triggering was flawless and that there was no electromagnetic disturbance, I spent 3 days on this configuration alone.
I will have an LE model in some time and I should be able to adapt my system to the magnets of the CHILD under the board, if I succeed, and there is a good chance, the effect will be even more fantastically realistic.
this is a short video to see grogu in action, sorry for speaking french but but pictures are enough