Quoted from PaulCoff:Does anyone have a link or video on how to properly put on a cliffy in the shooter lane for Mando?
Thx
Not sure if there is a video but it’s a fairly simple process.
First go under the playfield and remove the two nuts that hold the metal pegs/feet of the apron secure. You can see these legs going into the playfield from the top, look directly under the playfield and you will spot them.
2 screws need taking out do the playfield hanging hooks (the 2 metal hooks that holds the playfield in place at the lockbar receiver)
Now lift off the apron.
From memory I think you need to remove the auto plunger arm, just 4 nuts, then you will spot the 2 metal press screws that are next to the shooter lane/out kicker.
Remove the nuts off those, and gently knock them up out of the playfield.
Fit the cliffy and place the 2 metal press screws through the cliffy to hold it in place, line up the protector so the edge is on the edge of the shooter grove.
Press screws down to hold the cliffy firmly in place. Then replaces the screws on the bottom of the screws and tighten them up they will pull down into the playfield and hold the cliffy rock solid.
Right side (long protector) is even easier, remove a few of the screw along the outside edge of the playfield just enough to loosen the guide slide protector under it and refit screws and tighten down.
Done.