U-Turn guide Washer Fix (approx 10 minutes)
So after getting the ramp back together to trial a one way gate I ended up taking it back off last night to write this up for those that need it. Super easy install should take you 10-20 minutes max depending how much disassembly you decide to do of the right ramp.
First things first locate the washer and nut holding the guide in place, while under the playfield also remove the washer and nut holding down the ramp.
22A0BCA6-031A-40E5-9361-75F1B12019C0 (resized).jpeg
Now drop the playfield down and remove the two screws in the top of the right ramp plastic (ignore the missing screws here, I have removed all the horrible plastic shields and spacers weeks ago)
6E5AE76B-F48D-4069-B2B2-D3B2D47062FC (resized).jpeg
Next unscrew the hex post (it is a single post that runs through the middle plastic, now lift the black bottom plastic up as far as it will go, be careful not to lose the washer.
FB775155-646F-415A-BEA5-0B3006BBEEC6 (resized).jpeg
This next step might vary person to person but if your game has enough play in it you can just push the guide out from underneath enough to slip the washer under and it will pop right back in. I actually found this easier to do with the playfield back in the upright position, as I could push the guide out with one hand and put the washer in place with my other but do what works best for you.
If you don’t have enough play remove the right ramp from the right slingshot post and it will free up the right ramp completely allowing you more access for a little more disassembly.
Put it all back together and BOOM job done, clear coat protected.
B3ECC563-D475-46F2-87A5-A202E39B155A (resized).jpeg
D07ADDEA-08D2-4525-9F32-A1ACEEF043B5 (resized).jpeg