I like those odds - The Mandalorian Owners Club

OP
Quoted from flynnibus:
That looks pretty normal - they are talking about the left ramp entrance.

Thank you. Gonna pop a beer and play some pinball.

#1303 2 years ago

TOM

Thomas3184

Pinside member

Folsom, CA

3y 47,550 472 5 27

Quoted from PismoArcade:
Thank you. Gonna pop a beer and play some pinball.

You should still look at the left ramp entrance on the left side under the metal protector. That’s the only place I have heard of plastic breaking so far.

It looks like a screw hole on one side. Check near any screws on the right ramp too.

#1304 2 years ago

DRD

Insanity_Falls

Inactive member

4y 35,800 267

Quoted from thekaiser82:
Ha. That exact one was loose for me as well. I swapped that one and the one to the left of grogu with green. Looks so much better imo. Hard to appreciate the gentle glow from a photo but you get the idea.
[quoted image]

I thought that might look good, which is why one of the three bulbs stuck in the back of my game was a green one.

#1305 2 years ago

DMB

PismoArcade

Pinside+ Frequent

OP
Quoted from flynnibus:
That looks pretty normal - they are talking about the left ramp entrance.

Thank you for the help!

I could be wrong but I think this may be where it came from. Is this how it’s supposed to look?

327197A6-F4F4-4BCB-93D3-0C76CBDE5761 (resized).jpeg

#1306 2 years ago

CES

Tiki-Ed

Pinside member

Gainesville, FL

4y 36,550 77 2 45

Quoted from PismoArcade:
Thank you for the help!
I could be wrong but I think this may be where it came from. Is this how it’s supposed to look?[quoted image]

I believe so. Mine looks exactly the same.

#1307 2 years ago

CTL

ctl723

Pinside member

10y 51,800 246

Can someone please clarify exactly how to bend the diverter scoop bracket to stop the buzzing? I see the instructions from Stern, but it's not super clear on exactly where to bend. Thanks!

#1308 2 years ago

DMB

PismoArcade

Pinside+ Frequent

Found it! Rough edges and all.

So what do you think? Is this something I should worry about?

2EAFB9B5-E1F1-4003-9623-66D72835C94C (resized).jpeg

#1309 2 years ago

NIC

Tjohejsan

Pinside member

Linköping

8y 33,350 118 5 15

Where can i find info about the moving grogu mod?

#1310 2 years ago

DMB

PismoArcade

Pinside+ Frequent

https://pinside.com/pinball/forum/topic/grogu-modding-thread

Quoted from Tjohejsan:
Where can i find info about the moving grogu mod?

#1311 2 years ago

ELJ

crujones4life

Pinside member

Quoted from PismoArcade:
Found it! Rough edges and all.
So what do you think? Is this something I should worry about?[quoted image]

Take another pic from a little further back. You can probably just ask Stern to send you a replacement plastic. Or is it the ramp? Either way you should be able to get a replacement. I would ask for one even if you have no intention if replacing.

#1312 2 years ago

ELJ

crujones4life

Pinside member

Got an Email from Cliffy today that my ramp protector is on the way and got a call that my Mando Pro will be delivered Thursday! Can't wait!

#1313 2 years ago

???

drwicket

Pinside+ Frequent

Omaha, NE

12y 45,300 159 10

Just got back from picking up my premium. Now just need this work day to get over so I can set it up!!

#1314 2 years ago

APZ

APz

Pinside member

Looks like it was my Mando's time to give up. I think I'll take this to work tomorrow and have our welders take a look at it. The weldings look extra fragile in this one.

IMG_1752 (resized).jpeg

#1315 2 years ago

ELJ

crujones4life

Pinside member

Quoted from APz:
Looks like it was my Mando's time to give up. I think I'll take this to work tomorrow and have our welders take a look at it. The weldings look extra fragile in this one.
[quoted image]

Early run?

#1316 2 years ago

SSG

hiker2099

Pinside+ Frequent

Crestview, FL

2y 76,300 1,109 5 23 1

Mine did that. I used JP Weld and Zip tie.. Works great. I still have the replacement part but figured I'll put it in later.

#1317 2 years ago

APZ

APz

Pinside member

Quoted from crujones4life:
Early run?

Yeah, it's from the first batch of games to land to this corner of the world. I'd be curious to see how the later versions look like.

#1318 2 years ago

BSK

Groo

Pinside+ Frequent

Byron Center, MI

9y 77,300 754 4 8

Mine was from the initial batch of pros and it is still hanging in there.

#1319 2 years ago

ELJ

crujones4life

Pinside member

Quoted from APz:
Yeah, it's from the first batch of games to land to this corner of the world. I'd be curious to see how the later versions look like.

Apparently there is a 4th weld and they are more robust (the welds).

#1320 2 years ago

TOM

Thomas3184

Pinside member

Folsom, CA

3y 47,550 472 5 27

Quoted from PismoArcade:
Found it! Rough edges and all.
So what do you think? Is this something I should worry about?[quoted image]

That looks normal too, keep looking lol.

#1321 2 years ago

???

JCrusher

Pinside member

North Royalton, OH

3y 20,050 48 3

Quoted from AJB4:
I have this problem as well but only the right sided button...

Make sure you're not missing coil sleeves :/ was getting same errors and lots of sticking. No coil sleeves were installed.

#1322 2 years ago

RBM

RobbyIRL5

Pinside+ Frequent

3y 73,300 973 18 31 2

Anybody have issues with the spotlight bulb that points at Grogu popping out? It’s been floating around on my playfield about twice now. I think the shaker motor in this machine (LE) is pretty darn powerful! Rattles the bulb out.

#1323 2 years ago

SEB

Schaitas

Pinside member

Rcho Santa Fe, CA

3y 43,050 92 8 58

Quoted from RobbyIRL5:
Anybody have issues with the spotlight bulb that points at Grogu popping out? It’s been floating around on my playfield about twice now. I think the shaker motor in this machine (LE) is pretty darn powerful! Rattles the bulb out.

Yes. Just set the shaker to moderate. Easy fix.

#1324 2 years ago

APZ

APz

Pinside member

Quoted from Schaitas:
Yes. Just set the shaker to moderate. Easy fix.

The one near Grogu also keeps falling out on the pro.

#1325 2 years ago

OZZ

PoMC

Pinside+ Member

With a Grogu out of the game, there sure is plenty of real estate for another cool mod or something in that spot. Animated Grogu is going in replacing the static figure. But I had some ideas when I saw all the room.

Edit: Who the hell downvotes a simple photo showing a part removed?

9F559F17-8EAF-4325-8DB7-DC3865F675EA (resized).jpegDD7A907A-4F5A-49DE-B9B3-FD8D13A9D8EF (resized).jpeg

#1326 2 years ago

ERW

chuckwurt

Pincinnati

10y 193K 31,342 16 13

Quoted from Schaitas:
Yes. Just set the shaker to moderate. Easy fix.

That doesn’t change the intensity of the shake, just the frequency with which the shaker activates. Strength of the shaker can only be adjusted by making physical adjustments to the shaker. Unless they have changed that with Mando.

#1327 2 years ago

MSL

Medic

Pinside+ Frequent

4y 65,800 718

Quoted from RobbyIRL5:
Anybody have issues with the spotlight bulb that points at Grogu popping out? It’s been floating around on my playfield about twice now. I think the shaker motor in this machine (LE) is pretty darn powerful! Rattles the bulb out.

I used some hot glue and it seems to be staying in place.

#1328 2 years ago

MDK

thekaiser82

Pinside+ Frequent

2y 88,550 1,730 13

Quoted from Medic:
I used some hot glue and it seems to be staying in place.

Same here. Hot glue has held it. I had the shaker off since day one and that bulb still kept coming out.

#1329 2 years ago

XEL

Xelz

Pinside+ Frequent

Snohomish, WA

3y 61,300 874 5

Speaking of shakers, how’s the shaker implementation in Mando?

#1330 2 years ago

OZZ

PoMC

Pinside+ Member

Quoted from Xelz:
Speaking of shakers, how’s the shaker implementation in Mando?

Very well done. I removed my shaker from Stranger Things before trading it and installed it in Mando. MUCH, MUCH better shaker integration in Mando than ST.

#1331 2 years ago

BGM

GoodOmens

Pinside member

7y 40,300 406

Quoted from PoMC:
Very well done. I removed my shaker from Stranger Things before trading it and installed it in Mando. MUCH, MUCH better shaker integration in Mando than ST.

Weird I turned it on and just got violent vibrations/buzzing. I'll have to investigate some then. I pulled mine from a SAM but was assured it was the same motor and had the extension kit for SPIKE. Maybe I have a loose or slightly off weight.

#1332 2 years ago

OZZ

PoMC

Pinside+ Member

Quoted from GoodOmens:
Weird I turned it on and just got violent vibrations/buzzing. I'll have to investigate some then. I pulled mine from a SAM but was assured it was the same motor and had the extension kit for SPIKE. Maybe I have a loose or slightly off weight.

It started shaking on boot up? I'd re-check the connectors, make sure plugged into the shaker connector and it isn't off by one pin over. I didn't know there was an adapter for spike to use the SAM shakers...would've bought a $40 new one I saw at the Allentown show in the flea market.

#1333 2 years ago

BGM

GoodOmens

Pinside member

7y 40,300 406

Quoted from PoMC:
It started shaking on boot up? I'd re-check the connectors, make sure plugged into the shaker connector and it isn't off by one pin over. I didn't know there was an adapter for spike to use the SAM shakers...would've bought a $40 new one I saw at the Allentown show in the flea market.

No, just during the game when it's supposed to. But super intense loud vibrations that would shake the whole machine. Not very pleasant lol. Wasn't like my Star Trek that was sort of a low roll vibration that let you know something happened.

When I ordered my shaker from Stern for my SAM game about two years ago they sent me hardware to put it in a SPIKE game and my SAM. For the SPIKE it was the CAP kit (not needed on Mando, according to Stern support), slightly longer cabinet screws, and an extension harness to reach the node board.

#1334 2 years ago

ERW

chuckwurt

Pincinnati

10y 193K 31,342 16 13

Quoted from GoodOmens:
No, just during the game when it's supposed to. But super intense loud vibrations that would shake the whole machine. Not very pleasant lol.

That’s normal. Dwight likes his shakers intense. Ghostbusters and Munsters are the same. Haven’t seen SW with one.

#1335 2 years ago

TOM

Thomas3184

Pinside member

Folsom, CA

3y 47,550 472 5 27

Quoted from chuckwurt:
That’s normal. Dwight likes his shakers intense. Ghostbusters and Munsters are the same. Haven’t seen SW with one.

Tmnt is pretty intense.

#1336 2 years ago

AMM

Mando

Prestige Pinball

Holly Springs, NC

12y 90,050 4,052 15 23

Quoted from PoMC:
Edit: Who the hell downvotes a simple photo showing a part removed?
[quoted image][quoted image]

Tough Crowd!

-1

#1337 2 years ago

DAZ

kempsuk

Pinside member

Palm Coast, FL

7y 37,050 220 1 1

Edit: Who the hell downvotes a simple photo showing a part removed?
[quoted image][quoted image]

haha... thats hilarious! Too funny! But you're right, who .

#1338 2 years ago

KEV

Kevin_LHeureux

Performance Pinball

Valencia, CA

13y 82,300 1,071 3

I built a kit on Titan for Mando LE in "Beskar Grey" and just finished installing it. Thought I'd share a few images for those considering Titan's. I really like the way it looks with the LE motif.

IMG_4778 (resized).JPGIMG_4779 (resized).JPGIMG_4785 (resized).JPGIMG_4787 (resized).JPGIMG_4796 (resized).JPGIMG_4798 (resized).JPGIMG_4806 (resized).JPGIMG_4818 (resized).JPGIMG_4820 (resized).JPGIMG_4827 (resized).JPGIMG_4837 (resized).JPGIMG_4854 (resized).JPGIMG_4856 (resized).JPGIMG_4859 (resized).JPGIMG_4868 (resized).JPGIMG_4870 (resized).JPGIMG_4887 (resized).JPG

#1339 2 years ago

EVT

Gambeno

Pinside member

Rocky Mount, VA

3y 38,550 235 11 9

Quoted from PoMC:
With a Grogu out of the game, there sure is plenty of real estate for another cool mod or something in that spot. Animated Grogu is going in replacing the static figure. But I had some ideas when I saw all the room.
Edit: Who the hell downvotes a simple photo showing a part removed?
[quoted image][quoted image]

Nice spot for nice big light up tie fighter! I might hunt one down to add purple and red led in...

#1340 2 years ago

DRD

Insanity_Falls

Inactive member

4y 35,800 267

Quoted from PoMC:
With a Grogu out of the game, there sure is plenty of real estate for another cool mod or something in that spot. Animated Grogu is going in replacing the static figure. But I had some ideas when I saw all the room.
Edit: Who the hell downvotes a simple photo showing a part removed?
[quoted image][quoted image]

You could put R2D2 there!

Meanwhile, bulb #1 has reappeared at the most inconvenient of times:
A5501D72-F7FB-492E-BC79-4F1325B11E94 (resized).jpeg

#1341 2 years ago

OZZ

PoMC

Pinside+ Member

Quoted from Gambeno:
Nice spot for nice big light up tie fighter! I might hunt one down to add purple and red led in...

I was thinking along those lines, but maybe Moff Gideon's Tie with an escort?

His big Star Destroyer ship would also look imposing aimed at the player from the back playfield.

#1342 2 years ago

ELJ

crujones4life

Pinside member

Awww yeah! I'm in like Flynn!

20210902_172845 (resized).jpg

20210902_200900 (resized).jpg

#1343 2 years ago

OZZ

PoMC

Pinside+ Member

Has anyone else wished that we got a re-skin of the battlefield upper playfield from the shadow? There’s no shame in revisiting probably the best upper playfield in Pinball and it fits the Theme perfectly with the theme of Mando in a shootout and deflecting blaster shots, etc.

Honestly, I really don’t like flailing away in the upper playfield whether it’s flat or raises and lowers.

#1344 2 years ago

ELJ

crujones4life

Pinside member

Is the left ramp supposed to be off the playfield? The flap touches the ground but the ramp itself is raised above the playfield. I can't hit the left ramp from a cradled ball from either flipper. Do I suck?

#1345 2 years ago

MDK

thekaiser82

Pinside+ Frequent

2y 88,550 1,730 13

Quoted from crujones4life:
Is the left ramp supposed to be off the playfield? The flap touches the ground but the ramp itself is raised above the playfield. I can't hit the left ramp from a cradled ball from either flipper. Do I suck?

Yes the ramp is off the playfield.

#1346 2 years ago

TOM

freddy

Pinside member

10y 131K 5,641

For the Record,
A SHAKER is a must on this title!
the Pinball life shaker ROCKS!!!

#1347 2 years ago

BOB

0geist0

Pinside member

Royal Palm Beach, FL

14y 60,050 1,778 4

Picked up my Premium yesterday

pasted_image (resized).png

#1348 2 years ago

APZ

APz

Pinside member