Quoted from Apollyon:Player One
Ahhh ok thanks.
Quoted from Mando:Yeah I get a lot of rattle too . Maybe all metal ramps that cross
Damn shaker is a bit too fierce.
Had to dial it back to a roll.
Insert cards on the apron look great!
Bought them here on pinside from Mr_Tantrum
Thanks Chris!
F2900B25-7DE1-47B8-91C1-FBBE49E4CD7E (resized).jpeg25820381-95DC-4BA5-AFDF-FB41C08A7BEC (resized).jpegC789F8B6-6F43-42A6-9376-D92C01507ECE (resized).jpegQuoted from Pinball-Obsessed:More pics, under bright light and with the glass off.[quoted image][quoted image][quoted image][quoted image][quoted image]
You get any surprises under the playfield?
No one else is bothered by the typos on the instruction cards?
Says 5 encounters for wizard mode and everything start at center ramp? So much copy paste.
Quoted from NightTrain:What is this anti rattle tape you speak of?
I've just been using 1/2 inch thick felt tape off of Amazon on some of my games as needed.
Quoted from Vino:Damn shaker is a bit too fierce.
Had to dial it back to a roll.
It is ! Xaqery if you listening I really like what the avengers team did with the shaker in that game a little more subtle
Also a lot of my rattle come from the bass of the sub !
Quoted from Vino:Damn shaker is a bit too fierce.
Had to dial it back to a roll.
Crazy shaker on my LE too. My issue is the shaker itself is making a ton of noise. I tested with both BG and PF glass off and it was still there.
I had a similar situation on a DP and just had to tighten that threaded rod a little to settle it down. I took the cover off on the Mando's and unfortunately the shaker has no stabilizing rod. If you run the test and squeeze the 2 mount side together on top, carefully so your fingers don't get whacked by the weights, and the noise goes away, it's something that rod would help with.
Stern's accessory site shows 2 pics with no rod and 1 with rod, so I guess it's whichever supplier it came from. Doubtful I can get a replacement from Stern, so I guess I'll either:
-Deal with it
-Buy a aftermarket shaker
-Do some frontier medicine with a drill and DIY it.
Hopefully some of y'all might have the adjustable version!
Quoted from jaycbarnett:Crazy shaker on my LE too. My issue is the shaker itself is making a ton of noise. I tested with both BG and PF glass off and it was still there.
I had a similar situation on a DP and just had to tighten that threaded rod a little to settle it down. I took the cover off on the Mando's and unfortunately the shaker has no stabilizing rod. If you run the test and squeeze the 2 mount side together on top, carefully so your fingers don't get whacked by the weights, and the noise goes away, it's something that rod would help with.
Stern's accessory site shows 2 pics with no rod and 1 with rod, so I guess it's whichever supplier it came from. Doubtful I can get a replacement from Stern, so I guess I'll either:
-Deal with it
-Buy a aftermarket shaker
-Do some frontier medicine with a drill and DIY it.
Hopefully some of y'all might have the adjustable version!
You sure the weights are centered on their little divots? I had a shaker direct from stern where one weight was ever so slightly off. Loosening the set screw and cranking it down in the divot was night and day difference.
Speaking of shakers - does anyone know if the cap is still required? I have a shaker from an older game I'm moving over and it required the cap kit. Does stern still require that or did they fix the boards to eliminate the issue?
Edit: Pablo got back to me 1 minute after I emailed service and said newer stern games don't require the cap kit.
Quick question to Prem/LE folks.
The scoop makes a buzzing noise when it's "engaged", it was so loud it could be heard over in the middle of play and I have the machine pretty loud. With the glass off, I rolled the ball through the loop and the buzz could be felt on the top of the mech.
I messed with the Up/Down Scoop hold power setting, trying values above and below. I would seem to quiet down and then come back, so I was thinking it was mechanical somehow. I looked under the playfield to make sure the mech looked like the drawing in the manual and all the sleeves/washers/springs were in the correct place. Hmmm...
Anyway, just set it back to default setting, and last night it quieted down on it's own. It's still there a little bit, but not audible over the game in play. Not heard back from Pablo on my email, just wondering if anyone else had this.
Quoted from GoodOmens:You sure the weights are centered on their little divots? I had a shaker direct from stern where one weight was ever so slightly off. Loosening the set screw and cranking it down in the divot was night and day difference.
I've not looked at that, I'll be checking this after work!
Thanks man!
Quoted from jaycbarnett:I've not looked at that, I'll be checking this after work!
Thanks man!
Yea try moving the weights themselves and see if they are ever so slightly loose or if they are not perfectly in alignment with each other. There is a little divot on the rod they are supposed to be set on. Simple fix if that's the issue.
Quoted from jaycbarnett:Quick question to Prem/LE folks.
The scoop makes a buzzing noise when it's "engaged", it was so loud it could be heard over in the middle of play and I have the machine pretty loud. With the glass off, I rolled the ball through the loop and the buzz could be felt on the top of the mech.
I messed with the Up/Down Scoop hold power setting, trying values above and below. I would seem to quiet down and then come back, so I was thinking it was mechanical somehow. I looked under the playfield to make sure the mech looked like the drawing in the manual and all the sleeves/washers/springs were in the correct place. Hmmm...
Anyway, just set it back to default setting, and last night it quieted down on it's own. It's still there a little bit, but not audible over the game in play. Not heard back from Pablo on my email, just wondering if anyone else had this.
Mine had the loud buzzing at first too. I believe it was due to my scoop sticking though. It was a little flaky at first but then it just locked in the up position & would not go down. I manually pushed it down from above & it hasn't returned. I'm assuming it just got wedged in there a little tight.
Quoted from jaycbarnett:Quick question to Prem/LE folks.
The scoop makes a buzzing noise when it's "engaged", it was so loud it could be heard over in the middle of play and I have the machine pretty loud. With the glass off, I rolled the ball through the loop and the buzz could be felt on the top of the mech.
I messed with the Up/Down Scoop hold power setting, trying values above and below. I would seem to quiet down and then come back, so I was thinking it was mechanical somehow. I looked under the playfield to make sure the mech looked like the drawing in the manual and all the sleeves/washers/springs were in the correct place. Hmmm...
Anyway, just set it back to default setting, and last night it quieted down on it's own. It's still there a little bit, but not audible over the game in play. Not heard back from Pablo on my email, just wondering if anyone else had this.
Mine was pretty loud at first too. That has settled down a bit though.
I was playing a mean game on my Mandalorian LE and noticed the shaker vibrating too much as well.........then I woke up and it turned out I was dreaming of owning and playing the LE and it was my dog fuking me on my leg just like the scalpers fuking over the guys that wanted to buy the game and now they are priced 3k higher
I’m good with the shaker level. I don’t see it being too much. Just turn it down to moderate. That might help. I hope he doesn’t change much on the max setting
Quoted from K9Marshal:I was playing a mean game on my Mandalorian LE and noticed the shaker vibrating too much as well.........then I woke up and it turned out I was dreaming of owning and playing the LE and it was my dog fuking me on my leg just like the scalpers fuking over the guys that wanted to buy the game and now they are priced 3k higher
Quoted from Apollyon:Got word today that I made it into the upcoming premium run! Super excited to get it after having a chance to play the pro at a great pinsider's place this past weekend.
Looking forward to getting some time in on your premium upon arrival!
Quoted from Pinball-Obsessed:More pics, under bright light and with the glass off.[quoted image][quoted image][quoted image][quoted image][quoted image]
Now we know your prem looks just like all other prem
Quoted from Pinball-NJA:Anyone else have their upper flippers stop working?
Saw this on the prem I pl
Quoted from Tjohejsan:Now we know your prem looks just like all other prem
You must not be waiting on yours. More pics pls.
That flasher popped out of grogu. Does anyone know what setting to use to test the light? Should I just put hot glue to keep it from coming off? Thanks
Quoted from Medic:That flasher popped out of grogu. Does anyone know what setting to use to test the light? Should I just put hot glue to keep it from coming off? Thanks
I did one dot of hot glue and done.
Quoted from Medic:That flasher popped out of grogu. Does anyone know what setting to use to test the light? Should I just put hot glue to keep it from coming off? Thanks
Search through the thread for the electrical tape method.
Been doing this for years and Pinmonk has a good write up.
Also, could buy these:
https://www.pinballlife.com/stern-led-bulb-retaining-clip.html
Quoted from Yelobird:I did one dot of hot glue and done.
Where did you put the drop of hot glue?
Quoted from thekaiser82:Where did you put the drop of hot glue?
At the side base of the reflector then inserted bulb.
Got a call that Fedex will drop it off tomorrow. Fingers crossed for no damage and a surprise under the playfield. Mainly just for no damage...
Received my premium yesterday! It appears to be playing really well with no rejects. I did lose the flasher, lol. So far no issues. The right ramp is tough to hit! Otherwise, awesome game!
Quoted from Looprunner:Received my premium yesterday! It appears to be playing really well with no rejects. I did lose the flasher, lol. So far no issues. The right ramp is tough to hit! Otherwise, awesome game!
Backhand the right ramp from a cradle with right flipper. Its really easy to get since it needs no rollout from a cradle to hit it.
Quoted from Waxx:Been doing this for years and Pinmonk has a good write up.
https://pinside.com/pinball/forum/topic/fixing-led-bulbs-flashers-that-fall-out-of-spotlights#post-4402506
Also, could buy these:
https://www.pinballlife.com/stern-led-bulb-retaining-clip.html
THX for Sharing
Quoted from RETROCENGO:Hi guys, just reviewed the Mando LE with 6,5 score out of 10, link to the video:
A 6.5 out of 10? Are you for real?
That would put it at #338 in the Pinside ratings. Really???
Quoted from Looprunner:Received my premium yesterday! It appears to be playing really well with no rejects. I did lose the flasher, lol. So far no issues. The right ramp is tough to hit! Otherwise, awesome game!
Does your shooter lane have a little jank to it? Been trying to diagnose a little ping-pong/s curving through the lane after a manual or auto plunge. Shooter tip is dead on center, level is perfect, tried pitch at 6.5-7 at the flippers. Talked to a couple others that noticed the same - doesn’t really seem to impact gameplay but definitely seems like unnecessary wear and tear. Anyone else notice this on any model?
Quoted from NightTrain:A 6.5 out of 10? Are you for real?
That would put it at #338 in the Pinside ratings. Really???
6.5 out of 7.65, they have a weird scoring system over there.
Quoted from vikeking27:Does your shooter lane have a little jank to it? Been trying to diagnose a little ping-pong/s curving through the lane after a manual or auto plunge. Shooter tip is dead on center, level is perfect, tried pitch at 6.5-7 at the flippers. Talked to a couple others that noticed the same - doesn’t really seem to impact gameplay but definitely seems like unnecessary wear and tear. Anyone else notice this on any model?
Mine is the same way, hard to consistently get full super skill shot plunge. Orbits are also rattletraps. still tweaking
I have no idea how Stage 2 of the "You have what I want" wizard mode works. There is nothing in the tilt forums which describes any of the mini wizard modes. After you complete the first 4 flashing shots in Phase 1 to get on the ship, I can't tell what to do. The screen says hit 8 shots, but what shots? When you complete the upper playfield, it says stage complete, but doesn't reduce the number of shots.
The screen does a really poor job of telling you what to do in this wizard mode in particular. There have been times when watching streams that excellent players like Joannes and Jack Danger are in a mode and they have no idea what the hell to do to advance the mode. Seems like there is a bug that needs to be fixed here, or there needs to be a lot better explanation on the screen for what you are to do next.
This is also a bit of the case in Precious Cargo as you are told to hit flashing shots and when you do, nothing seems to happen to progress the mode.
Anyone with their game know how this mode works? Or can you take the glass off and post a summary?
Quoted from NightTrain:A 6.5 out of 10? Are you for real?
That would put it at #338 in the Pinside ratings. Really???
65% is such a crazy rating that I almost want to know his scores for everything. Like is MM a 7/10, "I don't like the Castle is a big waste of space and you just hit it up the middle".
Quoted from vikeking27:Does your shooter lane have a little jank to it? Been trying to diagnose a little ping-pong/s curving through the lane after a manual or auto plunge. Shooter tip is dead on center, level is perfect, tried pitch at 6.5-7 at the flippers. Talked to a couple others that noticed the same - doesn’t really seem to impact gameplay but definitely seems like unnecessary wear and tear. Anyone else notice this on any model?
It does. I didn't notice it until you mentioned it.
Installed - looks pretty good imo. I've been working on other flipper topper designs as well (pulse rifle, blaster, extending the artwork from the lane guides, etc).
thinking about making a small run of these if anyone is interested.
IMG_20210722_182538.jpgIMG_20210722_182548.jpgIMG_20210722_182554.jpgQuoted from NightTrain:A 6.5 out of 10? Are you for real?
That would put it at #338 in the Pinside ratings. Really???
Clickbait.
Not sure if this will be the end placement or not yet for Slave 1. Fits. Not as wild that it covers a little bit of artwork on the plastics and shooter lane. Good size though. Don't know. Will have to see if it stays in or not. Haven't made up my mind yet, but for those looking to mod, here is a pic. Is the seismic charge even in the game??
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/this-is-the-way-the-mandalorian-owners-club/page/14?hl=medic7000 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.