(Topic ID: 292222)

This is the Way - Stern Mandalorian Pinball is Here!!

By zpinman370

2 years ago


Topic Heartbeat

Topic Stats

  • 7,620 posts
  • 817 Pinsiders participating
  • Latest reply 5 months ago by brzezicki
  • Topic is favorited by 159 Pinsiders

You

Linked Games

Topic poll

“This is the Way - Stern Mandalorian Pinball is Here!!”

  • Who's In 440 votes
    45%
  • Who's Out 198 votes
    20%
  • Don't Care 337 votes
    35%

(975 votes)

Topic Gallery

View topic image gallery

mandalorian-mudhorn-1 (resized).JPG
mandalorian-mudhorn-2 (resized).JPG
IMG_4425 (resized).JPG
IMG_4423 (resized).JPG
IMG_4422 (resized).JPG
IMG_4424 (resized).JPG
mythosaur (resized).jpg
IMG_5792 (resized).jpg
manda22 (resized).jpg
IMG_0740 (resized).jpg
IMG_0739 (resized).jpg
IMG_20230922_210840 (resized).jpg
IMG_20230922_205916 (resized).jpg
IMG_20230922_210650 (resized).jpg
IMG_20230714_211645 (resized).jpg
5.42 Mandalorian Manual (resized).png

Topic index (key posts)

2 key posts have been marked in this topic

Display key post list sorted by: Post date | Keypost summary | User name

Post #2976 Super Awesome Pinball Show interview with Brian Eddy. Posted by jellikit (2 years ago)

Post #3298 First look and initial impressions. Posted by ZMeny (2 years ago)


Topic indices are generated from key posts and maintained by Pinside Editors. For more information, or to become an editor yourself read this post!

You're currently viewing posts by Pinsider tdiddy.
Click here to go back to viewing the entire thread.

#257 2 years ago
Quoted from romulusx:

Probably where Kaneda got the idea on a spinning rotating upper playfield!

Bingo!!! I'll be completely shocked if it's really Mando ..... this came completely out of left field about 4 weeks and ppl are eating it up

giphy-17 (resized).pnggiphy-17 (resized).png
-4
#313 2 years ago

How much chatter was there for AIQ ..... I dont remember any ...... it just came out of left field, too much noise for it to be Mando

#321 2 years ago
Quoted from arcadem:

I believe you are wrong sir. It will be Mando but it has been delayed because the artwork had to be reworked to eliminate one character at Disney's insistence because she is no longer in the cast...you know who...more pc at work....

That happen months ago ....no way that's the hang up....it would have be squashed the day she was terminated

18
#341 2 years ago
f9dca823570d51c1ffea3fbb4b72cc4f (resized).jpgf9dca823570d51c1ffea3fbb4b72cc4f (resized).jpg
3 weeks later
#4500 2 years ago
Quoted from chuckwurt:

They were told early June.

Possibly as early as Tuesday

#4523 2 years ago
Quoted from greg92867:

Distributor said an email was sent to them that Pro won’t ship until August.

Yeah ....that's not what my distributor told me

#4525 2 years ago
Quoted from crujones4life:

Sure it's not August for 2nd (larger) run of Pros?

Gotta have the hook up to be in the first run

#4636 2 years ago
Quoted from Gambeno:

Will probably here more tomorrow or Tuesday I'm sure.

Tuesday here I'm expecting

#4643 2 years ago
Quoted from rai:

My only worry is about the upper PF if it’ll be fun or something that’s just meh after a while.

Imo ......it looks more meh.....like how much control do you really have uo there

#4786 2 years ago
Quoted from lodgingdolphin:

It looks like this is the case. On stream Jack short plunged into the mini playfield and there was some sort of sneak in scoring associated with it.
[quoted image]

Yup, I thought this was a cool add in, Imo the pro playfield / layout is the better one

13
#4991 2 years ago

Just need my game to get a proper fitment

20210608_221817 (resized).jpg20210608_221817 (resized).jpg20210608_221820 (resized).jpg20210608_221820 (resized).jpg20210608_221826 (resized).jpg20210608_221826 (resized).jpg
15
#5119 2 years ago

Multiple ball is easy to get too .......but it shoots super smooth......possibly too smooth lol

20210611_220811 (resized).jpg20210611_220811 (resized).jpg
1 week later
#5599 2 years ago

New custom resin based 3d printed stormtrooper transport carrier. This model includes a red led and pigtail to tigh into the G.I., making the installation easy and smooth. Item can be used in multiple locations on the game, so you can choose what you like the best.

Cost is 65.00 with shipping being 10.00 inside the U.S. if your outside the states please send me your address to get a accurate shipping quote.

Thanks again
Tom D
DIDDY'S MOD'S

https://pinside.com/pinball/forum/topic/-mandalorian-stormtrooper-transport-carrier-mod-#post-6347119

20210621_225810 (resized).jpg20210621_225810 (resized).jpg20210621_225826 (resized).jpg20210621_225826 (resized).jpg20210621_225834 (resized).jpg20210621_225834 (resized).jpg20210621_225943 (resized).jpg20210621_225943 (resized).jpg
10
#5853 2 years ago

This is the way ........early development for .....The Foundry

The_Armorer (resized).pngThe_Armorer (resized).png20210627_211004 (resized).jpg20210627_211004 (resized).jpg20210627_211038 (resized).jpg20210627_211038 (resized).jpg
#5855 2 years ago
Quoted from flynnibus:

How about something without the overhead? Seems like that would be a huge line of sight blocker.

There's nothing behind it besides the pops and lanes. The razor crest and right ramp block more.

20210627_213116 (resized).jpg20210627_213116 (resized).jpg
#5869 2 years ago
Quoted from Bellystyle:

Well, I already welded my diverter. Guess I need to come up with my own upgrade for this too. Under 100 plays.
[quoted image]

Smh ...wth

#5871 2 years ago

Our location one has a broken diverter all ready ...probably 300 plays on it

Super exclusive ad from the Pinside Marketplace!
#5908 2 years ago

Early prototyping for Moff Gideons Light Imperial cruiser.... this huge build will run the full length of the right ramp before the cross over. The ball will travel through the inside of the model and come out the Tie fighter launch tube. I also plan to include the imperial transport ship the will mount over the shooter lane to replicate the awesome season finally scene. This mod is going to work best with Mirror blades to give the illusion of a full Imperial light cruiser.....Stay turned for updates

20210630_180214 (resized).jpg20210630_180214 (resized).jpgfile (resized).jpgfile (resized).jpgdownload (1) (resized).jpegdownload (1) (resized).jpeg

10
#5945 2 years ago

The Foundry is now available

https://pinside.com/pinball/forum/topic/new-mandalorian-foundrymod

This is the Way

The_Armorer (resized).pngThe_Armorer (resized).png20210702_101735 (resized).jpg20210702_101735 (resized).jpg20210702_101850 (resized).jpg20210702_101850 (resized).jpg
#6067 2 years ago
Quoted from shaub:

I still think metal habitrails would be (will be) better than the plastics, but after playing Mando for 4 hours the other night, I can't say I even noticed them once while playing.

It's not that noticeable imo

#6073 2 years ago
Quoted from Pinchild:

Wife complained immediately about cross plastics.
She sits on a stool to play and it turned out to be a major obstacle.
So to all you short folks or barstool sitters Beware!
For me the game turned out to be more enjoyable than anticipated.
Plastic not a problem I'm tall.

Screenshot_20210708-125334_Chrome (resized).jpgScreenshot_20210708-125334_Chrome (resized).jpg
12
#6086 2 years ago

In the works for the shooter lane.....early prototype.... rigidity may be an issue but I have a few other ideas for this.

20210708_183436 (resized).jpg20210708_183436 (resized).jpgd368c14d504fc7fa32df366359eae9993c1310a8 (resized).jpgd368c14d504fc7fa32df366359eae9993c1310a8 (resized).jpg
12
#6095 2 years ago
Quoted from Apinjunkie:

This one's got some good potential, I'm sure if it's anything like the others you put together so far the finished version will be impressive. Keep them coming! I just placed my order for a pro, will probably be an October delivery date so until then ,I'll be shopping for mods.

Yeah it's pretty cool man ...imo , still need to add more texture on the base

20210708_221716 (resized).jpg20210708_221716 (resized).jpg20210708_221722 (resized).jpg20210708_221722 (resized).jpg
21
#6216 2 years ago

Update .....time , this will go into our league machine this week for test. Should easily see 100 plays this week. I will follow then, also for pricing I'm trying work it out, it's a pretty tedious to paint and tie on the ropes

20210711_233455 (resized).jpg20210711_233455 (resized).jpg
#6226 2 years ago
Quoted from Apinjunkie:

These look absolutely fantastic. I'm really curious how well they hold up in real world play. When I played the pro last week I had a few balls hop The Rail where these are going to mount and ended up back in the shooter Lane during multi-ball. It may be an area that takes some abuse.

Yeah this is the big question, I'm putting one in our league machine to see how it goes.also trying to figure out a way to reinforce the sakes

#6231 2 years ago
Quoted from freddy:

If they were pined.
Basically a nail up thru stake.
If you could print them hollow and insert a nail or metal pin Up thru bottom with rubber cement I believe that would keep them from snapping off.

Yeah I was thinking using a finishing nail or something like that

#6256 2 years ago

Finally got caught up on printing, so I was able to run the rest of Moff Gideons Light cruiser. And this thing is epic huge, there's still a lot of work to be done on this one and I have no clue on pricing but I would probably guess that it will be a limited run for them. I know there will be questions on site lines, I'm 6ft and the only issue I the right target next to the upper flipper.

I will report back when I have it dialed in 100%

20210713_070123 (resized).jpg20210713_070123 (resized).jpg20210713_070129 (resized).jpg20210713_070129 (resized).jpg20210713_070501 (resized).jpg20210713_070501 (resized).jpg

file (resized).jpgfile (resized).jpg
#6258 2 years ago
Quoted from KozMckPinball:

Seems like a Pro model mod only as the rotating (pitching) playfield will impact it?[quoted image]

Yes this will be a pro only

#6260 2 years ago
Quoted from Jeffswack:

Two problems on my Le. The large bulb pointing to grogu keeps falling out.
2, when shooting to upper playfield, nearly 50% of the shorts bounce and come right back.
Any help?

There should be a metal bracket that holds the flasher in..... possibly it's not tight enough or not even present

1 week later
11
#6514 2 years ago

This should be the final version for the Helmets mod....the original version was fully printed in resin. This meant the stakes weren't as tough as they needed to be. The new version is printed in 2 pieces and the stakes themselves are steel, which will definitely an improvement. The current version is in the league machine and Mando is in the bank this week so it will get a ton of plays on it. I would imagine by the weekend I will know of I feel confident enough to start producing them.

Thanks again
Tom D
DIDDY'S Mods

20210720_113516 (resized).jpg20210720_113516 (resized).jpg20210720_113521 (resized).jpg20210720_113521 (resized).jpg20210720_113526 (resized).jpg20210720_113526 (resized).jpg
#6538 2 years ago
Quoted from Raiders36:

That looks amazing. sign me up for a few of them. Just tell me who and where to pay. Nice work. Will fit in to the game perfectly.

Thanks man, it's a really cool piece

#6680 2 years ago

Stormtrooper helmets mod info

https://pinside.com/pinball/forum/topic/-mandalorian-stormtrooper-helmet-spikes-mod-#post-6406570

Thanks again
Tom D
DIDDY'S Mods

409c3d3e-917d-459c-b8bf-c4480566b6c7_screenshot (resized).jpg409c3d3e-917d-459c-b8bf-c4480566b6c7_screenshot (resized).jpgd368c14d504fc7fa32df366359eae9993c1310a8 (resized).jpgd368c14d504fc7fa32df366359eae9993c1310a8 (resized).jpg20210720_113516 (resized).jpg20210720_113516 (resized).jpg20210720_113521 (resized).jpg20210720_113521 (resized).jpg20210720_113526 (resized).jpg20210720_113526 (resized).jpgreceived_1204626616649226 (resized).jpegreceived_1204626616649226 (resized).jpeg
1 month later
#7135 2 years ago

Working on Slave 1 for all models, I figured the price version will go into the back and the Premium/LE (the wings and cannons will be adjusted to horizontal fight on the premium) can be behind the Razor Crest. This model is in very early development, with more detailing and leds in the cannons and engine's

20210827_232810 (resized).jpg20210827_232810 (resized).jpg20210827_232957 (resized).jpg20210827_232957 (resized).jpg
#7141 2 years ago
Quoted from pinmister:

I think yours may be a little too big. It definitely will not fit on Premium/LE because of the tight gap between upper and back of machine. I was unable to have my Slave 1 in the upright position and had to flip it to make it fit. The larger one also covers up the fighters and I wanted to keep it as close to backdrop scene as possible with smaller Hotwheel version.
[quoted image]

On the Le I planned on putting behind the Razor Crest..... I really wanted to put it over the plastic on the left side where it says bounty hunter..... but I'd need to scale it down... this would probably be the easiest thing to do but I don't want to lose detail and the capability to install Leds in it

2 weeks later
#7291 2 years ago

Almost ready

20210914_170210 (resized).jpg20210914_170210 (resized).jpg20210914_170215 (resized).jpg20210914_170215 (resized).jpg20210914_170220 (resized).jpg20210914_170220 (resized).jpg
#7293 2 years ago

Slave 1 is ready to go

Information can be found here

https://pinside.com/pinball/forum/topic/new-mando-slave-1-#post-6502317

Thanks
Tom D
DIDDY'S MOD'S

20210916_193152 (resized).jpg20210916_193152 (resized).jpg20210916_193205 (resized).jpg20210916_193205 (resized).jpg20210916_193214 (resized).jpg20210916_193214 (resized).jpg20210916_193802 (resized).jpg20210916_193802 (resized).jpg20210916_193809 (resized).jpg20210916_193809 (resized).jpg20210916_193908 (resized).jpg20210916_193908 (resized).jpg
#7295 2 years ago
Quoted from KozMckPinball:

Nice. I assume it fits on the Premium/LE as well. Any chance you can hollow it out in the cockpit and install a clear shield there?

It fits all models, as for hollowness ot the cockpit. There's really not much room behind that area, the leds take up that space

Promoted items from the Pinside Marketplace
€ 110.00
Playfield - Toys/Add-ons
Pino Pinball Mods Shop
Toys/Add-ons
$ 7.95
Playfield - Toys/Add-ons
ULEKstore
Toys/Add-ons
8,240 (OBO)
Machine - For Sale
St. Augustine, FL
$ 8.00
Cabinet - Other
NO GOUGE PINBALL™
Other
From: $ 12.00
Flipper Parts
Precision Pinball prod.
Flipper parts
5,000
Machine - For Sale
Portland, ME
$ 20.00
Cabinet - Other
NO GOUGE PINBALL™
Other
$ 110.00
Playfield - Toys/Add-ons
Diddy's Pinball Mods
Toys/Add-ons
$ 60.00
Cabinet - Sound/Speakers
Pin Wiz Mods
Sound/Speakers
$ 9,799.00
Pinball Machine
Gameroom Goodies Arizona
Pinball Machine
$ 20.00
Playfield - Toys/Add-ons
WilliPinball Mods
Toys/Add-ons
$ 29.99
Playfield - Decals
Cento Creations
Decals
7,000
Machine - For Sale
Port Charlotte, FL
$ 427.00
Cabinet - Sound/Speakers
PinWoofer
Sound/Speakers
From: $ 6.00
From: $ 35.00
Cabinet - Armor And Blades
arcade-cabinets.com
Armor and blades
$ 7.95
Playfield - Toys/Add-ons
ULEKstore
Toys/Add-ons
$ 495.00
Playfield - Toys/Add-ons
CRCades
Toys/Add-ons
€ 70.00
Playfield - Toys/Add-ons
Pino Pinball Mods Shop
Toys/Add-ons
9,250
Machine - For Sale
San Diego, CA
From: $ 15.00
Playfield - Other
Rocket City Pinball
Other
$ 65.00
Playfield - Toys/Add-ons
Diddy's Pinball Mods
Toys/Add-ons
$ 85.00
Playfield - Toys/Add-ons
Diddy's Pinball Mods
Toys/Add-ons
$ 19.95
Cabinet - Shooter Rods
Pinball Life
Shooter rods
€ 90.00
Playfield - Toys/Add-ons
Pino Pinball Mods Shop
Toys/Add-ons
$ 5.00
Cabinet - Decals
Pinball Fuzz
Decals
$ 19.95
Cabinet - Other
Pin Monk
Other
$ 30.00
Cabinet - Decals
Inscribed Solutions
Decals
From: $ 30.00
Playfield - Toys/Add-ons
JK Pinball
Toys/Add-ons
$ 8.00
Cabinet - Other
Mooshue's Market
Other
Hey modders!
Your shop name here

You're currently viewing posts by Pinsider tdiddy.
Click here to go back to viewing the entire thread.

Reply

Wanna join the discussion? Please sign in to reply to this topic.

Hey there! Welcome to Pinside!

Donate to Pinside

Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!


This page was printed from https://pinside.com/pinball/forum/topic/this-is-the-way-stern-mandalorian-pinball?tu=tdiddy and we tried optimising it for printing. Some page elements may have been deliberately hidden.

Scan the QR code on the left to jump to the URL this document was printed from.