You need to adjust the guide to the right (red arrow). So the ball doesn't bounce off the post (yellow arrow).

3ba3b75f65e552ffabf1d4f9fe9a980c8bc93e21 (resized).jpg

Awesome! Thanks for the quick response, that was a quick fix, now I see that it did bend inwards a bit, never thought that a possibility.. now plays like a charm..

image (resized).jpg

I've got an LE and just started playing it. Got around 20 games or so and then started to get this happening when hitting a flipper:

Any idea what switch might be going off? Pretty sure I'm not supposed to be cranking up the beskar by hitting the flipper buttons!

1st thing to check is : a too sensible switch

Earlier post someone said the target by the pops tends to be sensitive and add Beskar. Check adjustment / sensitivity

Go into switch test mode and hit the side of the cabinet near the flippers as if you where flipping see what switch activates on screen.

Yes there is a 2 blade normally open switch behind the foundry/left ramp on the ball guide about mid to the 2 pops that registers Beskar from a ball hitting it or pop vibration maybe from pops hits. It probably needs to be manually opened a little so a general machine vibration does not make the switch. Good find.

Thanks for the quick replies! Turns out it was that leaf switch in between the 2 pop bumpers. It was just a little too close, separated it a tiny bit and it's all good and everything is working fine again.

mando 3 (resized).JPG

After seeing Rush I am once again like I was when Godzilla was revealed really happy I took the plunge on Mando. Rush looks great but it also looks like nearly every other Borg game layout wise, super happy with Mando’S very different feeling layout.

I don't know what it is but I cannot get enough of Mando. The layout is so unique and different it has really kept my interest. I thought the Led Zeppelin honeymoon stage lasted long,but now Mando honeymoon seems to never end. Once you get to know the shots, it really is a spectacular shooting game. Godzilla did zero for me(mainly because of theme/layout).

I am a RUSH fan but I am sitting this one out. I don't know what is going on but my passion is lagging lately. I have had little interest because of price increases,etc. I guess I still have not gotten over the fact that pro's are selling for LE prices? I think RUSH looks fun and I look forward to playing it in person to truly judge it. I will say-the reveal did not knock my socks off. It looks like Tron and LOTR had a baby and ripped off Led Zeppelin's expression lighting. The middle ramp with magnet seems like a re-used feature from back in the day(been there done that-snooze fest). Now let's talk about the art-what were they thinking? I love the steam punk-super cool but they ruined it with the cheesy cartoon characters in the center of playfield. To me it is an eye-sore and I am getting tired of Stern's cartoony art ruining an otherwise great machine(think Spiderman vault/Aerosmith art). Just look how tasteful the band member pics are on Led Zeppelin v.s RUSH. RUSH is the best three member band to ever live and Neil is the best drummer to ever live but for some reason I am not feeling this one and do not have any FOMO. Looking forward to playing it, but unfortunately this one is not on my radar yet.

Mando for the win

Amen Brother! (resized).jpg

LZ band member art (resized).jpg

Rush cringe (resized).png

That’s the funny thing about Mando, it is another fan layout but the genius in the design is the shots are different distances from the flippers.

It mixes up the feeling of the shots, it also helps that the majority of all the other recent sterns have had a wide open middle with the shots all the way at the back, Mando mixes that right up!

Can someone explain how the Razor Crest gate works? My Mando Pro is not registering Razor Crest hits.

It looks like there is a magnet that is supposed to trigger something, but I don't understand how it works. From the schematics, Part 2 is a magnet behind the target and Part 14 is a "Mag Sensor", but just looks to be a metal rod. There isn't anything in the gate connected to any wires.

Any ideas on how to fix or even what the problem is. Here are some pics of the disassembled mech and the schematic.

Thanks for any help!

Screenshot_20220105-171025 (resized).png

PXL_20220106_021337385 (resized).jpg

PXL_20220106_021521560 (resized).jpg

PXL_20220106_021528557 (resized).jpg

I have taken the razor crest assembly completely apart for my playfield protector install. Like you, I am not sure how it works. For Razor Crest multiball qualification, I think the ramp optos are utilized to count the number of times the ball goes up and around the center ramp behind the Crest. The up target (is that what Brian Eddy called it in the gameplay reveal?) does not even come into play I guess for multi-ball qualification is what I am stating. I think the up target has sensors to determine if the razor crest up target was hit for hurry-ups only. Are you still getting your multiballs even with this issue?

Probably I am showing my na·ive·té here but there are 2 screws protruding behind the up target, shown also in your picture, one screw is longer than the other. Maybe in the factory they got the screws mixed up on yours. The longer screw is at the bottom on mine as I re-assembled it. Maybe that's what registers an up target hit, the magnet hitting the screw and yours is the too short one to make the connection. Or maybe the up target is not supposed to magnetize to the screw and the magnet is supposed to swing up to the little circuit board and the shorter screw is supposed to be at the bottom so as not to interfere with the swing range. Really I have no idea either.

I re-assembled it and still no dice.

When I shoot the Razor Crest shot the optos in the ramp are registering, but it just builds the award, does not give hits towards the Razor Crest multiball. I think it's a combination of the Razor Crest target with the ramp optos that builds the multiball award; if you don't hit the RC target cleanly it just builds award(?). I don't know the rules well enough to know...

Looking at the manual and also the mech itself on my LE, is it some sort of magnetic switch? There should be a little metal nut on the back of the swinging target is yours in place?

I might be totally wrong about it being.a magnetic switch but for the life of me I can’t see a switch on the swinging target and the manual mentions a magnetic sleeve.

68560B45-0A5A-49DF-AF62-C1F8CF8255D0 (resized).jpeg

Found a pro in stock just ordered it. Thinking wire forms, and cliffys will be first.

https://pinside.com/pinball/forum/topic/mandalorian-pro-razor-crest-hit-target-not-working

Cool I was right.

So if the screw is supposed to be magnetised I bet that is the issue for some. Either that or there solder has chipped so the magnetic switch doesn’t detect the screw.

When grogu awards light heal, the outlanes don’t actually light heal
Is this a code thing or is mine broken or something?

Nah it's not just you, it's a bug. Dwight is aware of it - so we should see it fixed in the next update.

Speaking of grogu awards, what do you guys think of the duration of the award animation? Seems to hang around for a bit too long in my opinion.

No biggie but the callouts ending hurry-ups are not synch'd to gameplay either, Carl Weathers' countdown callouts end but a subsequent shot registers to the task anyway a second or two later.

The video clip right after encounter mode is reminding me of watching the new Book of Boba Fett on Disney Plus. If you guys have not checked it out yet and you dig the Mandalorian series-must check it out!

Yes! Too long. Same with encounters screens.

Posted in the owners forum yesterday and havnt got a response:

Anyone have a fix for the Encounter mech binding? It will not raise high enough to release the ball and search won’t find it occasionally. Pretty maddening. When I read it by hand it will bind about 4/10 times.

The encounter diverter is only a plunger/coil, there has to be something rubbing/getting in its way, I would strip out the ramps and take a look personally

Is it missing the shaft spring?

No, the spring is there. I’ll prob just have to rebuild it.

I would mate like I recommended above, it’s a simple coil mech, so if you can’t see what’s causing the binding/restriction of it disassemble the ramp and get a better look.

The main ramp is super easy to take apart and remove mate, I’ve had the whole thing out so if you need anything just ask.

Gday mate,
We had same issue on our Premium where the ball got stuck all the time when attempting to enter the helmet.
The steel ramp diverter is held by 2 screws to the backboard, we loosen the top screw and removed the bottom one and added a washer between the back of the bracket and headboard shown below with red arrow.
This raised the ramp enough to allow the ball to roll into the helmet everytime. Very quick and easy to do.

2021-11-06 11.02.21 (resized).jpg

2021-11-06 11.11.14 (resized).jpg

2021-11-06 11.11.24 (resized).jpg

Thanks ya’ll! Got it all sorted

What was your fix?

The ball lock mech was hitting the plastic behind the back board. I pushed the plastic back and bent the entire mech slightly forward.

Anyone have issues getting the super jackpot to register on the Pro model?

It seems like it is somewhat intermittent, but if I hit it with a strong/fast shot, it seems to register like 50% of the time. The switch definitely works and if I go through diagnostics it all seems good.

I feel like I have seen it most commonly be an issue trying to collect the supers during/after a multiball, so I don't know if it *could* be software related. Perhaps the rollover just needs some adjustment though.

I would try adjusting the leaf switch first and see if there is a change in behaviour.

It happens on many games, including mine. The geometry of the shot is causing fast balls to rise up and not activate the switch. Two things you can do. First is to gently bend the end of the switch up (it’s not a leaf switch) so the ball can trigger it. The second option is to put something along the rail that slows the ball down, perhaps a piece of felt or magnetic strip. Something like this might work, I’ve used it in iron man to keep balls from flying off the left ramp and in TZ to prevent rejects for the upper right ball lock shot. I have not tried it yet in mando.

https://www.homedepot.com/p/Master-Magnet-1-2-in-x-30-in-Magnetic-Tape-Roll-96264/203613124?source=shoppingads&locale=en-US&pla&mtc=Shopping-VF-F_D29A-G-D29A-Multi-Multi-NA-Feed-PLA_LIA-NA-NA-MinorAppl_Special_Buys&cm_mmc=Shopping-VF-F_D29A-G-D29A-Multi-Multi-NA-Feed-PLA_LIA-NA-NA-MinorAppl_Special_Buys-71700000042813121-58700005464629311-92700067963002094&gclid=Cj0KCQiA8vSOBhCkARIsAGdp6RR6wNX_1MkaPLdZGWgj_Bce6vuZToGWoT_lABn47aM_Nix66GQQ8V4aAnAzEALw_wcB&gclsrc=aw.ds

Was at a collector store and saw the Mando Hot Toy for the first time in person. Wow the detail is absolutely amazing, and had me thinking it would look good as a potential topper for the game. I thought well it would be cool on top of machine but people would not be able to see the detail and it really belongs in a glass display case. I want one now after seeing it in person

Mando Hot Toy (resized).jpeg

How is it secured? Always worried something like that would fall off and smash the playfield glass.

I have all sorts of toys(#crap) on top of some of my machines. I simply secure them with double sided black commercial velcro. They are solid and stay put and can be removed easily.

Stern really needs to get the topper going for Mando, I am not a topper guy(just cheap junk on top) but from the sounds of it-it sounds cool.
I think the Wh20 topper is one of the only ones I really appreciate-it is a work of art(maybe Mando topper will impress me with interaction?)

I really hope that we see the topper soon. The BKSoR topper is the best in my opinion. Had a BKSoR and the knight on top with his call outs always made me laugh. Most toppers are overrated pieces of plastics that are way to expensive. I am currenly making my own Ghostbusters topper and will do Guardians after that, if Mando is not here after that, I probably start one on my own. Just crazy how long these things take. Btw yesterday chapter 5 of Book of Boba Fett, awesome, the big guy is back and better then ever!

Just heard from FlipNOut that my premium is ready for pickup. RIP my ability to focus at work today!

Just to follow up, the magnet tape didn’t work as I thought it might. Instead, just simply removing the switch and bending it so it’s more sensitive resolved the issue. Registers every time now.

I have seen your participation in threads and can tell you are a huge Star Wars fan. I can just say you are going to shit your pants on how cool Mando is. Well worth the wait and I feel your excitement-good stuff. When you get it-MUST check out alternative soundtrack in menu settings-crank it up!

For your Mando fans out there who have not seen episode 5 of The book of boba Fett, you will want to keep your eyes out for a naboo fighter ship to mod. I've probably said too much

The thrust capacitor!

That’s for the BOBF pin

So you haven't seen the episode.

Saw it day of release but my Mando pin has a big razorcrest front and center.

If BOBF is any where near as popular as Mando we will see a BOBF pin and if episode 6 carries episode 5 forward it could all make a nice little mode

Sorry if this has been covered. I put a deposit down on a Mando Prem in May of 2021. My distributor just called to say it’s available now but the new price is substantially higher.
Should I be paying the 2021 price or the new price due to almost a year delay? Do I have the right to get my deposit back?
Thanks for your opinions.

BOBF needs a second season before stern will make it