Quoted from cosmokramer:Installing new side rails. This is done with two sided foam tape applied in the inside of the rail....
[quoted image]
Then I apply a second tape because I have had the backing tear off while pulling it in the middle of installation. That sucked...
[quoted image][quoted image]
Then I pull about 6 inches of backing off and fold it so it faces down...
[quoted image]
Then simply put the rail in position and install the bolt but dont tighten it, pull on the piece of backing that is hanging down while pressing the rail in place...
Easy...[quoted image]
Suprised you didn't go with powder coating .