(Topic ID: 43909)

Theatre of Magic Club

By Nilroc

11 years ago


Topic Heartbeat

Topic Stats

You

Linked Games

Topic Gallery

View topic image gallery

LR (resized).jpg
20240407_191154 (resized).jpg
20240407_191149 (resized).jpg
20240407_191103 (resized).jpg
20240407_191058 (resized).jpg
20240407_170845 (resized).jpg
tom2 (resized).jpg
tom1 (resized).jpg
IMG_9247 (resized).jpeg
IMG_9231 (resized).jpeg
IMG_0920 (resized).jpeg
DSCN3296 (resized).JPG
DSCN3295 (resized).JPG
DSCN3294 (resized).JPG
DSCN3293 (resized).JPG
DSCN3292 (resized).JPG

You're currently viewing posts by Pinsider gliebig.
Click here to go back to viewing the entire thread.

#454 8 years ago
Quoted from volkdrive:

1.3 is enough but if you want the spinning saw blade, you will need 1.4h and the updated u22. I have the blade and its very good mod, quite interactive and eye catching. Bought mine from Greg at pinballpro. And yes the color dmd for sure! Plus they just released an updated software for this game's color dmd

I'm new to pins and just picked up a TOM. Could someone explain this 1.3/1.4 stuff? What does it do,where do you get it....

#462 8 years ago

I have switch errors on my slings and pops. I cleaned them and made sure that the spacing is good. Everything works in test mode. Not sure what I should try next?

#464 8 years ago

Does this plug in the backbox somewhere? I found it dangling...

tom.jpegtom.jpeg
tom2.jpegtom2.jpeg

#468 8 years ago

Which one should I put back in?

TOMramp.jpegTOMramp.jpeg

#469 8 years ago
Quoted from gliebig:

Does this plug in the backbox somewhere? I found it dangling...
tom.jpeg (Click image to enlarge)
tom2.jpeg (Click image to enlarge)

bumpy bump. ?

#470 8 years ago

I installed lighted flipper buttons today. Never had a problem with them on my NGG or Congo. I followed the instructions, turned the power on and it keeps blowing fuse f116. Not sure why.

2 weeks later
#472 8 years ago

Flasher location page 2-45, #23 says Save Post Flasher but it's not on the diagram to the right. Which bulb is that?

2 weeks later
#475 8 years ago

Out of nowhere yesterday, my TOM starts giving me the Slam Tilt. I have to restart the game. I don't even nudge it. What is causing that and how do I stop it?

#479 8 years ago

I found it. It trips every time I hit the white left stand up target in front of the left ramp. I just replaced those yesterday. Loose connection? Wired backwards? It only has two wires going to it.

#481 8 years ago

I probably screwed that up. Will take a look tonight. Thanks for that pic.

#482 8 years ago

Fixed it. Yay. Thank you for the help fellers.

#483 8 years ago

My nephew enjoying some TOM.

matt.jpgmatt.jpg
matt2.jpgmatt2.jpg

#485 8 years ago

That does look like it plays fast.

#488 8 years ago

Dumb question: What causes the 100million jackpot callout?

#490 8 years ago

Ok. That's what I thought.
Thanks.

1 month later
#519 8 years ago

One shot away from Grand Finale yesterday and I blew it. Grrrrrr.

1 week later
#542 8 years ago

Color DMD installed. Looks great with TOM.

tomdmd.jpgtomdmd.jpg

#544 8 years ago

Yup.

#546 8 years ago

Didn't get to finish it exactly how I wanted because I ran out of bulbs....

tom3.jpegtom3.jpeg

tom4.jpegtom4.jpeg

1 week later
#551 8 years ago

No idea. I just have a big Tupperware full of a mix of Cointaker and Comet stuff.

#556 8 years ago
Quoted from GameVault:

...I have to decide which mods to do as time goes on.

Color DMD, Mirror Blades and LED's!

1 month later
#577 8 years ago

How do I adjust the angle of the trunk? When it's on the open side it's lined up pretty well, but when it rotates, it's off by a bit.

#581 8 years ago

My cousin comes over last night. Never played TOM before and throws up a 3 billion game crushing my high score.

1 month later
#660 8 years ago

^I see that those inserts require a clear coat or mylar overlay. I'm guessing mylar would be the easiest? Do they make inserts where that is not needed? I've never done this before and I do have two or three that could be replaced.

N/M I see there is a laminated set available also.

1 week later
#705 8 years ago

The LED on the board that controls my left drain magnet is stuck on. No matter how I adjust it, the LED remains lit. Does any company sell those replacement boards?

Is this it? Is there a difference between the right and left one?
http://www.marcospecialties.com/pinball-parts/A-18543.1-2

#708 8 years ago

Will do. Thanks. Figures. I just rec'd an order from them the other day.

#714 8 years ago

Holy crap

#727 8 years ago

My left outlane magnet fires fine but many times doesn't catch the ball. Sometimes when it does, the ball wobbles a lot and winds up draining anyway. Is there a way to adjust it somehow?
I put in the pinbits eddy board and a new magnet.

1 week later
#740 8 years ago

What does the OCD do? I LED my TOM with standard bulbs. Looks fine to me.?

#749 8 years ago

Is there a way to increase the Theatre jackpot? Seems like mine is always ~50mill.
I'm trying to beat my cousins score he put on my machine. What are some big point scoring strategies?
Hit wiz mode this morning and immediately drained. Wawaa. Even still, I only had 1.6 bill points. That's over a billion short of where I need to be.

#751 8 years ago

Any mod to fix the ball going through the pops without hitting anything? Always seems to happen during straight jacket escape.

#755 8 years ago

Why is that right ramp so hard for me to hit with any consistency? grrr

1 week later
#775 8 years ago

Does the clock mod work with the game clock?

#777 8 years ago

Gotcha. I was wondering if the clocks hands moved as you advanced the clock shots. That would be pretty badass.

3 weeks later
#809 8 years ago

Auto eddy sensors are great.

1 month later
#839 8 years ago

When I shoot the left loop, that little flappy gate thing keeps blocking the ball from returning to the right rail.

#842 8 years ago
Quoted from lyonsden:

It is controlled by a small cool. Check to see if the coil is working. Then check that the spring is attached. Then check if the mechanism is not binding. I seem to recall that a part in there can flip and jam the mechanism.

Thanks. I'll look into.

#845 8 years ago

All these games I've put on TOM and I don't know exactly what I need to do to light extra ball.?
I get it occasionally but not sure how.

#847 8 years ago

No wonder I don't get it more often. I hate that right orbit shot.

#849 8 years ago

Angle. I thought my flip was aligned properly. Maybe I'll post a pic. I can loop the left side one after another but right side....Grrrrr.

#852 8 years ago

I'll try the toothpick. That's a good idea. I was just eyeing it, but depending on the angle, I can see how the visual could be off a bit.

#855 8 years ago
Quoted from lyonsden:

It is controlled by a small cool. Check to see if the coil is working. Then check that the spring is attached. Then check if the mechanism is not binding. I seem to recall that a part in there can flip and jam the mechanism.

Got it working. . The switch behind the flap was jammed. Thanks for the help.
G

2 weeks later
#869 8 years ago

What do you have to do to complete the GF?

#871 8 years ago

Same here. I've reached it a few times and then drained. If you reach it on ball 2, then drain, is it over or does it stay active for the next ball? I've only reached it on my last ball.

#873 8 years ago

Midnight Madness seems to be the toughest for me to get. I usually hope to get it as a reward in the basement. I can shoot the left loop repeatedly and knock out Theatre easily. The right loop, I hit that like one out of five tries.

1 week later
#898 8 years ago

Does it make it partially up the ramp then come back down or not get past the gate at all?

3 weeks later
#911 7 years ago

What does the Poof target do? I didn't even know it existed until today.

#916 7 years ago

DAMN! Spill it. How'd you score that?

#918 7 years ago

I shouldn't have fixed the gate at the top of the rollovers that was preventing the ball from getting up the return ramp. I was getting some crazy good Xbonus multipliers.

2 months later
#1003 7 years ago

I put sticker ones on without removing the playfield. Easy peasy.

#1009 7 years ago

How frequently do y'all reach the wizard mode?

5 months later
#1415 7 years ago
Quoted from billsfanmd:

Trying to decide next pin. Tom or SM? Looking in md pa va area.

Have you played much TOM? You're welcome to come over and put some time on mine if you want.

3 weeks later
#1515 7 years ago

Mine is a drain monster. GC score on mine us under 3bills.

2 months later
#1715 7 years ago

I finally beat the GC score my cousin put up last year. Oh what a feeling. I was getting so nervous when I knew I was getting close. Finally have my initials back at the top on all my pins.

20170330_184431 (resized).jpg20170330_184431 (resized).jpg

1 month later
#1791 6 years ago

I put some stick-on foam around the bottom inside.

5 months later
#2165 6 years ago

I did it once when my control gate was stuck closed.

1 month later
#2206 6 years ago

I need a Spell Magic and Spirit Ring replacement. Does anyone know where I can get them? I assume I'll have to break down and pay for an entire set, but I'd like to get these two taken care of. They are the only ones not looking good on mine.

TOMstickers (resized).jpegTOMstickers (resized).jpeg

7 months later
#2496 5 years ago

Get a color DMD in that thing!!

3 months later
#2579 5 years ago

I need the Spell Magic and Spirit Ring decals.

9 months later
#2820 4 years ago

Left magnet stopped catching the ball. Sounds like it activates but doesn't grab it. Has auto eddy board.

4 months later
#2865 4 years ago
Quoted from SDAmusements:

Does anyone have or already done a scan of the Spirit Ring area, Im trying to do a small overlay. I already have the insert sticker.[quoted image]

Where did you get the insert sticker? Wish I could buy them individually as I only need those two in your pic.

Promoted items from Pinside Marketplace and Pinside Shops!
$ 109.99
Lighting - Led
Lighted Pinball Mods
 
9,000 (Firm)
Machine - For Sale
Manteca, CA
$ 119.99
Cabinet - (Alt) Translites
FlyLand Designs
 
$ 85.00
Boards
Pinball Haus
 
€ 40.00
Playfield - Toys/Add-ons
Pino Pinball Mods Shop
 
$ 84.99
Playfield - Decals
FlyLand Designs
 
Wanted
$ 29.50
Playfield - Plastics
Pinball Haus
 
$ 130.00
Playfield - Plastics
Pinball Haus
 
$ 11.95
$ 275.00
Lighting - Interactive
Professor Pinball
 
€ 150.00
Playfield - Toys/Add-ons
TheDudeMods
 
$ 69.99
Playfield - Toys/Add-ons
Lighted Pinball Mods
 
8,900
Machine - For Sale
Sandy Springs, GA
From: $ 55.00
Gameroom - Decorations
Pinball Photos LLC
 
$ 69.95
Playfield - Toys/Add-ons
Hookedonpinball.com
 
$ 38.00
Cabinet - Other
Pinball Mod Co.
 
8,199
Machine - For Sale
Boca Raton, FL
$ 1.00
Pinball Machine
Pinball Alley
 
$ 9.95
Eproms
Pinballrom
 
$ 47.99
Lighting - Interactive
Lee's Parts
 
$ 225.00
Cabinet - (Alt) Translites
FlyLand Designs
 
$ 69.99
Playfield - Toys/Add-ons
Lighted Pinball Mods
 
From: $ 10.00
Playfield - Protection
UpKick Pinball
 
$ 10.00
Cabinet - Other
Filament Printing
 
From: $ 17.99
$ 11.95
Playfield - Toys/Add-ons
ULEKstore
 
Great pinball charity
Pinball Edu

You're currently viewing posts by Pinsider gliebig.
Click here to go back to viewing the entire thread.

Reply

Wanna join the discussion? Please sign in to reply to this topic.

Hey there! Welcome to Pinside!

Donate to Pinside

Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!


This page was printed from https://pinside.com/pinball/forum/topic/theatre-of-magic-club?tu=gliebig and we tried optimising it for printing. Some page elements may have been deliberately hidden.

Scan the QR code on the left to jump to the URL this document was printed from.