Quoted from meSz:Looking for LED ideas for the backglass! Found a few post on Pinside but they were older so looking for input on what the best LEDs to use for the backglass! Also, if you can advise as to the colors used! Pictures would be great as well!
Here is mine (it's a mixed mutt bag of LEDs!)
Cointaker warm white for all whites
Cointaker 4 + 1 for the Reds (3). for the white at the top (1), for the blue at top left (1) and for the yellow left center (1)
Comet 4 SMDs for oranges in center (3 of them)
Row of orange 1 SMD along top (except for 1 white, see diagram)
Flex blue in lower right corner, bent to point toward upper left corner
Flex blue left center, bent to point toward upper left corner
Comet Green 4 SMD in lower left
Cointaker purple in lower right but thinking of changing to blue 2 SMD for added blue on female magician
Note that the 4 SMD Comets are much brighter that the 4 +1 Cointakers - not good or bad just important to note as you apply them
20161004_214727 (resized).jpg20161008_102449 (resized).jpg20161008_103619 (resized).jpg