Quoted from Pin_Fandango:If you guys are going to buff, I have seen HEP use a rotary polisher with no issues but that is because he has lots of experience doing it.
I would instead use a D/A with forced rotation, like a flex or anything with force rotation. Much safer, you will never go through the clear and will most likely take 10 times longer overheat.
I have solid experience polishing paint and forced rotation also leaves a much nicer finish, just takes a hair longer than a rotary.
I've used a 6 inch random orbit
polisher from wen. I'm always worried I'm gonna burn through on final polish.
I actually think I started to on my meteor I just finished.
What should I be wary of not to burn through.
Or should I just freaking hand polish.
I just recleared my flash and will be sanding and then polishing.
Thx