I hope I didn't miss this someplace, but has anyone compared the 2K Glamour Clear to the 2K Rapid Clear?

In the spec sheet it says the 2K Rapid Clear will dry in 1.5 hours (and if using a heat lamp can be sanded after 10 minutes) where as the 2K Glamour takes 12 hours. It also says that 2K Rapid Clear is Urethane-based so, I don't know if that means it would tend to yellow over time (still a novice with this stuff)?

Anyway, just curious if anyone has messed with both of them for a comparison..

Cheers!

Appreciate the info. That is a nice little nugget that I can tuck away in my brain!

Depends on how bad and how much effort you want to spend. As others have mentioned, if the amount of missing material is small you an probably get away with an eye dropper. If not, you'll probably want to use some sort of filler. You an check the restoration threads for different ways, but here is a link to a HEP restore that he did some filling:

https://pinside.com/pinball/forum/topic/hep-is-hired-to-protect-the-black-knight/page/2