just finished my second can of spraymax and noticed i have some small dimples in the playfield, these are about the size of a grain of sand or even smaller. didnt have these after the first can. you really have to get horizontal to see them. Are these worth worrying about. I was only going to do two cans, but i have 2 extra, so i can do another coat if everyone agrees i should. If so, how should i fixe them? you can kind of see them in the reflective area of the picture. They are not all over, i would say there is about 30 of them total on the playfield

20190405_160441 (resized).jpg

anyone?

yes, i did wetsand with 1500 then cleaned with naptha and then a microfiber cloth, but i didnt tack cloth it, which is what i think i may have done wrong. i was planning on wetsanding again with 1500, 2000, 3000, then doing mcguires buff.

you can buy it in a matt finish
https://www.amazon.com/USC-Spraymax-Matte-Clearcoat-3680065/dp/B0178ABUVM/ref=sr_1_1_sspa

usually 2 cans, as at 3 cans you can start to get dimples where the ball hits it (or so others say) i just did my star wars with 2 cans. If i had to do it over i think i would have done at least 2.5 cans