I'm in the club but need some help. Can someone pm me. I would appreciate it. I can go thru details there.
You're currently viewing posts by Pinsider skyemont.
Click here to go back to viewing the entire thread.
I'm in the club but need some help. Can someone pm me. I would appreciate it. I can go thru details there.
Ok question. My upper playfield is not working. The arm that goes back and forth does not work.
I replaced the motor
I replaced the motor board
opto's work
wiring looks ok
no blown fuses
Now what? ?
Quoted from tachi:As someone with almost zero experience working on pinball machines (The Shadow is my first and only one) how do i check the optos for the mini playfield kicker. I looked at them unscrewed and the solder is good. When the playfield does the test it moves the kicker to the left and doesn't stop till it grinds out for about 2 seconds first. I took some pics and it looks like the gear is a metal one and in good shape so probably replaced.20151101_115733.jpg 20151101_115905.jpg 20151101_115917.jpg 20151101_115950.jpg 20151101_120115.jpg 20151101_120349.jpg 20151101_120545.jpg
This last picture of the connection is from the mini playfield and i'm guessing its in the correct location I didn't take a picture beforehand to verify where it goes. (i stripped the whole playfield and i'm still fixing the last few issues now as i put it all back together
I see your issue. PM me your cell. To much to type.
Quoted from jwo825:If that sticker is covering wear on the Sanctum, you might as well repair it while the playfield is stripped.
Good point.
You're currently viewing posts by Pinsider skyemont.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/the-shadow-club?tu=skyemont and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.