PinballOrphanage link for these?
All my harnesses are missing and the present rigs are kind of a mess. Still using incandescent and they are soldered directly to wire and tend to go out from vibration.
Do these need a resistor?
Thanks!
You're currently viewing posts by Pinsider gorillabiscuits.
Click here to go back to viewing the entire thread.
PinballOrphanage link for these?
All my harnesses are missing and the present rigs are kind of a mess. Still using incandescent and they are soldered directly to wire and tend to go out from vibration.
Do these need a resistor?
Thanks!
Quoted from Wmsfan-GAP:One example stateside. Lots of choices online....
ebay.com link » 1 8mm 2mm 3mm 5mm 8mm 10mm Pre Wired Led Dc9 12v Lights Emitting Diodes
Oh that's great. OK I see that these are standard bulbs and not LEDs so no need for resistor. Can't beat the price, ordering thank you!
Quoted from Mad_Dog_Coin_Op:Just for the record. These LEDs Wmsfan offered up already have the resistor added. It makes them a great choice. They are almost plug and play.
Appreciate that, that's a bonus as I thought they were incandescent. Sounds like I can just slap a couple pins on the end and connect to the existing molex, nice.
Howdy.
So all my ring lights are missing the sockets/harness and have standard incandescent bulbs soldered to wires.
Two are burnt out and it's driving me nuts.
I ordered some 3mm LEDs with resistors to replace and they are so dim it's crazy. They may as well not even be there.
Does anybody know where I can purchase the correct socket/harness for standard bulbs (everywhere I look is OOS) so I can just buy a bunch of bulbs and easily swap them without breaking out my soldering iron?
Or more ideally, does anybody know a suitable LED replacement that is as bright as standard bulbs?
Cheers.
BrewNinja Well dang yup you are correct I thought 12v was the way to go thanks!
Would these guys look to be a decent fit?
Cheers!
You're currently viewing posts by Pinsider gorillabiscuits.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/the-shadow-club?tu=gorillabiscuits and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.