Recently bought this title and just started having a problem with the wire form to the upper playfield. I’ve had a couple of air balls where the ball seems to clip the corner of the yellow stand up target where the wire form dumps the ball onto the playfield. I didn’t really notice how the wire form was positioned until this started happening. There is a slight amount of overlap between the top of the wire form and a corner of one of the stand up targets. Wondering if that bit of overlap is normal?? The wire form is solid, not cracked anywhere and doesn’t appear to be bent at all. Thanks

That’s what I was thinking too. I know the previous owner had done some work on the UP, I’ll check that first.

Thanks guys

Ok, definitely not seated all the way. Take a look at difference in backboard. Problem is I don’t see anywhere that I can make an adjustment. In the second photo it shows where the base of the kicker assembly is bottoming out on the plexi guard piece on the playfield.

Any ideas?

Thanks

5DC9E084-D300-411A-AC4D-A57871327F79 (resized).jpeg

E1C2F7D6-41ED-4662-90C1-9C59A64306D4 (resized).jpeg

I’ve had it up and back down. The problem is the base of kicker assembly is bottoming out. It can’t lay down any further. The thumb screw is perfectly aligned and goes in easily.

Maybe this thing was completely taken apart and not put back together correctly.

IDK??

Thanks. Good to know yours is offset too. I added a couple washers under the front attachment point at base of wire form. That tilted it nicely and it’s now clear of the standup target. Appreciate the help.