(Topic ID: 46571)

The Shadow Club


By marsgnu

6 years ago



Topic Stats

  • 6,539 posts
  • 552 Pinsiders participating
  • Latest reply 7 minutes ago by VALIS666
  • Topic is favorited by 184 Pinsiders

You

Linked Games

Topic Gallery

There have been 1,728 images uploaded to this topic. (View topic image gallery).

20191215_145917 (resized).jpg
20191215_145938 (resized).jpg
shadow_new_design_ramp_guard (resized).jpg
shadow_modified_ramp_guard-lh (resized).jpg
shadow_original_ramp_guard (resized).jpg
shadp2 (resized).jpg
shadp1 (resized).jpg
shadp (resized).jpg
20191208_194048 (resized).jpg
20191207_222439 (resized).jpg
armature-staked (resized).jpg
armature-loose (resized).jpg
terminal-crimp (resized).jpg
9585A586-ABF3-40DF-9C45-D87EECF62F76.jpeg
20191207_171446 (resized).jpg
shadow (resized).png

Topic index (key posts)

2 key posts have been marked in this topic

Post #4322 Alternate Shadow Translite and Speaker Panel Posted by Aurich (2 years ago)

Post #4328 Shadow Manual Rubber Ring Chart link Posted by vireland (2 years ago)


Topic indices are generated from key posts and maintained by Pinside Editors. For more information, or to become an editor yourself read this post!

You're currently viewing posts by Pinsider benetnath.
Click here to go back to viewing the entire thread.

#5576 8 months ago

joining the club
a good deal on a DIRTY Shadow.
a good cleaning step and tweaking, but everything works.
what are the current option to repair the burnt sanctum area ? overlay from pinball.center had a lot if negative feedbacks..
first balls were enjoyable , a lot to do !

#5578 8 months ago

thanks (Merci )

#5580 8 months ago

Thanks a lot, i'll dig that

1 month later
#5662 7 months ago
Quoted from Aurich:

I'm doing an alt translite package run if anyone is interested and isn't already on my list. Just shoot me a PM.
[quoted image]

I would be in but price stucks me for overseas shipment . Nice translite anyway

#5684 7 months ago
Quoted from Aurich:

Yeah, international shipping sucks. I actually lose money
shipping to a lot of countries compared to the extra I charge over
US shipping. Is what it is!

Would it be feasible to find a printer in Europe and process the order ? I can try to find a guy in my pinball group ?

#5691 7 months ago
Quoted from Aurich:

Nah, I want to personally see everything before it goes out. This is a really small boutique operation here, I'm just a guy trying to do some fun projects for a tight knit little community. I don't sell outside of Pinside, and it's important to me that everything looks right. I have a personal relationship with my printer, really enjoy working with him, and he's done a lot of work to make sure what we do lights up beautifully, because he's a pinball guy and gets it.
Anyone who's ever had any kind of problem with anything I've done knows that I stand behind my product and want everyone to be happy. If there's a minor issue it's still an issue, I'll always do whatever I can to make it right. Someone else printing in a country I'm not in and not seeing what's going out? Not something I'd want.
I'm not complaining about the shipping stuff, I've been doing this for years now, never raised the price. It can cost me $65 to ship to some countries though. So just being honest when I say that the international shipping price is the best I can do, and if it's too much I hear you, but it is what it is. It's frankly easier and better for me to ship to people in the United States. No customs forms, no smaller profit margin, no stress about overseas travel damaging boxes or nonsense.
Tell you my favorite one: Shipped a package to a customer in Austria. It's taking forever, where is the damn package? We check the tracking. Post office sent it to Australia.
Amazingly enough, they figured it out, shipped it back to the US, and then it was routed to Austria. Arrived undamaged, just took like 6 weeks. Customer told me it's actually not uncommon, and that they recommend anyone who ships to Austria write "Europe" after it.

thanks a lot for your post. That was really an open idea, and I totally get your point.
I'll think about that, once the Shadow is tuned.
Thanks and keep this line, that's exactly what I like in pinball community ^^

#5734 6 months ago

Is it homemade ? My right ramp is more a ball orbiter than a ramp. If I really align my shot with the left flipper, ball fly away downtown in the back of the playfield. That might fix this issue.

#5740 6 months ago
Quoted from ramegoom:

Are you talking about this one?
[quoted image][quoted image]

yes sir !

1 week later
#5773 6 months ago

Hi, I would like to share with you our current fundraising to purchase brand new pinball machines for our local Children's Hospital, they would replace the actual machines I've placed with my wife.
Share the love and don't hesitate to PM me for details :

https://www.ulule.com/des-lumieres-dans-les-yeux/
all details : https://www.deslumieresdanslesyeux.fr/en

#5775 6 months ago

Thanks for this comment.
I totally accept all english corrections. and I'll do that asap

1 week later
#5792 6 months ago

Same for me. A good shot on right orbit makes a sdtm .
What's the normal behavior ? Left or right flipper ?

1 week later
#5843 6 months ago

Hi,
I'm facing an issue with the mini-target that gives access to the mini-playfield.
If i push it by hand, it stays up ; but in test or during game, it never manages to raise up enough to be stuck in high position.

Can someone share some pictures on the shaft + coil + switch to try to set it right ??
thanks

#5853 5 months ago
Quoted from BENETNATH:

Hi,
I'm facing an issue with the mini-target that gives access to the mini-playfield.
If i push it by hand, it stays up ; but in test or during game, it never manages to raise up enough to be stuck in high position.
Can someone share some pictures on the shaft + coil + switch to try to set it right ??
thanks

someone, please ?

Promoted items from the Pinside Marketplace
$ 399.95
Lighting - Led
Pin Stadium Pinball LEDs
$ 279.95
Lighting - Led
Pin Stadium Pinball LEDs
$ 35.00
Cabinet - Other
Arcade Upkeep
$ 11.00
Electronics
Yorktown Parts and Equip
$ 50.00

You're currently viewing posts by Pinsider benetnath.
Click here to go back to viewing the entire thread.

Hey there! Got a moment?

Great to see you're enjoying Pinside! Did you know Pinside is able to run thanks to donations from our visitors? Please donate to Pinside, support the site and get anext to your username to show for it! Donate to Pinside