Quoted from PhillyArcade:

Just an update on my flipper issue. Seems the wires were getting in the way on the mini playfield when going left and causing it to studder. That over time was blowing the left flipper fuse as it's on the same line due to the drag on it. I took the mini playfield off and and moved all the wires so nothing was touching anything. Did a little lube on the kick back shaft for the flipper and installed my new plastic on the front. Colors are a bit off on the aftermarket plastic but it looks better than the broken one. Made sure everything was on just right and adjusted.
Was weird in test mode it worked fine but in game play it would bind up a little going left. Last owner broke just about everything. I got this thing cheap but the guy who owned it before me was a home owner with a bunch of pins who was like a back yard mechanic and not a pinball guy at all. I'm surprised there isn't drywall screws around the PF. Every nut and screw was different from the next on this thing. So glad I bought tons of hardware for the pins that came in handy getting all the screws and nuts back to how they should be from the factory. So it's all worked out played a ton of games on it with no issues.
[quoted image][quoted image][quoted image]