if the same as IJ we sell the gun handle hardware kit
You're currently viewing posts by Pinsider Ballypinball.
Click here to go back to viewing the entire thread.
Quoted from nams:Battlefield Mini Kicker constantly firing.
Thought I'd post this issue here with the fix if somebody in the future has the same problem.
A couple months ago the problem started with the battlefield mini kicker firing a couple times when the optos detected the ball. The issue got worse, and the paddle would constantly fire once the battlefield was activated.
After checking the optos and spending some time going over all the components on the battlefield I narrowed it down to the Opto SW-24 PCB Assembly (A-15646-2). Specifically, the L1 Inductor 10mH (5551-10890-00). That Inductor/Choke had gone bad and once replaced has been working fine since.
Those inductor/chokes aren't stocked by many suppliers here in Australia so if anybody has the same issue shoot me a PM and I'll send you one as I had to order a pack of 10.
Quoted from PachoHerrera:If anybody is repairing their Battlefield pinion gear and needs to source a new set screw, since the repair kit is out of stock and the replacement screw from pinballspareparts in Australia is super expensive when you factor in shipping, this screw can be purchased and lightly filed to fit in the pinion gear:
https://www.boltdepot.com/Set_screws_Allen_Half_dog_point_Alloy_steel_black_oxide_finish_6-32.aspx?Selected=25062
https://shop.mrpinball.com.au/product/pinion-repair-kit-the-shadow/
You're currently viewing posts by Pinsider Ballypinball.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/the-shadow-club?tu=Ballypinball and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.