Hey gang. This is my first post! Longtime Rush fan (long time pinball fan). just ordered a premium. This is a fabulous place to get tips and info on games!!!
You're currently viewing posts by Pinsider fussa71.
Click here to go back to viewing the entire thread.
Hey gang. This is my first post! Longtime Rush fan (long time pinball fan). just ordered a premium. This is a fabulous place to get tips and info on games!!!
Quoted from Reality_Studio:Just got mine from good 'ol AYCE Gogi in West Hills, plays really well, I'm happy
[quoted image]
Looks GREAT!
Quoted from kool1:Lucky.. Still haven't found one
Played this instead this evening.. [quoted image]
Deadpool is a great game!
Quoted from J-drum11:Anyone actually play a Rush machine yet?
If so how is it ?
I was lucky to get on LE list and I’m a huge rush fan but want to make sure it’s a good playing machine
I got about an hour on a pro
Had a blast! Obviously as a Rush fan I’m biased. It was loud, so I couldn’t really hear the music or call outs, but it was a fast player with lots of great shots
I orderd a premium the next day!
Quoted from NashtyFunk:Dumb question, y'all don't all unbox pins by yourselves?
Heck, it takes quite a few people to help drink all the beer
Quoted from Deez:What's the best Rush LP? I'm jamming out to these tunes and want to grab some vinyl to get into the deep cuts
Boy, that's a tuff one!
The early vinyl, would be great to have.
Farewell to Kings, Hemispheres and Permanent waves are all great
And there's some really good songs on side B of 2112 that rarely get radio play, Like Lessons
Its "all" good stuff!
I absolutely love Counterparts (my favorite) but I think most people will point to older stuff (2112, Moving Pictures etc).
Counterparts is AWESOME
I saw them front row In blooming Illinois for that tour!!
I’m having two small issues.
1. My right pop bumper keeps getting stuck in the down positionI did have an issue with a game that the stem of the bumper skirt was "popping" off the "spoon" under the play field, I had to adjust so it wouldnt "slip" off. but the coild was not locked on.
Quoted from bouche03:I opened it up. The driver was super apologetic and was the one that suggested opening it. Upon inspection the head was fine. The glass was fine too. But the bottom edges of the cabinet had been hit and split/mushroomed. I should have taken pics, but had already closed the box up. The box says enough though!
unbelievable!!
Is it getting shipped back, at their cost?
Quoted from kool1:Rush mat has arrived finally! Not bad for $35.
[quoted image]
That’s awesome
Where’d you get that??
Quoted from kool1:Rush mat has arrived finally! Not bad for $35.
[quoted image]
I’ve got one for Deadpool
I’d love one for the Rush, I have ordered
Quoted from jid:Where are you guys ordering the floor mats from? Those are cool!
The Deadpool mat came from Amazon.
It’s not exactly “cushiony” but it looks cool
Quoted from kool1:Nice idea. I have the Rush Funko Pop characters but not as cool.
Those Funko pops are pretty cool too
And HARD TO GET!!
Quoted from kool1:What kind of wax do you use?
Most carnauba waxes are good
P21 is really good
Quoted from indypinhead:I've always used this stuff...
https://www.pinballlife.com/blitz-carnauba-paste-wax-12-ounce-jar.html
Thank you.
I’ll try it
Quoted from gandamack:Which revision, 2 or 3, is the blue thing(s)?
revision 3 is the blue “things”, I believe.
Quoted from gandamack:I put in an order for a Rush Premium on the first of March. In the delays thread somebody said that Stern in making more Rush machines in June. What are my odds of getting the game this summer? I would post this in the delays thread but that thread has drifted off subject and thought this one is more appropriate now.
I put the deposit down for a premium in January
And still have heard nothing
Quoted from jonboy71:Where can I order a banner from?
“My” distributer couldn’t seem to get me one either.
I got mine from Flip n Out.
If Zack is out of them just check around with other dist.’s I’m sure someone will have one for you
They’re REALLY cool!
Quoted from wtatumjr:Anybody heard from Cointaker on their Rush order?
I did speak to Melissa. She said that there is a July build. I'm assuming they'll be getting an allotment from those.
Quoted from VisitorQ:Yeah I saw they are not included, why is that?
I don't think they have enough ratings yet for the Premium to qualify.
I also wonder if early scoop issues and early code effected the ratings?
Completely unrelated to any other topic.
I have to point out that with everything going on in the world “political unrest.. etc” it is so awesome to have a place like this, where everyone is just talking about Pinball!
You guys are GREAT!
When you’re a kid, and get a new bike (or shiny new Christmas gift) you can ride around the neighborhood shouting to all your friends, exalting your excitement!
As an adult, we don’t have that luxury.
Unless your on Pinside of course!!!
“MY NEW RUSH HAS JUST SHIPPED!”
Yay!!!
Quoted from VisitorQ:Any of you guys installing the Ninja Camp Rush VUK Protector
I am going to (my game is still being shipped) but a lil “extra protection” can’t hurt!
I’m not sure if this issue has been addressed here, but on a fast shot up the Rush ramp (when diverting to the left) the ball is flying of the left ramp and onto the playfield. Could be a leveling issue.
Anyone else deal with this?
Anyone have an issue downloading the new code using insider?
It seems to be downloading, but when I go check on it, it’s like it never started
I don't know if its a code "glitch" but has anyone else had this issue: when hitting the "RUSH" ramp and collecting the "1" (for the 1-2-3 combo) then hitting the right orbit for the "2" the game spots me the "3" (never even lights one).
Has anyone else had an issue with downloading code updates?
My machine goes through (what seems like) the entire down load, then when done…
It looks like it never even started!
Quoted from Bill2112Rush:Anybody else having this issue with the left ramp?
.
Have you tightened up the screws holding down the ramp?
Quoted from Slogan1111:Just joined the club with a premium. Rush. My favorite band. So a no brainer here! Can't wait to put pinwoofers in.
So. When I hit the right Rush ramp. It's going so fast that when it comes around the middle ramp. It just flies off onto the pf. Anyone else experience this?
I had that issue on mine, big-time. I loosened up the nut, holding the wire-form ramp, gently twisted the ramp and re tightened the nut. hasn't happened since.
Quoted from hiker2099:I’m sure this is answered like 1 million places on pinside. But if anyone has the time and wants to answer it, I would appreciate it. When someone says they have shopped a game, what do they generally mean?
Hay farmer is correct. It’s sort of a “vague” term for cleaning up a machine. Could include new bulbs or a touch up of a chipped playfield etc.
I just received a "replacement motor" from the dist. for my premium. I have yet to have a blown node board. (1186 plays so far) Is there a consensuses on replacing the motor? I hate to fix something that isn't "broke".
Quoted from Wicked-Flip:New game start. Targets down.
Is this correct?
Right now they are down and nothing I hit on the PF pops them up. The game appears to think they ARE up.
Have you done a "switch" test as well as "coil" test? your coil could be working fine, but one of your optos may not be working correctly.
Quoted from Taygeta:I’m having an issue with my premium where the upper GI and inserts reboot themselves rather frequently. The lower lights and game itself functions normally, the updated motor for the ramp has been installed.
If you've double checked the node connections for the upper play field (and look close...I had a broken wire on one that I didnt see at first.) Look for shorts in the light sockets
Quoted from Damagio:I think my only issue so far is the right orbit. I would say 50% of the time the ball gets hung up on the area where the upper flipper orbit shot exits into the right orbit…if that makes sense.
I think that's just one of those shots you have to "dial in."
Quoted from ddebuss:Any clue where it came from?
I got the translight from Flipnout.
I believe she ordered the frame directly from Stern.
Now I need the L.E. one!
Didn’t receive an email about shipping, yet the E. L. Kit arrived yesterday!
Although I still feel for those of you still waiting, I am excited to get these babies in there!!!
I’ve seen many photos of the expression lights installed
Pictures do not do these things justice
They absolutely change this pin!
Quoted from wesman:Thinking about a Premium or a Pro
It may depend on how big of a RUSH fan you are. I've played the Pro (and own a Premium) If I didn't love the band so much, I would be happy with the Pro. I don't think it compromises game play too much.
But...Its RUSH!
I had to have the Premium!
Quoted from DwightEisenhower:Apologies if this has been asked and answered but I was unable to locate an answer when searching pinside.
When I shoot a high velocity shot up the right ramp it will get eject itself off the wireform at the location indicated on the picture below and careen off the playfield rather than continue down to my left flipper. I have attempted bending the wireform so that it banks a little harder and prevents that forward trajectory but have been unsuccessful.
Any advice or mods to fix?
Thanks
[quoted image]
I had this issue when the game was new. I loosened the nuts holding the ramp and twisted the ramp (gently) as I re tightened the nuts. I have only had that problem 1 time since then.
Anyone heard from Ninjacamp recently?
I ordered another scoop protector and haven't heard a peep in several weeks.
You're currently viewing posts by Pinsider fussa71.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/the-official-rush-owners-club-1?tu=fussa71 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.