Is there another update in the pipeline at jjp?
(Topic ID: 278791)
Linked Games
Guns N' Roses (CE)
Jersey Jack, 2020-
Guns N' Roses (LE)
Jersey Jack, 2020
-
Guns N' Roses (SE)
Jersey Jack, 2020
Topic Gallery
You're currently viewing posts by Pinsider skwal.
Click here to go back to viewing the entire thread.
2 weeks later
Hi guys, I was fixing some stuff in my gnr and not it seems I cannot reconnect the bass ramp properly, can someone please explain how it click with the left ramp, I attached photos.
Would appreciate some photos of someone can
Thanks a lot
357ED6F6-4E48-41EC-9369-CFFCC87AE242 (resized).jpeg8398148C-B528-488D-A522-5C1AFD5F692B (resized).jpegB445C602-5969-4313-8272-FA8E2A70FD1C (resized).jpeg
Quoted from PinsNJeeps:Iām not sure what you have going on, but hopefully these pics will help.
Is the wire ramp inserted correctly at the top?
[quoted image][quoted image][quoted image][quoted image][quoted image]
Thanks a lot, know I ve fixed the ramp
Yes I need a post but I bought it second hand and the post was missing, do you know where I can buy one?
1 month later
Hi guys,
I got a gnr le, i ve noticed on my left flipper, when the ball transition from the guide to the flipper it always do a small bump and it gets difficult to shoot onthe fly because of this.
This does not happen on the right flipper and the ball transition from guide to flipper is really smooth.
Is there a way to adjust this?
I ve put new rubbers on both flippers but it makes no difference at all
Thanks guys
I just noticed my left flipper seems to have slighly more angle than the right one.
Can we adjust the angle? did anyone done it here?
Quoted from Ecw0930:Usually the left flipper has been pointed up a bit to help with a backhand of the left ramp.
You can adjust them from underneath the playfield. I actually just had to do this (for my first time ever) as I think my left flipper is slowly dying.
It's not an easy thing to get to. And it's not an easy thing to line up. But be patient, grab a beer, and if you have any mechanical skill (can you use a ratchet?) Then you should be able to line it up.
Using a straight edge on the lane guide is a big help also. You'll want to loosen it just enough so you can move the flipper without it moving all over after you let go.
How do you adjust the flipper angle? i see 3 screews from under the playfield holding the flipper in position. could you show me what to adjust?
Quoted from usafstars:Sorry for the elementary drawing:[quoted image]
Thanks mate that s exactly what i needed 
1 month later
1 month later
Hi guys, got an issue on my gnr le, the sound volume control (on the coin door) only work upward, i the down press does not register.
Any idea how i could fix this?
Thanks
Quoted from LTG:I'd start by reseating the connector near the door and in the back box. Be sure they are in tight.
Do you know where it connect to in the black box?
Thanks
Quoted from LTG:Download the manual. Might have the pinouts for the boards. If not download the Willy Wonka manual, boards and pinouts in the rear. Should be good enough for GNR.
If anyone have a picture of where it connect to in the blackbox would be very helpfull
2 weeks later
Quoted from CoolCatPinball:Hellz to tha NO my good man. Waste of time and money. Keep your playfield waxed, rubbers clean, and your balls fresh ( bad joke intended ) and you'll be just fine. Maybe a few petg washers under some posts here and there is all that's needed.
As the guys mentioned, if you have one of the latest run, you already have the washer and you don't have to worry about a thing.
If you're like myself with an early run, just buy some clear washer and install them.
Then as every machine, give it a wax regularly when you start nothing ball trail and you should be fine
2 months later
Quoted from LTG:b31 update available on WiFi not on the website.
LTG : )
I cannot see b31 on my wifi update, even after turning beta code on?
Promoted items from Pinside Marketplace and Pinside Shops!
Plantsville, CT
You're currently viewing posts by Pinsider skwal.
Click here to go back to viewing the entire thread.
Reply
Wanna join the discussion? Please sign in to reply to this topic.
Hey there! Welcome to Pinside!
Donate to PinsideGreat to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
