You're currently viewing posts by Pinsider rvdv.
Click here to go back to viewing the entire thread.
Quoted from rvdv:Also , is there something missing here ?
[quoted image]
Yo guys
Can anyone check their LE and see if Iām really missing something here ?
Just play the damn thing
Who cares about few bruises
Thatās all part of the experience
If you want to keep it new just donāt play it
LOL
Merry Xmas playing pinball all day
Rock on !!
Quoted from kcZ:Keyboard in front of the scoop has three inserts. Go into the menu and recalibrate them, I had to do this on my new game... I had the opposite problem with nothing scoring including the skill shot and the guitar locks.
Thanks for the feedback
Played the game almost for 5 hrs today
Gotta say this is my favorite now
The ball flow is great
Sound is awesome even on high
But the light show ...... freaking insane !!!!
Each song has its own version
Rocket Queen is my favorite thus far
Very , very impressed With this game
Just few ball hang ups by pop bumpers
And one second screen glitch in paradise city
Canāt wait for some fine tuning in code
More sound upgrades
Put external sub on it that just add bit extra kick
Just need something for the high tones on top
This game is fantastic
Just played the Propaganda mode
Not sure how I got it
Very cool , ā letās play a game ā
Quoted from Eskaybee:Game of the century if you ask me
This game has the best light show and sound
Iāve ever played before
And Iāve played many
Who knew Slash had such developing skills
Game has been running overtime and no issues
To mention
Got my sub hooked up in the power outlet inside the cab , run the wires via the screened holes in the bottom, nice and clean
Got my soundbar coming tomorrow for on top
Need more Powerrrr !!!!
Finally did update
From 1.19 to new code
Shaker motor makes game now rattle glass pretty bad
Any setting for this to tone it down ?
Quoted from thechakapakuni2:Ok, so here is how to install the JJP Fully Populated Updated I/O Board 15-004001-FP
I will post a separate review but in short this board is a āmust buyā
Youāll just need a Philips screwdriver and some patience
[quoted image]
[quoted image]
Here is the original board (right) and new board (left) side by side
[quoted image]
And a close up of the capacitors for the original board (right) and new board (left)
[quoted image]
First thing to do is open the back box and pull the LCD forward and youāll see the flipper board right behind it
[quoted image]
Take pictures of all the connectors before disconnecting them. These pics are clockwise starting on the left of the board, connector J702
[quoted image]
[quoted image]
[quoted image]
[quoted image]
[quoted image]
[quoted image]
Disconnect the connectors. Most came off pretty easy. The power connector was a little stubborn and had to wriggle it out.
Once the connectors are off, you have four screws (one on each corner) that need to be removed
[quoted image]
[quoted image]
Then slide the board left and out from the 6 standouts and set it aside
[quoted image]
Install the new board on the 6 standouts. Ensure all 6 standouts are hooked onto the board BEFORE putting on any screws. Have patience here, it may take a couple shots to get it in place. Then install the 4 screws. I put the left ones first to hold the board from moving, then the right screws
[quoted image]
Reconnect all the connectors
[quoted image]
Put the monitor back, close up the back box, and Fire it up!
You will not be disappointed. Itās a brand new GNR now, one like youāve never played before
Enjoy
- Chaka
why canāt we all get a board for free from JJP as a recall for faulty product ? Or at least swap with Core return for discount
In car industry you get free parts & install
Quoted from romulusx:How about a big block of government cheese?
Donāt like cheese
Downloaded latest game code
And played it , great improvement
Switched Game of and 30 min later
It wonāt come on
No lights , monitor , nothing at all
Any hints or anyone had this before after
Loading new code
Quoted from daley:Are the fuse lights on on the board? If you likely just need to manually trip the computer on.
I looked at the video
But my connectors not the same
Just need to know how to jump it I guess
Quoted from foxtj24:Short these 2 pins[quoted image]
Thanks for this info
Got mine working also again
Quoted from daley:Earlier in the thread someone had a similar issue. Check out this post and image for an alternate spot to jump the pins.
https://pinside.com/pinball/forum/topic/the-official-jjp-gnr-thread/page/554#post-8046604
Thank you much
Got GNR up and running after the Jump
You're currently viewing posts by Pinsider rvdv.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/the-official-jjp-gnr-thread?tu=rvdv and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.