Quoted from Chambo:I have this one attached to my IMDN. Highly recommended
Can this sub be attached and used with multiple pinnies at the same time? Can you offer or point me to some instructions on setting it up? Thanks!
You're currently viewing posts by Pinsider melumga.
Click here to go back to viewing the entire thread.
Quoted from Chambo:I have this one attached to my IMDN. Highly recommended
Can this sub be attached and used with multiple pinnies at the same time? Can you offer or point me to some instructions on setting it up? Thanks!
Quoted from allsportdvd:After a long wait it’s finally here!
Manufacturing date May 2021
[quoted image]
Congrats! Mine is in the same batch but still waiting on delivery. Hoping these lockdowns don't delay it further. ETA = next week. I'd be keen to know if yours has all the washers in place from the factory.
Hoping for some help from the brains trust. Just received my LE today. In my first game the sensors and spotlights weren't working. Reseated some of the cables to the PCD board and it all started working again. After a few awesome games, I decide to set up the wi-fi connection. After entering my wifi password the machine rebooted (crashed?) and now it is stuck in a reboot loop. The last thing it does is flash the "Last Game Scores" image and the 2nd image below shows the final messages before it reboots over and over. Sometimes, it will just hang on the "Last Game Scores" page with the game accepting no input from any buttons. Please help. Thanks.
Quoted from melumga:Hoping for some help from the brains trust. Just received my LE today. In my first game the sensors and spotlights weren't working. Reseated some of the cables to the PCD board and it all started working again. After a few awesome games, I decide to set up the wi-fi connection. After entering my wifi password the machine rebooted (crashed?) and now it is stuck in a reboot loop. The last thing it does is flash the "Last Game Scores" image and the 2nd image below shows the final messages before it reboots over and over. Sometimes, it will just hang on the "Last Game Scores" page with the game accepting no input from any buttons. Please help. Thanks.
[quoted image][quoted image]
Hope this might help others. I resolved my issue by removing the wifi transmitter (it's the little USB adapter labelled 'TP Link' attached to the USB extension cable near the coin box). This allowed the bootup process to complete. I then did a full upgrade from 1.21 to 1.23 from an ISO on a USB key (plugged into the same USB extension cable). I'm all back up and running.
All I want is the work day to end so I can get back to this crazy awesome game! I bloody love it!! Although, the default speakers are piss-poor. Definitely need to upgrade or add externals.
Quoted from Vespula:Was the boot order option#1 set to the USB?
I couldn't tell... Is Ubuntu the USB?
And am I correct USB stick supposed to go into the USB port that normally the wifi dongle is in?
Yeah, that's the one I used to do the full upgrade from 1.21 to 1.23. It's the USB extension cable close to the coin box.
Quoted from DrJoe:Has anyone done a full install with the new 1.23 code? I tried again to update from 1.08 to 1.23 from a PC this time (instead of MAC), new USB, started from the beginning again and still nothing. Could the full install on the JJP site be missing something or buggy?
I recently did the full upgrade off the iso from the JJP site and it worked fine (went from 1.21 to 1.23). Have you tried doing delta upgrades to slowly step-up to 1.23?
Bluetooth connection to Apple Airpod Pros is quite temperamental. Some nights it connects (after a couple of attempts), others not. What's the trick?
Quoted from PinMonk:What chip is on the bluetooth board with the headphone jack? If there's writing in it, we an figure out what bluetooth it supports. I doubt it supports bluetooth 5, so the airpods are slumming it with compatibility mode on early bluetooths.
CSR 4.0. Has anyone tried using a 5.0 bluetooth USB adapter?
Has anyone even come close to the final wizard mode? My top score is 152m and I haven't completed more than 2 modes in any single game.
Quoted from PinballGalore:I also noticed the other day that you can lose letters. How does that one work? Sometimes I’ll have 2, anticipating the third only to realize I’m down to two again. What gives?
It's because you're moving the letters around each of the 3 inlanes with each flipper press.
Quoted from screaminr:You can get mirror blades from , kjs pinball Brisbane , I got the black ones .
https://m.facebook.com/KJSpinball/
Got a photo of the blades in the machine?
You're currently viewing posts by Pinsider melumga.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/the-official-jjp-gnr-thread?tu=melumga and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.