Alexandria, VA
Maybe I missed it, but it would be great if someone created a new G-N-R gun/shooter rod assembly. Now that I would buy over the skull version!
(Topic ID: 278791)
Linked Games
Guns N' Roses (CE)
Jersey Jack, 2020-
Guns N' Roses (LE)
Jersey Jack, 2020
-
Guns N' Roses (SE)
Jersey Jack, 2020
Topic Gallery
You're currently viewing posts by Pinsider jefryan.
Click here to go back to viewing the entire thread.
3 weeks later
Well, I received LE #745 just over a week ago and have been busy playing non-stop!
Only issues thus far:
- A screw fell out of the upper playfield (top-most, left side) clear plastic mounted to two posts (took me over an hour before I finally found this bastard!)
- Last night I noticed my upper playfield and upper right flippers seem to only be working 70% of the time. Need to figure this out now. I've checked the wires that connect and they all seem securely soldered where they should be. All backbone connections are secure as well. Of course I checked just the ones that are plugged in... does someone have a picture of what the J601-1 connections look like in the backbox?
Quoted from PinMonk:Check your flipper switches opposite the buttons on each side inside the cabinet. The flipper switch is a stack where you have to enable the first leaf switch, then press through to enable contact with the second leaf switch to enable the second flipper on each side. It's likely that that second leaf just needs to be bend in toward the flipper button a little so it makes reliable contact every time.
You are the FKN MAN!!!! Thanks a ton brother. Cheers to you.
1 week later
Quoted from fooflighter:When I installed my Cliffy on the scoop, there is a little play in the hood as Chuck mentioned to adjust it. There are two hex screws holdingit in place. You should be able to stick a small hax driver or phillips head bewtween the guitar lock off ramps and loosen then retighten to offset / aim the scoop a little more to the left so it contacts the left flipper...I would guess there are a couple mm of play in the hood.
I successfully did this and I'm still 80% SDTM. Definitely frustrated. Any other recommendations?
Quoted from zaphX:Maybe an issue with coil power to the scoop? Is the plunger moving freely, aligned correctly within the coil sleeve etc?
So far as I can tell from inspection most definitely. I guess I'll fiddle with the coil power settings and see what happens.
Promoted items from Pinside Marketplace and Pinside Shops!
You're currently viewing posts by Pinsider jefryan.
Click here to go back to viewing the entire thread.
Reply
Wanna join the discussion? Please sign in to reply to this topic.
Hey there! Welcome to Pinside!
Donate to PinsideGreat to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
