Keller, TX
That's pretty. I like the goodies, but will be happy with the LE
(Topic ID: 278791)
Linked Games
Guns N' Roses (CE)
Jersey Jack, 2020-
Guns N' Roses (LE)
Jersey Jack, 2020
-
Guns N' Roses (SE)
Jersey Jack, 2020
Topic Gallery
You're currently viewing posts by Pinsider NashtyFunk.
Click here to go back to viewing the entire thread.
Quoted from Psw757:This Bluetooth speaker would be fantastic up top on the LE, they look fantastic too. forget about the $60 soundbars, they sound like dog shit.
[quoted image]
[quoted image]
I have a Marshall BT speaker. They sound incredible.
My concern would be on the stream last night they said the Bluetooth lag was something like 1/4 seconds. That could be an issue if using an external speaker.
Mine is scheduled for delivery tomorrow, so I guess I’ll test that.
Quoted from NeilMcRae:hey folks,
those of you who have got games how are the play fields?
Cheers,
Neil.
A little overwhelming at first, then pretty smooth and fun.
I only have a few games in it, just updated the code and going to spend more time on it tomorrow evening.
This game is straight up eating my lunch. I gotta get dialed in because I’m getting plenty drains in 10-15 seconds. The right side is particularly unforgiving.
For owners who have their games, where is your ball coming into play?
I’ve seen some streams where it’s smooth to the right flipper.
On mine it usually hits the rubber and bounces to the left flipper but sometimes just kisses it and goes strain down the middle.
It’s kind of a pain when new balls come into multiballs etc.
Am I too steep?
Bubble says I’m exactly 6.5 degrees.
To an early point, I also upped the flipper strength a bit. My hand hurt after my first sessions as I was trying to physically compensate for the lack of pop.
Knowing full well it did nothing.
Quoted from Yelobird:Leveling left to right is Critical on this game. If level it will always feed the right flipper. Also consider adding a bit more slope to the game. 6.5 works ok for a slow game not a JJP game. Mine is at 7.4 and plays great. Use a level not a bubble.
I have a digital level being delivered tomorrow for this game.
I’ve played with it a bit on “feel” but seems like it’s really sensitive to that.
Quoted from Yelobird:Yeah we had one at an open house that was out of level and it did the same thing. At least download the free PinGuy app and use that to level both directions. Simple and free.
I didn’t even know that was a thing, thank you.
I just got into the hobby in June so figuring out a lot of the basic tips a tricks.
Quoted from Yelobird:Just got into the hobby in June and already 10 games! The addiction is Strong for you sir. Lol. Yeah for me I exclusively use the PinGuy app. Works well, free, and easy to setup a game as it calls out the level while your crawling under the machine. Works for me.
Yeah...when I like something I go hard. I have a very patient wife who has signed off on most of the 10. She wasn’t thrilled about adding the GnR, but I’m going to sell a couple, make room for zeppelin assuming it’s out later this year and take a break for a while.
Oh, maybe after my Indian Jones is finished getting built. I know I mentioned that to her but she’s going to forget before it’s finished. 
1 month later
Got an issue on mine that maybe someone here can give me some pointers on how to fix:
My center scoop eject isnt going to the left flipper. It's barely enough over to the left to where I have to flip and basically hit it as it's flying down to keep it in play and then it's flying all over the place, usually very horizontal.
It's made it to where it's not fun to play anymore. I can't complete a song anymore because if I dont time it perfectly, anytime I try to add a ball, I'm going to lose the one I had SDTM.
Any advice would be appreciated.
Quoted from kermit24:Two / Three things you can do.
1. Loosen the hood above the scoop 2 X 1/4" drive nuts under the plastic. Point the hood as far to the left flipper as possible. Retighten.
2. Slightly bend the hood down. The ball will get less air and be more reliable.
3. Adjust eject power. I wouldn't recommend this before trying 1 and 2.
Thank you! I messed with the ejector power first and didnt really do anything for the trajectory. I'll try the other fixes.
Promoted items from Pinside Marketplace and Pinside Shops!
You're currently viewing posts by Pinsider NashtyFunk.
Click here to go back to viewing the entire thread.
Reply
Wanna join the discussion? Please sign in to reply to this topic.
Hey there! Welcome to Pinside!
Donate to PinsideGreat to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
