You're currently viewing posts by Pinsider Mancave.
Click here to go back to viewing the entire thread.
Quoted from LTG:I'd leave the bill validator harness alone.
The lights on the coin door are 12 volts. Tap into them for flipper button lights.
Or look online for a MEI 12 volt bill validator PDF manual, the pinout will be in there
Thanks mate, much appreciated
Quoted from zaphX:Center that tilt bob, yo
If i had this machine i most certainly would. Pic was borrowed from this thread
Quoted from punkin:I got some stuff for Deadpool from Comet, including lighted buttons and that's what they did Paul (buttons are for me in this instance for those following), tapped into a bulb on the coin door with a little led that had a double adaptor. jumper plug on there. Let me know if you need pics of the coin door on Gunners.
Yeah send me a pic or two please mate. I have some Comet 6.3 bulbs with adaptor like that but they wont suit 12V for Gunners and will fry
Those Comet ones are for 6.3V hence hooked up to the insert socket, mine for Stern machines normally use the plug to the right in your picture (bill validator) which has 12V (grey/red) and GND (black) The insert socket will suffice for Gunners though, just need a good squiz at it
You're currently viewing posts by Pinsider Mancave.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/the-official-jjp-gnr-thread?tu=Mancave and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.