Does the Band Members each get a CE edition ?
Just a curious thought that there are 500 of them minus the ones the band members get . Wonder how much Slash could sell his Personal one for / Dayum just the going to get it from him would be awesome
Does the Band Members each get a CE edition ?
Just a curious thought that there are 500 of them minus the ones the band members get . Wonder how much Slash could sell his Personal one for / Dayum just the going to get it from him would be awesome
Quoted from PinFever:Does the Band Members each get a CE edition ?
Just a curious thought that there are 500 of them minus the ones the band members get . Wonder how much Slash could sell his Personal one for / Dayum just the going to get it from him would be awesome
You could own this one!
Not sure if this is from the auction he had a year or so ago, and if it's being resold or didn't sell initially.
Screenshot_20201017-153911_eBay (resized).jpgQuoted from PinFever:Does the Band Members each get a CE edition ?
Just a curious thought that there are 500 of them minus the ones the band members get . Wonder how much Slash could sell his Personal one for / Dayum just the going to get it from him would be awesome
What I heard through the grapevine;
CE #’s reserved...
Eric M. 001
Slash 002
Axel 003
Duff 004
Well, if I had a choice I would have wanted CE #069. Always been my favorite number for some reason.
Quoted from insight75:Well, if I had a choice I would have wanted CE #069. Always been my favorite number for some reason.
If you were a hot chick I would care!
not into WOZ but wow,never seen an ad like that , Did Picard do such a Think , oh Mr Stewart Where are you
Quoted from wesman:You could own this one!
Not sure if this is from the auction he had a year or so ago, and if it's being resold or didn't sell initially.
ebay.com link[quoted image]
Ok the pinball room is not quite complete yet... but very close and I couldn’t wait any longer being that I picked up GNR on Tuesday! (I’ll finish up the pinball room another weekend, just trim, lighting and minor painting)
So I set up my games and brought GNR down with my 15 year old son today! Scuffed the walls (oh well) but I chipped a corner of the game..... Fuc#!!!
It’s fine, I guess, it’s under the leg so you can’t see it. But still... damn it!!!
Anyway, here’s a pic.
0894E93F-968D-45B2-B5FE-7ED0B35E0764 (resized).jpegQuoted from PinFever:not into WOZ but wow,never seen an ad like that , Did Picard do such a Think , oh Mr Stewart Where are you
Almost, kinda...worse! I think Gates McFadden sold hers, NIB sitting around for awhile, to @rarehero.
All of that stemmed from this...last year.
Have fun scrolling down!
https://news.artnet.com/market/slash-perla-hudson-auction-1509697
Quoted from wdbthree:37M+ jackpot lost on Paradise City last night. Knew I was pushing my luck, but was in the ZONE. (Until I wasn’t).
See now that needs to be documented in the game!
Quoted from Pinball-Obsessed:Can anyone offer any help with this? Before I moved my pinball machine earlier, I heard something rattling around inside. Once I got it in the basement and set up, I found these 2 screws.
I’m Not sure where they go.
Any help would be appreciated.[quoted image]
Coin door mechs, from what I've seen others say.
Quoted from Pinball-Obsessed:Can anyone offer any help with this? Before I moved my pinball machine earlier, I heard something rattling around inside. Once I got it in the basement and set up, I found these 2 screws.
I’m Not sure where they go.
Any help would be appreciated.[quoted image]
I think I had something similar to those rolling around in my WoZ when it was delivered. Back side of coin door?
Quoted from Pinball-Obsessed:Can anyone offer any help with this? Before I moved my pinball machine earlier, I heard something rattling around inside. Once I got it in the basement and set up, I found these 2 screws.
I’m Not sure where they go.
Any help would be appreciated.[quoted image]
They secure the coin mechs in place
Quoted from Bmanpin:I think I had something similar to those rolling around in my WoZ when it was delivered. Back side of coin door?
Yep!
Thanks dude!
Anyone else having trouble with guitar ball lock?
Mine recognizes the 1st 2 balls then not the third or fourth (or any after I think).
For now I just bypass it and open the coin door and force another ball into play.
Quoted from Pinball-Obsessed:Mine recognizes the 1st 2 balls then not the third or fourth (or any after I think).
Tests - Switches - Matrixed - 3rd and 4th switch working ?
Then check for loose wires, if optos - are they still in place ?
LTG : )
Quoted from Pinball-Obsessed:Anyone else having trouble with guitar ball lock?
Mine recognizes the 1st 2 balls then not the third or fourth (or any after I think).
For now I just bypass it and open the coin door and force another ball into play.
Reboot the game. Make sure you are on 1.06 (can download over WiFi) Put into switch test. Place a pinball over each sensor to verify they are working. Reboot the game. I believe the sensors auto calibrate upon each boot up.
These are the non mechanical sensors.
Quoted from kermit24:These are the non mechanical sensors.
Thank you. Not having the game yet, I didn't know that.
LTG : )
Quoted from LTG:Thank you. Not having the game yet, I didn't know that.
LTG : )
I figured. Happy to help until you get one in hand!
Quoted from kermit24:I figured. Happy to help until you get one in hand!
Don't know if or when that is happening.
I've got to stay out of the GNR threads. My help isn't much good, but I hate to have people wait for help if they don't have to.
LTG : )
Quoted from wesman:Coin door mechs, from what I've seen others say.
Ohhhh Hellz no!! Not more coin door issues!!! No one lose their shit!
Quoted from CoolCatPinball:Ohhhh Hellz no!! Not more coin door issues!!! No one lose their shit!
This is terrible... 2 loose screws!!!!
Maybe JJP will take this game back and refund my money?
Quoted from LTG:Tests - Switches - Matrixed - 3rd and 4th switch working ?
Then check for loose wires, if optos - are they still in place ?
LTG : )
Quoted from kermit24:Reboot the game. Make sure you are on 1.06 (can download over WiFi) Put into switch test. Place a pinball over each sensor to verify they are working. Reboot the game. I believe the sensors auto calibrate upon each boot up.
These are the non mechanical sensors.
Thanks guys!
I’ll check on this tomorrow and report back.
Much appreciated!
Quoted from Pinball-Obsessed:Ok the pinball room is not quite complete yet... but very close and I couldn’t wait any longer being that I picked up GNR on Tuesday! (I’ll finish up the pinball room another weekend, just trim, lighting and minor painting)
So I set up my games and brought GNR down with my 15 year old son today! Scuffed the walls (oh well) but I chipped a corner of the game..... Fuc#!!!
It’s fine, I guess, it’s under the leg so you can’t see it. But still... damn it!!!
Anyway, here’s a pic.[quoted image]
Your game room looks amazing! And you have great games there man! enjoy your GN’R! I have to wait 2-3 more months here in Canada for mine.
Cheers!
Quoted from KingPinGames:I can finally show off my christmas present. Now I just have to decide if it actually goes on my game or in the shelf next to the gsme.
"To Chirstopher, R & F'n R! Slash 2019"
[quoted image]
Awesome gift!! With little kids the safest place will be inside your game. Your bro knocked this game out of the park!
Quoted from KingPinGames:"To Chirstopher, R & F'n R! Slash 2019"
Looks like someone is into the Christmas eggnog already. Cheers and Merry Xmas!
Signed it last Year . that game and Instruction card has been in the making since 2019? Sweet child o mine . Great gift Man
Quoted from kermit24:Condoms too!
They really have captured the whole tour experience .
Quoted from Mr68:I paid a lot of money for those tickets and don't appreciate being called names.
Lol , I was thinking of another type of boob .
Quoted from kermit24:Reboot the game. Make sure you are on 1.06 (can download over WiFi) Put into switch test. Place a pinball over each sensor to verify they are working. Reboot the game. I believe the sensors auto calibrate upon each boot up.
These are the non mechanical sensors.
Latest software update corrected the issue.
Thanks!
Quoted from cooked71:My mate spent $20K on a mountain bike and the chain fell off first ride.
Did he buy a Supreme bike
Quoted from Bmanpin:Already there have a Yamaha haven’t had to fix anything. You are buying the wrong boat. Somebody educate me please I have 2 Sterns that I haven’t had to do anything with and my MMRLE has needed maintenance as well as my JJP WoZ. I am in on the LE for GNR. I don’t want to have to do anything and I assume I shouldn’t have to do anything it’s ridiculous for the amount of money.
you are right but sadly we often find in pinball that the QC isn't there, and you'll hear a load of fanboy claims on all manufacturers, all of them have poor QC with CGC being slightly ahead.
Quoted from screaminr:Did he buy a Supreme bike
All I know is the resale value sucks. He only buys second hand now and saves 50-75% off original price.
Quoted from allsportdvd:Isn’t the point of the hot rails to not need Pinstadium????
If ever a game was made that didn't need pinstadiums this is it .
Quoted from screaminr:If ever a game was made that didn't need pinstadiums this is it .
You haven’t heard of the newest PinStadium Black Hole TM? It’s a special magnetic cover that goes over the hot rails to reduce the lights by 50%. $299 with de-diffuser.
Quoted from phoenixpin:You haven’t heard of the newest PinStadium Black Hole TM? It’s a special magnetic cover that goes over the hot rails to reduce the lights by 50%. $299 with de-diffuser.
Lol , 299 bargain
Quoted from zr11990:We are all grown ass men and still want to see boobies.
Hey. did you you know that boobs without nipples would be pointless?
You seen one pair.... you want to see them all. -Rodney Carrington
Quoted from screaminr:If ever a game was made that didn't need pinstadiums this is it .
Agreed. This game does Not need additional lighting in any way. Anything more simply ruins the primary design.
Quoted from Yelobird:Agreed. This game does Not need additional lighting in any way. Anything more simply ruins the primary design.
Jeez, even Slash wears his shades man when playing.....it's so bright!
Quoted from Pinball-Obsessed:Anyone else having trouble with guitar ball lock?
Mine recognizes the 1st 2 balls then not the third or fourth (or any after I think).
For now I just bypass it and open the coin door and force another ball into play.
Quoted from Pinball-Obsessed:Latest software update corrected the issue.
Thanks!
Still have the issue.
Quoted from Pinball-Obsessed:Still have the issue.
So when you put it in switch test and place a pinball over each switch what do you get?
FYI - I was finally able to pair my BackBeat Pro Headphones with the game. Sounded great and the delay wasn’t terrible. Maybe they fixed some Bluetooth stuff with 1.06.
Quoted from BallPin:What are the dimensions of the box the machine comes in?
57” x 29 3/4”
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/the-official-jjp-gnr-thread/page/24 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.