nice work and cool layout with some interesting features.
You're currently viewing posts by Pinsider swinks.
Click here to go back to viewing the entire thread.
Quoted from MarkInc:Sorry, thought I had posted it....
https://www.facebook.com/markinc
nice work, nice tub movement.
also with the whirlpool thing is it levelled off to the ground or sitting at the playfield angle (guessing 6.5degrees) as level might make it rotate around a little more.
Quoted from MarkInc:The square cutout is parallel to the playfield, but the bowl is actually level to the ground. The bowl intersects the playfield at 6.5 degrees to counter the playfield slope.
no worries, your on to it
bummer about the scan,
alternatively I have done a pure measure and draw into CAD and then print (have a small rule printed in the print as a scale check) in tracing paper and then do a overlay check - a little time consuming but once you get in the swing of it measuring from the left side and bottom side for every item keeps it consistent. and then a photo like how toyotaboy suggested as a layer to toggle off / on.
You're currently viewing posts by Pinsider swinks.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/the-nightmare-before-christmas?tu=swinks and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.