Machine: Bride of Pinbot, The
Williams, 1991The head/face was working fine but has started to get wonky and out of sync at times. Somewhat common issue with the BOP and everyone says to reflow the solder on the relay... and that didn't help at all. Resetting the pin didn't have any effect as best I could tell.
I ended up with a bad switch, number 67. There seems to be very little info about this switch 67 so I made a short video showing the location, how it operates and the failure of mine.
Hope this helps some one out.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/the-machine-bop-another-face-issue-fixed and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Knoxville, TN