Quoted from MSLONEKER:i want to run this by you all. Gimili switch is not registering on the switch test. i checked the connections and discover there was no diode on the switch. I looked around just below the switch and found a broken off diode. I grabbed a fresh diode and soldered onto the switch and rechecked. Still the switch did not register. So i started to remove the switch to put a new one in. Holy crap!!! Has anyone replaced this switch. Im thinking i am going to have to take off the entire Upkick bracket to get the switch out of there. what a pain in the rear. Anyone??? Am i right or is there a trick to this.
Its funny you are doing this as I literally just did this last night. I unhooked the two main connections and then removed the 5 screws to remove the whole item to get access to the switch. It literally took 5 minutes and is well worth your time.