Morhaus

Check the spinner, it activates the maginet. I was getting inconsistent magnet activations so I adjusted the wire form. Check the spinner switch for continuity.

Also my switch in back needed to be adjusted to register DTR. checked by manually passing a ball through.

Make sure you have the current rom chip as well. I think there is a corrections to the magnet hold during DTR.

Mine didn’t register DTR for a long time, until I troubleshooted it. It is satisfying to see the light show when you do.

Good luck!

Morhaus
Radio Shack has a great selection of low aperage fuses. I had to get some for my Stargate. The auto part stores didn’t have anything in the right range in my area.

edit: spelling

auspin Download an app called pinguy. It is a specifically for leveling you pinball machines. You set the angle you want for that specific game. You can also calibrate it for each machine with the glass re installed. This way you don’t have to pull off your glass to re level if you move the machine around.