Tried last week,unless things have changed. APB didn't have an option on Pinside to ship to Canada...Hopefully this has or will change.
You're currently viewing posts by Pinsider Angel.
Click here to go back to viewing the entire thread.
Tried last week,unless things have changed. APB didn't have an option on Pinside to ship to Canada...Hopefully this has or will change.
Quoted from JMK:Angel: Do you know of any other retailers that carry the LOTR APB coils that would ship to Canada (if APB Enterprises won’t ship to Toronto)?
I'm in the same boat as you. I would love to get these coils to replace the ones I have in my LOTR. I will reach out to Player One to see if they can bring them in and what it would cost or if they already have them in stock...
I just installed the 4" Kicker speakers that are in your link on my LoTR and they sound absolutly great. A worthwhile upgrade over the Stern factory speakers.
I replaced the original transistor with an IRF 540N and I continue to use the 5A SB; all is good. Magnet works all the time now and no more blown fuses. It is F20
I had a similar issues several months back. During multiballs (fotr, ttt, rotk), balls would launch continously. I checked the trough switches and they were all good. My problem was the opto boards at the end of the trough, the red LED on the receiver (there are 2 small opto boards) was not lit. The problem wasn't the opto boards, rather it was the 2 pin connectors. I re-seated the connectors and it temporarily solved the problem. Vibration would cause the issue to re-appear. I put a thin coat of solder on the male pins to create a tighter connection and this has worked now for about 5 months. Probably will have to hard wire the connection to solve the issue permanently.
In my case the optos weren't bad (I originally thought they were). The two pin connector started to fail after time, I ran some solder on the male pins to make a better/thicker connection, it has worked for now. Eventually I will hard wire this connection and eliminate this connector altogether. The male/female connection wears down after time due to vibration in the area.
You're currently viewing posts by Pinsider Angel.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/the-lord-of-the-rings-journey-begins-members-club?tu=Angel and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.