Congrats!
You're currently viewing posts by Pinsider HarryReimer.
Click here to go back to viewing the entire thread.
Quoted from zaphX:I tried to hold out to protest the prices, but I'm only human.[quoted image]
Welcome back.
Quoted from Bmanpin:It is not. Meant to flex as ball passes by. My screw is not there.
Thank you
Quoted from dug:https://www.amazon.com/dp/B0BL5QT295
I did this and it seems to be perfect so far. Its rubber not foam.
Thanks goes to Nick.
Thanks to Nick... works great for me as well... I think its a must do on your machine.
The left ramp that goes up and down and locks the ball MAY cause damage over time to the playfield. Nick was seeing the beginning of the damage and recommended a rubber tape that would prevent the damage.. or at least slow the damage see picture.
A link to purchase the rubber strip is below:
https://www.amazon.com/dp/B0BL5QT295
Pinside_forum_7667180_3472766 (resized).jpgQuoted from crwjumper:So I spoke with my distributor today and she reached out to JJP who said that they drop-shipped my GFCE on 8/3. JJP gave her the shipper info and she then reached out to them. They sent her an email saying that they have been waiting for me to call them to arrange delivery. (WTF?). I called them and they said that they left me a voice mail on 8/8 (they didn’t). So it’s being delivered tomorrow. Mystery solved and she’ll be here tomorrow! Hopefully it didn’t get moved around a bunch in the warehouse while they were waiting for me to call. The fewer forklift experiences these thing have, the better.
Woo-hoo!
This happened to me when I was having GNR delivered (after a near year long wait).. My distributor told me it would be delivered any day... a few weeks went by and the shipper said they were trying to call... but good news it was being delivered this morning and NO ONE WAS HOME... they would have left it in the driveway...
Quoted from screaminr:Just awaiting on the truck now , the excitement is building
[quoted image]
One of my favorite games to play... enjoy it.
Quoted from Cayenne:Friends of the low ceiling, I have finally been able to hang up my topper. Fortunately, there's only one power cable and one extended USB cable. Additionally, it's now more visible as well. [quoted image]
Very creative!
Quoted from VisitorQ:Here is another Easter Egg in the CE that has been overlooked.
"Marquette St."
Chris and Melissa Marquette AKA "Cointaker"
Christopher Franchi is good friends with them and has also designed a lot of their signs, logos, shirts and more including their mascot.[quoted image]
Is Francis Ford Coppola spelled incorrectly?
Quoted from VisitorQ:Has anyone hooked up an external sub yet? I have one on my Hobbit and it makes a big difference, was wondering if it would do the same for GF?
Yep, amazing.
Quoted from KingBW:Check where your invisiglass etched emblem is. It should be legible correctly from the top. This would likely mean that it should be in the bottom right corner. My glass was upside down with the etched logo upside down in the upper right corner and the flag sticker right side up in the top left corner. This was incorrect per JJP. They told me to flip the glass over and either move or remove the flag sticker. It makes a difference.
[quoted image][quoted image]
I looked myself, 3 of my JJPs were correct 2 were incorrect.... Dont see a difference honestly.
Quoted from Kneissl:Man what's with the hate on godfather? I was scrolling through the ratings, not even 10's getting flagged, can't a guy like the game?
I Finally got hands on one for a few quick flips.. she's a beaut!
I couldnt agree more. Its a great shooter, its beautiful.. the price and theme puts people off.. because its one of JJP's best shooters in my opinion.
Godfather being one of my favorite movies helps of course...
If you cant justify the price pick up a used one, lets hope Keith finishes the code.
You're currently viewing posts by Pinsider HarryReimer.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/the-godfather-club-keep-it-in-the-family?tu=HarryReimer and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.