Quoted from Dantesmark:Just ordered a pinwoofer super kit for my premium, and i want to light up the speaker cones…. Do i need these plates or not? Im assuming no b/c the pinwoofer kit already has it since im upgrading to the 5.25 kit, but not positive…?
Thx
[quoted image]
Hey Dantesmark !
If you ordered a light kit that requires the 5.25in upgraded plates, then you'll need to order a set. Doug (from speakerlightkits.com can tell you), or else you can post what you ordered, and the community is helpful to clarify.
What we supply you is guaranteed to work for the factory speaker plates you have now, so you have nothing to worry about.
If the speaker light kit you ordered comes with new, illuminated mounts, then you discard the mounts we provided. If light kit does not require new mounts, you'll continue to use the mounts we supplied.
We're setup to work by default and while it may seem confusing now, it should be obvious when you get your light kit and have your PinWoofer kit in play.
A final consideration: if there is any delay in receiving your light kit, you'll be glad we do things like I described above because you can install your PinWoofer kit when you receive it. Also, always keep the mounts we supplied in case you de-install the light kit and / or upgraded plates in the future.
Here is some additional information from our blog:
https://pinwoofer.com/blog/pinwoofer-spike2-backbox-speaker-light-kit-compatability/
Hope that helps - give a shout if you need more assistance.
Thanks,
Dan
https://PinWoofer.com
[email protected]
+1 208-855-0346, 9am - 5pm MT, Mon - Fri
A_SSK (resized).jpg