Joined the club! I am an Aussie currently located in Canada for work. playfield is ok w the usual small wear patch on right lower bumper. Inserts need doing. Some planking. Plastics ok. Have upgraded power supply plus Trifurcon and headers as per clays/vids guides. Combo Rom cpu board mod also. Next is driver board and header/connectors to Trifurcon on cpu and driver boards.

Couple of interesting things I'd like to hear from people on.

No red/white grounding wire?

The backbox has a different serial number to the playfield and cabinet. one of a pair (or more) on a route and got mixed up when stored?

Special solenoid wire (purple) had an extra wire (black ground) for some reason. Yet to check coils, trying to get cpu/driver going. Any ideas why?

General illumination. Nothing there even though circuit has continuity right into playfield. Haven't tested the voltage but the PS board is ok. Any thoughts/tips?

I'd also like a CPR playfield. Any new leads would be great. Anybody w a good scan of that area?

Can't wait to play this, so much so that I've got a rottendog waiting if I get too impatient! Even if I install it, I've got to sort out the solenoids. One of them keeps blowing the fuse.

BTW, I did start a thread On my restore. Nothing outstanding, just a place to put a few pics, videos and stuff.

https://pinside.com/pinball/forum/topic/firepower-tech-repair-and-restore

Comments gladly welcome.

Hi all, a question on the left flipper ramp/lane. Anybody got any ideas as to the post part number at the top near the rear of the bumper? I am missing it and want to replace it?

Is it 02-3905, or something else? If somebody could post a close up of theirs, I'd be happy to track it from there.

Thanks!

SOLVED. It is a 02-4020 and not listed in the manual (that I could find). Bay Area amusements is out of stock, so it's find a suitable replacement or substitution.

Thanks Schwaggs, sorted on the weekend. Voltage was good, Replaced the fuse and something much more simpler, which I couldn't believe was that, every (yes, every!) GI lamp was blown. In with a bunch of 44s!

Before you buy, read this! Made all the difference to my flipper rebuilds and I brought the full kits too.

https://pinside.com/pinball/forum/topic/vids-guide-to-upgradingrebuilding-flippers

I'd be in for new plastics. I've got a CPR playfield and a Mayfair translite all in storage waiting for the restore. Just need to stop working overseas!

Ok, and thanks . where can we get red bats with the Williams w ?

Thank you for the kindness WD!