Quoted from Jigs:

I am looking for print files or a purchasable version for my Firepower cabinet labels.
ie. The service button decal, fuses, install 3 balls, and the rest of the warning etc
I'd prefer printing, but I'd be okay buying something like what flashinstinct sells for wpc
Thanks!
[quoted image]

Quoted from drewbo81:

Here is my FP restore I am finishing up. Pretty happy with the results even those numerous mistakes were made along the way.
[quoted image]

Quoted from wayout440:

Do we really need a club for EVERY GAME?

Quoted from keith20mm:

Pawing through my Firepower parts I came across a baggie with four pop bumper caps.
Three of these, "normal", are as in the right side of the photo, the odd one is on the left.
Do any of you know the history on this all red, partly upside down, little freak of nature?
[quoted image]

Quoted from CanadianPinball:

Lower plug. 3 red, 2 blue and 2 black
http://www.firepowerpinball.com/downloads/PowerBoard.pdf

Quoted from scampcamp:

I have a big problem... I installed 555 sockets in the pop bumpers. (Wires were connected the way the original sockets were)throughout the game.
Everything worked fine before the 555 pop bumper sockets & leds were put in.
At 1st.. it was fine. I then noticed a few controlled leds were not working... most leds turned off in backbox.... then I saw smoke from under playfield.... not sure where from.... but near pop bumpers.
Could this be what Vid1900 was talking about when he mentioned things can go bad if polarities are wrong etc?
Any info appreciated?

Quoted from pacman11:

Thanks man!

Quoted from hodgesm0:

Hey guys, having an issue with my right flipper, low power and does not hold very well, any weight (i.e. the ball) on the flipper will cause it to drop and start vibrating/popping. I have checked the switch and seems to be functional and adjusted correctly. Could it be a bad coil (hold winding)? Any thoughts would be greatly appreciated. Left flipper works perfectly.

Quoted from mtn-:

That cap looks fucking awesome. I will get those when I finally do the pf swap.

Quoted from metal-mods:

For the first Firepower. Center decal and ring are both chrome mirror, whereas the Firepower 2 picture has an "oil slick" chrome center that shows different colors depending on lighting and eye movement.
[quoted image][quoted image]

Quoted from Xtraball:

I think I’m liking these! So I buy a solid color bumper cap of my liking and stick these on? I can do that!

Quoted from djreddog:

Joining the club for the first time. Pretty good condition in my opinion. Has a new Rottendog MPU, but game won’t start up fully as it blows one of the fuses when you press start. Haven’t done any troubleshooting yet but hoping to look at it tomorrow. [quoted image][quoted image][quoted image][quoted image]