Photo: pinballphotos
  1. » Forum
  2. » Electro-Mechanical
  3. » EM Pinball Hangout
  4. » The EM seeking parts thread.
(Topic ID: 93586)

The EM seeking parts thread.

By Shapeshifter

9 years ago


Topic Heartbeat

Topic Stats

  • 10,341 posts
  • 869 Pinsiders participating
  • Latest reply 33 hours ago by pinhead52
  • Topic is favorited by 239 Pinsiders

You

Linked Games

There are more than 8 games linked to this topic.
Click here to show all linked games

Topic Gallery

View topic image gallery

2a3050 (resized).JPG
screws (resized).jpg
IMG_9440 (resized).JPG
1963 Williams Swing Time 0-9 Unit (resized).jpeg
20240413_020928 (resized).jpg
20240413_020936 (resized).jpg
IMG_1318 (resized).jpeg
2024-04-0417.00.316715360306857317667.jpg
IMG_2395 (resized).JPG
IMG_2394 (resized).JPG
aztec1 (resized).jpg
gtbparadise.jpeg
20240325_122857.jpg
20240325_105918 (resized).jpg
IMG_0448 (resized).jpeg
image (resized).jpg

You're currently viewing posts by Pinsider znet.
Click here to go back to viewing the entire thread.

0
0
0
#448 9 years ago
 
BHZ

ZNET

Pinside+ Frequent

12y 135K 1,923

I am seeking to buy some items for my 1955 United Super Slugger (same parts were utilized on the Deluxe version as well as on the 1956 United Star Slugger & Star Super Slugger). The parts are depicted in the photos below and they are as follows:

1) U.M.C. COIN CHUTE;
2) Any plastic players in the running man unit ESPECIALLY THE BATTER;
3) MOTOR #5114 for the running man unit.

The U.M.C. coin chute was also used on some of United's early 1950's shuffle alleys.

Many thanks,
Bruce
[email protected]
609-707-4666

$_57.JPG$_57.JPG
$_57-354.JPG$_57-354.JPG
image-24.jpgimage-24.jpg
$_57-745.JPG$_57-745.JPG

6 months later
0
0
0
#1049 8 years ago
 
BHZ

ZNET

Pinside+ Frequent

12y 135K 1,923

If you're in the market for 5 rusty pinball balls, don't delay. Here's a bargain. . .only $100 and shipping is free. This seller has some wonderful deals on rusty light sockets, old #47 lamps and stained plastic posts.

ebay.com link: misc parts balls Bally Balls A Poppin 1950s pinball part

10 months later
0
0
0
#2174 8 years ago
 
BHZ

ZNET

Pinside+ Frequent

12y 135K 1,923

Quoted from Alan_L:

Steve Young told me once that the entire production run of Canada Dry (2,885 units) was shipped to a Gottlieb distributor in France.

I recently played a Canada Dry at the Silverball Museum in Asbury Park, New Jersey.

0
0
0
#2181 8 years ago
 
BHZ

ZNET

Pinside+ Frequent

12y 135K 1,923

Quoted from illawarra92:

looking for 2 metal flipper buttons circa 1970 for gottlieb

20160403_203701-1_(resized).jpg

Pinball Resource (Steve Young) used to have those in stock.

2 months later
0
0
0
#2345 7 years ago
 
BHZ

ZNET

Pinside+ Frequent

12y 135K 1,923

Quoted from dr_nybble:

I need a set of woodrail legs for my Williams Spitfire. From what I can tell the legs were 32.5" whereas Gottlieb legs were 31". But a nice set of Gottlieb would be great too.
I see some sets on ebay but they look pretty rough. If I can't find any nicer ones maybe I'll have a go at those.
Thanks for any replies!

I have a nice set of wooden Williams legs. Feel free to send me a private message with your email and I'll send photos.

5 months later
0
0
0
#2727 7 years ago
 
BHZ

ZNET

Pinside+ Frequent

12y 135K 1,923

Quoted from tengle93:

With all those Whoa Nellie conversions, I'm sure there is a Continental Cafe playfield kicking around out there. Looking for one in decent shape. Mine is pretty shot. PM me if you have something. Thanks
Todd

Todd. I have a nice Continental Cafe playfield available (as a consequence of my Whoa Nellie conversion). I am off of exit 4 of the NJ Turnpike, not far from you. I just sent you a private message.

1 year later
0
2
2
#3742 6 years ago
 
BHZ

ZNET

Pinside+ Frequent

12y 135K 1,923

Quoted from electricsquirrel:

I need two score reels for a Chicago Coin Deville bowler.
Thanks !
E

Did someone mention score reels? I have a few extras, some loose and others on mechanisms. Feel free to send me a message, if you see any suitable ones.

I really have reels. . .really.

20171219_200449 (resized).jpg20171219_200449 (resized).jpg

20171219_201140 (resized).jpg20171219_201140 (resized).jpg

20171219_201238 (resized).jpg20171219_201238 (resized).jpg

20171219_201324 (resized).jpg20171219_201324 (resized).jpg

3 months later
0
1
1
#4073 6 years ago
 
BHZ

ZNET

Pinside+ Frequent

12y 135K 1,923

I am hoping that a fellow Pinsider can help me locate the missing "swirl-style" Bakelite globes (or something similar) which flank the marquee for my project 1953 Exhibit Supply Space Gun arcade. It's possible that a woodrail pinball machine utilized such globes.

Photos 2 & 3 show my game, which is missing the correct Bakelite globes.

Photos 4 & 5 are stock photos showing the space gun and the targets.

Photo 6 shows a friend's Space Gun which has the correct Bakelite globes, for reference.

The object is, of course, to shoot moving targets, in this case, 4 eerie glow-in-the-dark spacemen. When struck, the spaceman target is knocked down. Unlimited shots during the timed game which runs for 60 seconds. The targets are painted fluorescent colors and are illuminated by a black light. A bell audio feature is activated with successful shot.

post-16-0-65611400-1428772487 (resized).jpgpost-16-0-65611400-1428772487 (resized).jpg

30222074_1429507200488573_7282127693296959488_n (resized).jpg30222074_1429507200488573_7282127693296959488_n (resized).jpg

29791836_1429507220488571_7431911486584258560_n (resized).jpg29791836_1429507220488571_7431911486584258560_n (resized).jpg

espacgu5 (resized).jpgespacgu5 (resized).jpg

espacgu6 (resized).jpgespacgu6 (resized).jpg

20160423_160525 (resized).jpg20160423_160525 (resized).jpg

2 months later
0
0
0
#4338 5 years ago
 
BHZ

ZNET

Pinside+ Frequent

12y 135K 1,923

1967 Bally SURFERS. I am seeking to buy any playfield plastics for this game. I especially need the plastic behind the upper flipper (as shown in the photo below). Mine has a couple of thumbnail sized imperfections around that flipper, as depicted.

Also, I seek original bumper caps for this game with little or no bulb burn. I know that PBR has repros.

Third, I wish to find an original rules card. Mine is missing the top half.

Last, there's an optional add-a-ball relay corresponding to this game, which I seek. Thanks!

20180630_194843 (resized).jpg20180630_194843 (resized).jpg20180630_195353 (resized).jpg20180630_195353 (resized).jpg

Post last edited 5 years ago: “Added request for rules card.”

1 month later
0
0
0
#4406 5 years ago
 
BHZ

ZNET

Pinside+ Frequent

12y 135K 1,923

Seeking the internal cabinet bracket which supports the right side of the playfield for a 1967 Bally Rocket III (utilized on several Ballys of that era).
Here are photos. Thanks.

20180803_110922 (resized).jpg20180803_110922 (resized).jpg20180803_110945 (resized).jpg20180803_110945 (resized).jpg20180803_111020 (resized).jpg20180803_111020 (resized).jpg
0
0
0
#4410 5 years ago
 
BHZ

ZNET

Pinside+ Frequent

12y 135K 1,923

Quoted from RacingPin:

I have this. It looks like a match but you might need to drill the peg out for an exact match
[quoted image][quoted image]
Mike V

Thanks, Mike. That's it.

1 month later
0
2
2
#4434 5 years ago
 
BHZ

ZNET

Pinside+ Frequent

12y 135K 1,923

Weeze,
There's a current eBay auction offering 3 complete Gottlieb coin chutes, each in nice condition, for $20 each (buy-it-now), plus $4 shipping. The auction is entitled: "Gottlieb em pinball machine coin chute coin door B-10708 B-10707 both parts." The seller, in Michigan,has a perfect feedback rating. Good luck!

Quoted from weeze:

Jeeze, really encouraging there,
People have these, I used to have a couple but I used them. Must be someone out there that wants to trade or sell from a game that got parted out.
By the way I did try and buy a beater game that had those and just missed out.
Ive got a couple complete Gottieb chime sets as trade bait.Just havent gotten around to post a bunch of TRADE posts yet.
I dont think its so impossible at all.

0
0
0
#4438 5 years ago
 
BHZ

ZNET

Pinside+ Frequent

12y 135K 1,923

Quoted from RacingPin:

Those are the later internal versions that are quite common and less sought after.
The hard to get ones are the earliest that stick out and have a rounded end. The other kind also stick out and has an angle to it that is more common. Which kind is needed here?
Mike V

He needs the earlier style. Indeed, the earlier ones are somewhat scarce.

1 week later
0
0
0
#4461 5 years ago
 
BHZ

ZNET

Pinside+ Frequent

12y 135K 1,923

I am seeking:
1) apron for a 1968/69 Bally Cosmos;
2) red flippers for this game (raised lettering). One is cracked on my game; and
3) plunger cover.
Photo below. Thanks.

20180915_193031 (resized).jpg20180915_193031 (resized).jpg

Post last edited 5 years ago: “Added plunger cover”

3 weeks later
0
0
0
#4475 5 years ago
 
BHZ

ZNET

Pinside+ Frequent

12y 135K 1,923

Quoted from zaphod:

[quoted image]
Still looking for the unobtainium: OXO bumper caps. One blue, One green.
-- Tom

A couple of these Oxo caps are currently listed on eBay. Search "Williams EM pop bumper caps."

4 weeks later
0
0
0
#4514 5 years ago
 
BHZ

ZNET

Pinside+ Frequent

12y 135K 1,923

I will pay up to $100 for a Bally APRON. The style is depicted in the attached photo.

It is for my 1969 Bally Cosmos; however, this green apron was utilized on other Bally titles as well. My want-ad is below. Many thanks.

https://pinside.com/pinball/forum/topic/apron-wanted-for-ball

bally-cosmos-pinball-machine-four_1_bae5f5ca00fe176eaff9a415f554f2b4 (resized).jpgbally-cosmos-pinball-machine-four_1_bae5f5ca00fe176eaff9a415f554f2b4 (resized).jpg
2 weeks later
0
2
2
#4548 5 years ago
 
BHZ

ZNET

Pinside+ Frequent

12y 135K 1,923

Quoted from 4Max:

Happy Thanksgiving to all Pinsiders.
Looking for a complete knocker assembly - someone completely removed the one from my 1967 Williams Touchdown. I assuming any EM knocker will work, and so just looking for something cheap, not bothered about condition (as long as the coil is ok). Yep, I could get one from PBR or Ebay for $35, but I was hoping get a bargain from someone (yes, I'm being cheap!).
Thanks

I have one. PM me.

2 months later
0
2
2
#4850 5 years ago
 
BHZ

ZNET

Pinside+ Frequent

12y 135K 1,923

Here's what I have available, for later Gottlieb wedgeheads.

20190210_221606 (resized).jpg20190210_221606 (resized).jpg20190210_221653 (resized).jpg20190210_221653 (resized).jpg20190210_221635 (resized).jpg20190210_221635 (resized).jpg

1 month later
0
0
0
#4941 5 years ago
 
BHZ

ZNET

Pinside+ Frequent

12y 135K 1,923

Quoted from Budgiecougar:

Hi Guy's,
I am after a ball gate for an El Dorado, doing a restore on one and this part is missing and no one seems to be making them. Any help sourcing one would be greatly appreciated. I am located in Australia.

Photo?

0
0
0
#4943 5 years ago
 
BHZ

ZNET

Pinside+ Frequent

12y 135K 1,923

Quoted from boilerman:

i am thinking he is taking abouth these, but the are available as far as i know
https://www.marcospecialties.com/pinball-parts/A-18469
[quoted image]

I likely have these.

0
0
0
#4946 5 years ago
 
BHZ

ZNET

Pinside+ Frequent

12y 135K 1,923

Quoted from MikeO:

The ball gate on El Dorado is different.
This is what he needs but PBR says they are out.
http://www.pbresource.com/gtbsd/gtb-a15550.jpg

I think that I have that alternative style arch gate as well.

0
1
1
#4956 5 years ago
 
BHZ

ZNET

Pinside+ Frequent

12y 135K 1,923

Quoted from Budgiecougar:

Hi Guy's,
I am after a ball gate for an El Dorado, doing a restore on one and this part is missing and no one seems to be making them. Any help sourcing one would be greatly appreciated. I am located in Australia.

Here is the gate I have. Is this what you're seeking?

20190328_184109 (resized).jpg20190328_184109 (resized).jpg20190328_184137 (resized).jpg20190328_184137 (resized).jpg
1 week later
0
0
0
#4971 5 years ago
 
BHZ

ZNET

Pinside+ Frequent

12y 135K 1,923

Quoted from PinballFever:

Seeking a 4" bell for a Williams 50's game (1953 Grand Champion to be exact) the same as this one from IPDB. It's about 1 1/8" deep.[quoted image]

I likely have a Williams 4" bell.

0
1
1
#4973 5 years ago
 
BHZ

ZNET

Pinside+ Frequent

12y 135K 1,923

Quoted from PinballFever:

Seeking a 4" bell for a Williams 50's game (1953 Grand Champion to be exact) the same as this one from IPDB. It's about 1 1/8" deep.[quoted image]

Here are the 3 bells I have available. The center one measures about 4 1/2 inches wide and is about 1 1/8 inches deep.

The other two bells appear to be for Gottlieb woodrails. These two bells are 5 inches wide and about 1 1/4 inches deep.

20190408_223906 (resized).jpg20190408_223906 (resized).jpg20190408_223934 (resized).jpg20190408_223934 (resized).jpg20190408_224041 (resized).jpg20190408_224041 (resized).jpg20190408_224102 (resized).jpg20190408_224102 (resized).jpg
1 month later
0
0
0
#5091 4 years ago
 
BHZ

ZNET

Pinside+ Frequent

12y 135K 1,923

Quoted from novaguy:

Hey all.anybody have any 5 inch bells?
Ted

I have a couple.

20190408_223906 (resized).jpg20190408_223906 (resized).jpg
0
1
1
#5093 4 years ago
 
BHZ

ZNET

Pinside+ Frequent

12y 135K 1,923

Quoted from novaguy:

How much for all 3?

To be clear, the 2 outside bells are 5 inch. The bell in the center with bracket and solenoid is 4 1/2 inches. I will PM you.

20190511_195954 (resized).jpg20190511_195954 (resized).jpg
2 months later
0
2
2
#5355 4 years ago
 
BHZ

ZNET

Pinside+ Frequent

12y 135K 1,923

Quoted from mrm_4:

Anyone have this cap? Mine is broken and PBR appears to only offer 1-9[quoted image]

I have 2 original blanks with nice marbeling. PM me, if interested.

20190806_232028 (resized).jpg20190806_232028 (resized).jpg
0
4
4
#5371 4 years ago
 
BHZ

ZNET

Pinside+ Frequent

12y 135K 1,923

Quoted from Spyderturbo007:

Anyone have one of these switches. Someone installed one that’s too short.
The entire switch is 1 3/8”, with the actual metal switch blades being 7/8”
I’m also still in the market for plastics from a Bally Safari and willing to pay handsomely for them if that motivates anyone.
[quoted image]

Message me if any of these switches meet your needs.

20190811_143142 (resized).jpg20190811_143142 (resized).jpg20190811_143203 (resized).jpg20190811_143203 (resized).jpg20190811_143222 (resized).jpg20190811_143222 (resized).jpg
4 weeks later
0
0
0
#5448 4 years ago
 
BHZ

ZNET

Pinside+ Frequent

12y 135K 1,923

Quoted from edward472:

but I know that's a super long shot.[quoted image]

No pun intended.

3 weeks later
0
0
0
#5543 4 years ago
 
BHZ

ZNET

Pinside+ Frequent

12y 135K 1,923

Quoted from EM-PINMAN:

They don't come up that often, so if you really need one, get it. The cheapest I have seen them complete and in good shape is $50.00 + shipping and that was a couple years ago.

I am pretty sure that I have an extra Midway coin box available for $50. PM me.

3 weeks later
0
0
0
#5634 4 years ago
 
BHZ

ZNET

Pinside+ Frequent

12y 135K 1,923

Quoted from Mahoyvan:

Looking for a Ball Lift Rod for my 1949 Gottlieb Double-Shuffle (woodrail).
Example:
[quoted image]
Any leads would be appreciated!

I probably have one available, with a metal knob. I don't think that PBR carries this item. I remember having difficulty locating Gottlieb ball lift rods 10 years ago.

2 months later
0
0
0
#5820 4 years ago
 
BHZ

ZNET

Pinside+ Frequent

12y 135K 1,923

Quoted from Murphdom:

Hello,
I’m looking for a Gottlieb 2001 backglass if anyone has one. Thanks!

Ron and Nancy Webb in NJ made a silkscreened 2001 repro last year. Email: [email protected].

You may want to contact them.

0
0
0
#5825 4 years ago
 
BHZ

ZNET

Pinside+ Frequent

12y 135K 1,923

Quoted from pinhead52:

http://pinballglass.homestead.com/

I suggested contacting Ron Webb via email because his website doesn't list 2001. I know that he was planning a small run of Gottlieb 2001 in early 2019. He may have one available but not listed.

2 months later
0
1
1
#6021 4 years ago
 
BHZ

ZNET

Pinside+ Frequent

12y 135K 1,923

Quoted from Electrocute:

What game is seen in the reflection?

Looks like Gottlieb Abra Ca Dabra.

0
1
1
#6024 4 years ago
 
BHZ

ZNET

Pinside+ Frequent

12y 135K 1,923

Quoted from Electrocute:

What game is seen in the reflection?

Side-by-side comparison is pretty compelling.

20200314_153055 (resized).jpg20200314_153055 (resized).jpg20200314_153319 (resized).jpg20200314_153319 (resized).jpg
0
0
0
#6027 4 years ago
 
BHZ

ZNET

Pinside+ Frequent

12y 135K 1,923

Quoted from luch:

gottlieb wizard[quoted image]

Yep. Wizard it is.

0
0
0
#6057 4 years ago
 
BHZ

ZNET

Pinside+ Frequent

12y 135K 1,923

Quoted from Pinaddict91:

NEED a full chime unit for a Gottlieb Strange world and a-4893 Pop bumper coil for it as well used on both is fine as long as working. Can pay via paypal or Trade Williams coin door, & Schematics for triple action pin as well. Please let me know what you have id really love to get this holy grail pin working. Thanks

I have a nice Gottlieb chime unit. PM me.

1 month later
0
2
2
#6234 3 years ago
 
BHZ

ZNET

Pinside+ Frequent

12y 135K 1,923

Quoted from PinDeLaPin:

Picked up a fun new toy that I will be getting to in a few months. It's a1973 Midway Duck Hunt and 2 things I need right off the bat is a coin door as this one isn't salvageable at all. The 2nd thing I need is the little round glass piece that focuses the light that goes at the end of the gun barrel. If anyone has a lead on these or has 1 please send me a pm. Thanks.[quoted image]

I have 2 original seventies vintage Midway arcade coin door decals available. Message me, if interested.

These are originals, new old stock, with an embossed area, as depicted..

20200426_203001 (resized).jpg20200426_203001 (resized).jpg
0
2
2
#6261 3 years ago
 
BHZ

ZNET

Pinside+ Frequent

12y 135K 1,923

Quoted from ZNET:

I have 2 original seventies vintage Midway arcade coin door decals available. Message me, if interested.
These are originals, new old stock, with an embossed area, as depicted..[quoted image]

These original stickers each measure 6 by 2 inches, which fit the standard Midway vintage 1970s coin door.

20200430_215450 (resized).jpg20200430_215450 (resized).jpg20200430_215536 (resized).jpg20200430_215536 (resized).jpg
1 month later
0
0
0
#6510 3 years ago
 
BHZ

ZNET

Pinside+ Frequent

12y 135K 1,923

Quoted from Beatnik-Filmstar:

Working on a Jacks Open and I'm missing the coinbox. Can anyone confirm this page regarding the style I should be looking for?
https://pinwiki.com/wiki/index.php?title=Coinbox/Cashbox_Identification_Guide#1975_.26_Later
Three holes in the top - evenly spaced?
[quoted image]
[quoted image]

I have several coin boxes available, including that style. If interested, send me a private message.

2 months later
0
0
0
#6758 3 years ago
 
BHZ

ZNET

Pinside+ Frequent

12y 135K 1,923

Quoted from Vintage-Pinball:

Does anyone have a coin door ( or just the ancillaries) that would fit a Bally Trail drive please? It's not for me but a guy in N.Ireland who isnt a member here. He has the main door but the ancillaries are missing so a full door might be easiest. Thanks!

I have a complete Bally door for Trail Drive. Message me.

0
1
1
#6759 3 years ago
 
BHZ

ZNET

Pinside+ Frequent

12y 135K 1,923

Quoted from Vintage-Pinball:

Does anyone have a coin door ( or just the ancillaries) that would fit a Bally Trail drive please? It's not for me but a guy in N.Ireland who isnt a member here. He has the main door but the ancillaries are missing so a full door might be easiest. Thanks!

Here's a Bally door with mechanisms, which I have available. Also, an extra coin plate, coin mech, and vinyl glass canopy channel are available, as pictured.

The extra ball relay shown is sold. Message me if interested.

20200822_014925 (resized).jpg20200822_014925 (resized).jpg20200822_014938 (resized).jpg20200822_014938 (resized).jpg
0
1
1
#6772 3 years ago
 
BHZ

ZNET

Pinside+ Frequent

12y 135K 1,923

Quoted from DropTarget:

Hi all,
Does anyone have a Williams (although I think Gtb would work) knocker bracket and plunger? I have the coil.
oh and yes, the all elusive Williams plastic ball shooter housing?
thx

I have a complete Gottlieb knocker, bracket and coil available in nice condition. Message me, if interested.

1 month later
0
0
0
#6878 3 years ago
 
BHZ

ZNET

Pinside+ Frequent

12y 135K 1,923

Quoted from Pinballprowess:

The two top rollover lane guides used on Central Park & Hurdy Gurdy.
Don't have a picture but they look like two inch flippers but don't say "flipper" on them.
Looking for used 'original' but would gladly take NOS parts.
I think I'd be fooling myself looking for those though, since I can't seem to even find 'used'

Looks like I have one used white one with a yellowish patina and one marbled green one, both with no lettering on top as shown in attached photos.

20200930_004705 (resized).jpg20200930_004705 (resized).jpg20200930_004729 (resized).jpg20200930_004729 (resized).jpg20200930_004751 (resized).jpg20200930_004751 (resized).jpg
1 month later
0
1
1
#6992 3 years ago
 
BHZ

ZNET

Pinside+ Frequent

12y 135K 1,923

Quoted from pinhead52:

I need a coin door from a late 70s Gottlieb, big sq door. need decent skin and the mechanics for a 2 slot, Dont need the frame.
There are a couple of pricey ones on ebay...
Ken

I have this available.

20201124_202251 (resized).jpg20201124_202251 (resized).jpg20201124_202308 (resized).jpg20201124_202308 (resized).jpg
0
0
0
#6993 3 years ago
 
BHZ

ZNET

Pinside+ Frequent

12y 135K 1,923

Quoted from edward472:

Looking for this Midway score reel
[quoted image][quoted image][quoted image][quoted image]

I have this reel available.

20201124_203254 (resized).jpg20201124_203254 (resized).jpg20201124_203311 (resized).jpg20201124_203311 (resized).jpg
0
0
0
#6994 3 years ago
 
BHZ

ZNET

Pinside+ Frequent

12y 135K 1,923

Quoted from ZNET:

I have this reel available.[quoted image][quoted image]

Here are the numeral fonts. Good condition overall.

20201124_203222 (resized).jpg20201124_203222 (resized).jpg20201124_203239 (resized).jpg20201124_203239 (resized).jpg
1 month later
0
0
0
#7169 3 years ago
 
BHZ

ZNET

Pinside+ Frequent

12y 135K 1,923

Quoted from clubninja:

Hi folks -- this number 6 bumper cap is an example from an Exhibit Air Circus I'm cleaning up. I'm missing a matching number 7 cap. Does anyone happen to have one or can point me in the right direction? There's one pictured at PBR that looks close, but it doesn't look like it's going to have the marbling.
Relatedly, I'm also missing the knob for the end of the ball lift push rod. Does anyone have a recommendation there? Thanks!
[quoted image]

I may have one. PM me to remind me, please.

0
3
3
#7171 3 years ago
 
BHZ

ZNET

Pinside+ Frequent

12y 135K 1,923

Quoted from clubninja:

Hi folks -- this number 6 bumper cap is an example from an Exhibit Air Circus I'm cleaning up. I'm missing a matching number 7 cap. Does anyone happen to have one or can point me in the right direction? There's one pictured at PBR that looks close, but it doesn't look like it's going to have the marbling.
Relatedly, I'm also missing the knob for the end of the ball lift push rod. Does anyone have a recommendation there? Thanks!
[quoted image]

I have these 2 original marbelized caps in excellent condition.

20210107_182942 (resized).jpg20210107_182942 (resized).jpg20210107_183005 (resized).jpg20210107_183005 (resized).jpg
1 month later
0
0
0
#7473 3 years ago
 
BHZ

ZNET

Pinside+ Frequent

12y 135K 1,923

Quoted from Steve_in_Escalon:

Gottlieb 2001 has a 2-part flipper button bushing that is installed in the side of the cabinet. These bushing are no longer available from Steve Young. Does anyone have a new or used set for sale? I would prefer to replace them on both sides of the cabinet.
Thanks in advance!

Can you post a photo? If so, I will check my inventory.

3 months later
0
1
1
#7779 2 years ago
 
BHZ

ZNET

Pinside+ Frequent

12y 135K 1,923

Quoted from Mopar:

I would have thought I also had 1", but the only ones I've seen are in machines..
I remember Bruce (ZNet) had a selection of different Score Reels. You might want
to check with him..

I had dozens of reels, at one point. Alas, here's what's left.

20210614_131301 (resized).jpg20210614_131301 (resized).jpg
4 weeks later
0
2
2
#7895 2 years ago
 
BHZ

ZNET

Pinside+ Frequent

12y 135K 1,923

Quoted from arzoo:

Longshot here but looking for a backglass for a 1971 Bally Firecracker.

I have a decent Firecracker backglass available. I could bring it to Pinfest in 2 weeks.

3 months later
0
0
0
#8173 2 years ago
 
BHZ

ZNET

Pinside+ Frequent

12y 135K 1,923

Quoted from Mopar:

Today I had my order built up enough to put one in, so I called Steve and during
our conversation, pop bumper sockets are no longer in stock, and it may be quite
some time (even ever) before he has any.
Does anyone know of another source that supplies pop bumper sockets for #47 (well
#51 is what we all mostly use) bulbs? When I'm rebuilding Pops, I'd much rather go new
on the sockets. Marcos has sockets, but doesn't look like any for the #51 bulbs..

I may have some new ones. Please remind me via private message.

0
1
1
#8197 2 years ago
 
BHZ

ZNET

Pinside+ Frequent

12y 135K 1,923

Quoted from Murphdom:

I’m looking for one of these if anyone has one
[quoted image][quoted image]

I have a few. Message me.

0
2
2
#8199 2 years ago
 
BHZ

ZNET

Pinside+ Frequent

12y 135K 1,923

Quoted from Murphdom:

I’m looking for one of these if anyone has one
[quoted image][quoted image]

Here's what I have available. Top row are passive pop bumper housings. The others are active pop bumper housings.

As I recall, Pinball Resource never had duplicate repros. Instead, PBR had more angular replacements.

20211023_231350 (resized).jpg20211023_231350 (resized).jpg
1 month later
0
1
1
#8342 2 years ago
 
BHZ

ZNET

Pinside+ Frequent

12y 135K 1,923

Quoted from Jets_1479:

Looking for 2 Chicago coin score reel parts. Game is a ‘64 mustang. I know Bronco is mostly the same as well.
This one had a small fire in the head. One score reel melted as well as the operating arm/pawl that goes from the plunger the drive mechanism. Anyone have either part willing to let go?[quoted image][quoted image][quoted image][quoted image]

I have those parts. PM me.

3 weeks later
0
6
6
#8443 2 years ago
 
BHZ

ZNET

Pinside+ Frequent

12y 135K 1,923

I have these old bumper caps available.

20211218_213813 (resized).jpg20211218_213813 (resized).jpg20211218_213824 (resized).jpg20211218_213824 (resized).jpg20211218_213831 (resized).jpg20211218_213831 (resized).jpg20211218_214013 (resized).jpg20211218_214013 (resized).jpg20211218_214645 (resized).jpg20211218_214645 (resized).jpg
1 month later
0
3
3
#8552 2 years ago
 
BHZ

ZNET

Pinside+ Frequent

12y 135K 1,923

Quoted from SpyroFTW:

But is yours nicer?

I have 2 Gottlieb lockdown bars available. One is extremely nice. The other is less nice.

The nice one is on top in the 2 photos. No dents, no chips on that one.

PM me, if interested. Donation to Pinside if sale occurs.

20220125_231111 (resized).jpg20220125_231111 (resized).jpg20220125_231134 (resized).jpg20220125_231134 (resized).jpg
0
2
2
#8573 2 years ago
 
BHZ

ZNET

Pinside+ Frequent

12y 135K 1,923

Quoted from undrdog:

These metal covers are from a 1957 Wms machine. I’m looking for more , in different lengths.
I could look around for them if I knew what they are called . Anyone know?[quoted image]

Coincidentally, I posted a large variety of EM playfield metal on the Woodrail Facebook page last weekend. Most of it is spoken for.

However, below are photos of the remaining items. PM me with any interest. Pinside donation will accompany a purchase.

20220127_195804 (resized).jpg20220127_195804 (resized).jpg20220127_195829 (resized).jpg20220127_195829 (resized).jpg
0
1
1
#8579 2 years ago
 
BHZ

ZNET

Pinside+ Frequent

12y 135K 1,923

Quoted from DropTarget:

How much for the 2nd tape measure?

I'm donating it to the Smithsonian. It's a prototapetype.

1 week later
0
0
0
#8602 2 years ago
 
BHZ

ZNET

Pinside+ Frequent

12y 135K 1,923

Quoted from smohr:

1951 Williams Horse Shoes - Also looking for 3 good used or new 4 hole "RED" dead pop bumper skirts. PBR and Marco are out of stock.
I know the pic is yellow but I need red.
Thanks
Steve
[quoted image]

I probably have some good red ones available. Please PM me.

0
0
0
#8603 2 years ago
 
BHZ

ZNET

Pinside+ Frequent

12y 135K 1,923

Quoted from smohr:

Found some locally Thank you jsf24 - Thank you to those who responded….
1951 Williams Horse Shoes - Also looking for 3 good used or new 4 hole "RED" dead pop bumper skirts. PBR and Marco are out of stock.
I know the pic is yellow but I need red.
Thanks
Steve
[quoted image]

I have 1 new red skirt available, if your local purchase falls through or if other sources have insufficient quantity.

20220205_145951 (resized).jpg20220205_145951 (resized).jpg
1 month later
0
0
0
#8696 2 years ago
 
BHZ

ZNET

Pinside+ Frequent

12y 135K 1,923

Quoted from BleacherBum:

I need to replace some of the silicone edge gasket/protector for a Bally pin (Space Time) playfield glass. This is one of the Bally’s that has the glass contained in in a metal frame.
Anyone know where I can order this?
Thanks,
Phil
[quoted image]

I have 1 side gasket and also the end gasket available. The side piece could be cut in half for use on the other side.
Originals in good shape.

1 week later
0
0
0
#8710 2 years ago
 
BHZ

ZNET

Pinside+ Frequent

12y 135K 1,923

Quoted from illawarra92:

set of plastics for 2001 - even just the center one [quoted image]

I think that I have an original center plastic and a slingshot. If you message me, I will remember to check. I definitely have a slingshot plastic.

0
1
1
#8717 2 years ago
 
BHZ

ZNET

Pinside+ Frequent

12y 135K 1,923

Quoted from illawarra92:

set of plastics for 2001 - even just the center one [quoted image]

I have a broken center plastic and a slingshot plastic for Gottlieb 2001, as shown.

I also have some Gottlieb Atlantis original plastics (left) and some new repros (right), as shown.

20220331_222734 (resized).jpg20220331_222734 (resized).jpg20220331_222836 (resized).jpg20220331_222836 (resized).jpg
1 week later
0
2
2
#8758 2 years ago
 
BHZ

ZNET

Pinside+ Frequent

12y 135K 1,923

Quoted from Peruman:

I’m looking for at least 9 of these threaded playfield posts. These go into 6/32 t-nuts. The total length is 2”.
Both PBR and Marco are out of stock on the ones with the threaded top.
Alberto
[quoted image]

I'm sure that I have several available.

0
2
2
#8778 2 years ago
 
BHZ

ZNET

Pinside+ Frequent

12y 135K 1,923

Quoted from pinhead52:

I need... the L bracket on bottom side Gottlieb 70's era playfields, the one with the hole that the lockdown bar handle locks into with its nub. Restoring a game that came in in pieces...
Ken

I have 2 available.

20220417_152025 (resized).jpg20220417_152025 (resized).jpg
2 weeks later
0
1
1
#8852 1 year ago
 
BHZ

ZNET

Pinside+ Frequent

12y 135K 1,923

Quoted from HydrogenHuman:

Looking for a replacement baseball plastic for Gottlieb Grand Slam (1953), as the paint wore off on one of mine.
[quoted image]

I have suitable repros. PM me, if interested.

1 month later
0
0
0
#8954 1 year ago
 
BHZ

ZNET

Pinside+ Frequent

12y 135K 1,923

1975 Bally Wizard! A friend (who is not on Pinside) is seeking parts for the bonus unit or the whole unit for this game. Thanks. PM me.

Screenshot_20220614-015143_Chrome (resized).jpgScreenshot_20220614-015143_Chrome (resized).jpg
4 months later
0
0
0
#9331 1 year ago
 
BHZ

ZNET

Pinside+ Frequent

12y 135K 1,923

Quoted from BleacherBum:

Not really a part but, since the want ad I posted hasn’t yielded any results I thought a
I would try here.
Wanted
ITEM DESCRIPTION
I looking for an original advertising/ promotional flyer for a 1965 Gottlieb Bank a Ball. If you have one your willing to part with, shoot me. PM.
Thanks,
Phil

I am pretty sure that I have that original flyer. I will message you.

2 weeks later
0
0
0
#9373 1 year ago
 
BHZ

ZNET

Pinside+ Frequent

12y 135K 1,923

Quoted from MadPole:

I'm looking for a Bally 3" Score Reel to finish up my restoration of a Wizard!
It's my first time working on an EM, so I'm not exactly sure where to look for one of these.
Any and all help is appreciated.

I have one. Message me.

1 year later
0
0
0
#10156 4 months ago
 
BHZ

ZNET

Pinside+ Frequent

12y 135K 1,923

Quoted from leckmeck:

Looking for a mid-60s WMS meter with the bullet-nose contour (like the one pictured here) for a Palooka I’m restoring. I do have a spare 24-volt meter from a GTB game, but I want to try sourcing a correct-looking unit before using a substitute.
[quoted image]

I have an old rounded meter available and a newer angular one. Message me for more photos, if desired.
20231221_213459 (resized).jpg20231221_213459 (resized).jpg20231221_213513 (resized).jpg20231221_213513 (resized).jpg20231221_213527 (resized).jpg20231221_213527 (resized).jpg20231221_213544 (resized).jpg20231221_213544 (resized).jpg20231221_213557 (resized).jpg20231221_213557 (resized).jpg

Post last edited 4 months ago: “added photos”

3 months later
0
1
1
#10319 11 days ago
 
BHZ

ZNET

Pinside+ Frequent

12y 135K 1,923

Quoted from garyinmotion:

Probably a very random question, but I’ve searched out before asking here… I’m finishing a restoration and looking for a blank manufacturer’s certificate to attach to the arch (example photo attached). This is for Gottlieb’s 1978 Joker Poker SS. Can anyone suggest a resource?
Thank you,
Gary
[quoted image]

I have this original Joker Poker certificate and arch available.

20240413_020928 (resized).jpg20240413_020928 (resized).jpg20240413_020936 (resized).jpg20240413_020936 (resized).jpg
Promoted items from Pinside Marketplace and Pinside Shops!
From: € 50.00
Gameroom - Decorations
Williams oxo vector poster
Pin Art
 
900 (OBO)
Machine - For Sale
Paddock
Memphis, TN
Tonup69
$ 9.95
Eproms
ROM WORLD CUP -SOUND
Pinballrom
 
1,150 (Firm)
Machine - For Sale
Melody
Chicago, IL
natgreystar
$ 27.95
Eproms
ROM WORLD CUP -CPU
Pinballrom
 
From: $ 5.00
Cabinet Parts
Gottlieb Score Reel Guide Brackets / Slides
Space Coast Pinball
 
$ 109.00
Playfield - Plastics
Williams - Magic City Playfield Plastic Set - New 30C-329
Starcade Amusement
 
$ 69.00
Gameroom - Decorations
Bally WIZARD Pinball Banner (H) Officially Licensed
Pinball Pimp
 
$ 24.98
Hardware
Reproduction Target Face: Williams 3A-7431-4-5-18
Gameroom Mods
 
$ 55.00
Gameroom - Decorations
Pinball Coasters - Snow Marble (Set of 4) Pinball Gift
Pinball Photos LLC
 
From: $ 3.50
Playfield - Other
Patriot Posts - for USA & red/white/blue themes
Rocket City Pinball
 
965
Machine - For Sale
Triple Strike
Chesapeake, VA
Scheuejp
1,200 (OBO)
Machine - For Sale
Wizard!
Shrewsbury, MA
ballylama
From: $ 20.00
Various Novelties
NEW! Pinball Placemats (Symmetry) - Reversible
Pinball Photos LLC
 
$ 42.00
Playfield - Other
Colored Posts kit: Volley (Gottlieb)
Rocket City Pinball
 
$ 12.00
Playfield - Toys/Add-ons
World Cup '78 Apron Cards
UpKick Pinball
 
From: $ 15.00
Playfield - Decals
Derby Day 1967 Target Decals
Pinball Invasion
 
$ 10.00
Cabinet - Other
Snake Coin Door Inserts
UpKick Pinball
 
$ 12.00
Playfield - Toys/Add-ons
Old Chicago Apron Cards Bally
UpKick Pinball
 
$ 210.00
Cabinet Parts
Gottlieb Volley Reproduction Back glass (Plexiglass)
Creekside Hideaway, LLC
 
$ 12.00
Playfield - Toys/Add-ons
King Kool Apron Cards
UpKick Pinball
 
$ 24.98
Hardware
Reproduction Target Face: A-7073-1
Gameroom Mods
 
From: $ 1.00
Playfield - Other
Teal Posts (for accent colors on playfields!)
Rocket City Pinball
 
$ 29.00
Gameroom - Decorations
NEW! Smart Pinball Night-Light (When Lit) Glass + Translite
Pinball Photos LLC
 
$ 65.00
Gameroom - Decorations
Pinball Coasters - Snow Marble (Set of 4) Pinball Gift
Pinball Photos LLC
 
From: $ 1.00
Playfield - Other
Marble Posts (for games w/ black & white art or themes)
Rocket City Pinball
 
$ 10.00
Playfield - Protection
World Cup '78 Slingshot Plastic Protectors
UpKick Pinball
 
$ 69.00
Gameroom - Decorations
Bally CAPT. FANTASTIC Pinball Banner (V) Officially Licensed
Pinball Pimp
 
From: $ 33.00
Gameroom - Decorations
Game Room Decor: Abra Ca Dabra, by TurboFox Photography
Rocket City Pinball
 
Hey modders!
Open a free Shop and start selling on Pinside
Your shop name here

You're currently viewing posts by Pinsider znet.
Click here to go back to viewing the entire thread.

Reply

Wanna join the discussion? Please sign in to reply to this topic.

Hey there! Welcome to Pinside!

Donate to Pinside

Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!

This page was printed from https://pinside.com/pinball/forum/topic/the-em-seeking-parts-thread?tu=znet and we tried optimising it for printing. Some page elements may have been deliberately hidden.

Scan the QR code on the left to jump to the URL this document was printed from.