Dearborn, MI
Quoted from hoov:Still looking for a Big Indian drop target bank and center plastic.
I have the center one (Indian /w headdress, I assume).
PM me your info and it is yours.
(Topic ID: 93586)
Linked Games
"300"
Gottlieb, 1975-
2001
Gottlieb, 1971
-
8 Ball
Williams, 1966
-
Abra Ca Dabra
Gottlieb, 1975
-
Amigo
Bally, 1974
-
Aquarius
Gottlieb, 1970
-
Atlantis
Gottlieb, 1975
-
Bank-A-Ball
Gottlieb, 1965
There are more than 8 games linked to this topic.
Click here to show all linked games
Click here to show all linked games
Topic Gallery
You're currently viewing posts by Pinsider sirscott.
Click here to go back to viewing the entire thread.
5 months later
Quoted from way2wyrd:I think i got you. Ill look tonight. I have a parts williams head from around the same era
And if Jeff can't help, I have a couple that I can spare as well (provided they are the ones you need).
Ryan,
I think this is what you need. The coil number on yours is different than mine, but everything else looks to be the same. Note that the reels themselves are dark (with some of the areas darker than others)--you may be able to get them white(er) again?? And overall, they will need a good cleaning. If worse comes to worst, you would just need to replace the score reel itself.
IMG_2499 (resized).JPG
IMG_2498 (resized).JPG
IMG_2501 (resized).JPG
If you want me to send a couple of them your way, PM me your address.
Quoted from newmantjn:If you happen to pop a fuse with the replacement, I would look to replace this part.
I think he should be all set--I sent him some of these as well:
Quoted from balzofsteel:The rest looks great.
He didn't show a picture of the reels themselves. Hahahaha.
4 weeks later
Quoted from 1974DeltaQueen:I need a hold down bar for a 1964-66 wedgehead with the end caps .
OveralIMG_2512 (resized).JPG
Distance from end to post IMG_2509 (resized).JPG
Distance between posts (measured from center of post) IMG_2510 (resized).JPG
Overall length IMG_2504 (resized).JPG
Width IMG_2511 (resized).JPG
End cap IMG_2506 (resized).JPG
2 months later
Quoted from emguy:Still on the lookout for a 1961 Williams Space Ship lockdown bar. Please pm me if you know where one can be found. Thanks!
Does this work for you?
https://pinside.com/pinball/forum/topic/the-em-seeking-parts-thread/page/53#post-3379951
1 week later
Quoted from zaphod:the Sweet Heart set
I have a set of these plastics that I would let go for (much) cheaper than Pinball Rescue. I am not at home right now to check exact condition, but they are in very nice shape (may even be NOS).
1 week later
Quoted from 1974DeltaQueen:Before you LOL I have a very nice 72-75 bar to trade or sell
Dibs on a sale.
Quoted from Sijcolo:I am looking for a Williams lockdown bar for a 1961 double barrel. I'm trying to put this game back together. Any help tracking this down would be appreciated.
Not sure if this would work for you (doesn't have the carriage bolts like you show).
https://pinside.com/pinball/forum/topic/the-em-seeking-parts-thread/page/53#post-3379951
2 months later
Quoted from wayner:Anyone need some GTB wire spools??
Hahahaha. That is rich.
2 weeks later
Quoted from bob_e:best way is to text him
There is only an email listed under the "Contact Us" link.
1 month later
Quoted from Ballypin:Any one have a Bally "lift top" playfield glass frame used on games from 1967 to 1973?
John Dayhuff (@Dayhuff) had one for sale at the Kzoo show. I would hit him up to see if he still has it.
1 month later
Quoted from bronco-jon:Look here, I found one. WOW!!!
https://www.flippers.com/catalog/product_info.php/player-unit-wiper-assy-p-1684
With the help of providing the part number that is...thanks
$100? That is crazy--you could pick up an entire parts machine for that price to get what you need.
1 week later
Quoted from paintpins:There's other options as well for replacement parts it's just a matter of how much time and money you want to spend.
Well, I certainly wouldn't want to spend $100 for a $10 part. 
2 weeks later
Quoted from dasvis:Top card is a real sleeper. First glance it looks super boring, no drops, just a ring of stand up around the edges.
One thing that I don't like about Top Card is that none of the Specials can be hit with a straight shot from the flippers (unless you count an alley pass as a direct shot). It is basically throw the ball into the pops and hope to hit the Ace or the rollover.
4 months later
Quoted from ejacques:On the off chance...anyone in the Northeast have a head for a Gottlieb Jet Spin?
I have one that I could part with, although I am not sure I would consider Michigan to be "in the Northeast." Maybe it can hitch a ride with someone??
2 months later
I am looking for the stepper piece of the ball count unit (the part with the snowshoes) for a Gottlieb Pro Football. I think the stepper from a any single-player machine of that era would work. The first picture is what I am looking for, and the second is the homemade piece that I have now that needs replacing. Willing to take the whole stepper unit if you don't want to split it up.
2 months later
Quoted from Pneuma:Anyone have any extra bonus balls for the backbox of a 300 or Top Score? Just obtained a nice TS but it's missing one bonus ball...
If you don't find one at Pinfest, PM me and I will send one your way.
4 weeks later
Quoted from SkyKing2301:Need (1) Far Out / Out of Sight drop target, otherwise I'll have to replace them all (since a new one won't match)! Anyone?
If you still need this, PM me your info and I will send a couple of these your way.
1 month later
Quoted from mrbanjo:In need of 5 of the yellow top acorn nuts for a 71 Williams Klondike if someone would have them?
PM me your address and I will send these your way. (These are not new, though.)
Quoted from pinhead52:I need a wide lockdown bar to an early 60s Williams game, Merry Widow
Does this work? I think I still have it.
https://pinside.com/pinball/forum/topic/the-em-seeking-parts-thread/page/53#post-3379951
Quoted from RyanClaytor:Scott, you are the lockdown bar king!
Another:
https://pinside.com/pinball/forum/topic/triple-strike-lock-bar#post-4475983
Quoted from SirScott:I might have the one you need (used) if you don't want to pay full price from Marco.
Quoted from RyanClaytor:This one features the bar from our lockdown swap, SirScott:
Oh yeah? Does this lockdown bar look familiar? 
Quoted from Toyguy:Anyone happen to have a spare armature plate with the ratchet assembly for a mid-70s Williams match unit?
Do you have a picture of what you are looking for? I have a GP head that has most of the parts still in it. Only appears to have been in a *small* fire.
3 months later
Quoted from JONESDS:If somebody runs the bigger size for games like Jet Spin, count me in.
I have several of these ready to go. Let me know the next time you are in MI. They are a heavy gauge metal like the originals.
2 weeks later
Quoted from JethroP:Looking for the lamp separator, as shown, for mid to late 60's Gottlieb.
Quoted from pinhead52:there is an ebay seller 3d printing these, i'll dig up the contact
ebay.com link: Gottlieb Pinball Machine C 9994 Ball In Play Light Divider 3D Printed
2 months later
Quoted from mrm_4:paintpins just sent me a message this morning saying he has 3” bells.
2 months later
Quoted from goldenboy232:Answered my own question: I see that pinball rescue in Australia sells the decals on clear vinyl. I'll order two sets from them unless someone knows of a U.S. supplier.
The font on those decals is off a bit. You might be better off printing these off yourself on adhesive vinyl: http://www.pinrepair.com/gtb/profoot.pdf
And send me your extras. 
Quoted from goldenboy232:Anyone know where I could buy adhesive vinyl that would feed into a laser printer? Not sure what I'd search for specifically.
Would these do the trick? amazon.com link »
You can request a (free) sample from the manufacturer.
https://www.onlinelabels.com/General/SamplesViewItem.aspx?ID=5102&ColorID=0
1 week later
Quoted from pinhead52:I need a replacement white plastic light divider used behind the 100,000 lights on the late 70's 2 and 4 player games.
I have one from a 4-player (Jet Spin)--it is hard to tell if this is the same as yours?
Quoted from pinhead52:thats it will pm
Ken, I will get this in the mail to you tomorrow.
Quoted from AudioHaven:I’m looking for backglass balls for a 1975 Gottlieb Soccer.
Just do what I did.
5 months later
Does anyone know which bulb sleeves are in a Gottlieb Flying Carpet? Mine are all faded and broken. Are these supposed to be covering the bulbs behind
all
the standup targets? I assume that they are the yellow ones listed on Pinball Resource (GTB-24410T+ Yellow)?
http://www.pbresource.com/lampcov.html
Also, does anyone have the rubber-ring list for this machine?
Quoted from pinhead52:The Steve at PBR has the answers to your questions. Use the Steve
I'm afraid. No, really. 
2 months later
Quoted from RyanClaytor:..except with one less zero.
5 months later
Quoted from undrdog:My sleeves were dingy brown, so I thought it was age and yellowing. They cleaned up very nicely with Novus 2. Now they are bright yellow.
All the (old) ones that I have seen are also very brittle, so I just replace them.
7 months later
7 months later
Quoted from EJS:I always have a hard time with that web site. Seems like many pages are impossible to find unless you already have the links.
Try searching in Google using the "site:" parameter. For instance, search for "coils site:pbresource.com" for the coils page. Not perfect, but better than hunting/pecking on the site.
Quoted from DorkInAbox:I'm looking for a playfield and a back door for my Big Brave project. I'll be at the York show.
3 months later
Quoted from mrm_4:Wasn’t sure where to post this so I figured this thread made some kind of sense.
As part of cleaning up a friends Bow and Arrow I made him new spinner decals.I think they turned out great. I made an extra set just in case I messed up trimming them.
Those look fantastic!
8 months later
Quoted from wizardblom:Looking for right upper plastic fotmr Pat Hand.
9 out of 10 are broken.
Could use 2 of them.
You could always try fashioning your own.
https://pinside.com/pinball/forum/topic/made-my-first-plastic-learned-a-lotabout-what-not-to-do
4 months later
Buy the
Quoted from Barr993:Thanks to pinhead52 I was on the look out for common rubber parts, walked into my office today and realized the playfield cushion is the same as a rubber silencer for a metal frame door.
$12 for 100 at Amazon
Rockwood 608 DuraFlex Rubber Door Silencer for Metal Door, https://a.co/d/duM4EGD
Buy the 100 pack and then use the extras as silencers for the plungers on your chime unit(s).
Promoted items from Pinside Marketplace and Pinside Shops!
You're currently viewing posts by Pinsider sirscott.
Click here to go back to viewing the entire thread.
Reply
Wanna join the discussion? Please sign in to reply to this topic.
Hey there! Welcome to Pinside!
Donate to PinsideGreat to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
