Hey everyone i'm working on my 1963 united sabre ball bowler and ran into a snag. @mopar has been helping me out a ton with some needed parts but I am missing 5 of the round pins that hold the actual pins on and 3 others are missing the tiny hairpin clips and he doesn't have any extras. Is there any chance anyone on here has any of these they would be willing to part with? I need a total of 5 pins and 8 of the tiny hairpin clips. Thanks guys, Bill. 

20200423_144629 (resized).jpg

20200423_144655 (resized).jpg

I checked them but It seemed like those weren't small enough. I will double check though thank you.

Yeah thats definitely a good idea and if need be I will investigate going that route. My problem is that i'm totalky OCD and it will drive me crazy not being able to put it back the way it's supposed to be. However, I will do what I have to do to get it put back together and fullufunctional.

Definitely another great idea and another I will have to look at if I can't find the original stuff.

Picked up a fun new toy that I will be getting to in a few months. It's a1973 Midway Duck Hunt and 2 things I need right off the bat is a coin door as this one isn't salvageable at all. The 2nd thing I need is the little round glass piece that focuses the light that goes at the end of the gun barrel. If anyone has a lead on these or has 1 please send me a pm. Thanks.

20200424_122605 (resized).jpg

Yeah I figured that would probably be a little challenging to find but I'm not starting on this project for a few months anyway so at least this will give me time to maybe track one down. Maybe I will place a Marketplace wanted ad for the coin door and that Glass Lens piece not really sure what the technical name is for it though does anybody know?

Anyone have an extra one of these pin reset motor switches? The bottom leaf that has the riveted on piece that rides the wheel has broken off. The previous owners just bent the hell outta the switch to make it function. You can see in the pic the bottom leaf is broken off.

20200512_131127 (resized).jpg

1963 united sabre ball bowler

Don't think that will work. Heres the one behind the broken one which is the same thing i'm looking for.

20200512_131149 (resized).jpg

I'm looking for 2 coin chutes for a Midway coin door off a 1973 Duck Hunt. Heres a pic of 1 thats on here but somehow it was busted by previous owner and is taped together. I picked up a new to me coin door but it didn't have those 2 coin chutes.

20200518_142617 (resized).jpg20200518_142349 (resized).jpg20200518_142423 (resized).jpg

Anyone in here happen to have an extra 6ft section of wire harness for a united ball bowler? I'm in the process of finishing up my conversion of an end piece of lane section into a center lane addition to extend my bowler and need the wiring harness to connect the pieces. I will just build the harness if I have to just would rather have an original if possible. Current one has 10 wires but the number of wires isn't really important as long as there are at least 10 plug holes in the connector. Forgot to take pics of it but if you've got anything that you think may work please pm me. Thanks

Resized_20200912_072834 (resized).jpeg

Resized_20200912_072845 (resized).jpeg

Hello i'm in the middle of my 1973 Midway Duck Hunt project and still cannot locate a couple of parts. Hoping that someone in here has these last 3 coin door parts I need. I have 1 coin chute but it is taped together otherwise it would fall apart. Ideally someone has 2 they would part with otherwise I would be elated with just the 1 i'm missing. 2nd thing i'm missing is the bracket that holds on the slam switch as i'm actually missing the whole slam switch also. Final thing is the bracket that holds on the coin drop switch. Please send me a pm if you have any of these parts that I am in need of. Not looking for a free handout either just really need to find these parts and cross this coin door off the list. Thanks for any help, Bill.

20210215_130925 (resized).jpg

16134167321892278774513956307357 (resized).jpg

16134166706581471679968028936094 (resized).jpg

Looking for 1 or 2 for a spare but especially 1 of these nylon couplers for a Midway Duck Hunt shooter game. This is the nylon coupler that connects the motor shaft to the shaft that drives the score reels. One of broke and I cannot find any of these for sale anywhere.

20220228_141014 (resized).jpg

Screenshot_20220228-152947_Samsung Internet (resized).jpg

This is great thank you for the link.