You're currently viewing posts by Pinsider pinballbrian.
Click here to go back to viewing the entire thread.
Thank you Odin,that is exactly what I need .plate with post.did not understand .what is pm?sorry,don't understand all pin lingo yet.ha ha.
Thanks Odin,could use under play field button switches.as many as you would like to sell.email me at [email protected] you.
Ha ha,was wondering if that was trick question.did you want to sell all parts.can get new buttons from pbr.just bought some.but will take all you want to part with .thanks.again contact me at gmail.and leave phone number and we will talk.thank you a lot.
Odin,also I have PayPal account to pay you if that is option,how ever you want to go about it.figure up what you want and let me know.don't need boards .just parts attached.easier and lighter to send.again thanks.
Sounds good.thank you.did not know you ran boneyard.have friend who has one here in Missouri also.does better putting cars together now then parting out.cars are getting harder to buy here.scrap went up a lot couple years back and everyone sold there's to scrappers.but that's another story.will make list.thank you.
Phil,did you check xmission pinball parts online ,parts for sale list.I think I seen where guy has a bunch back panels.try there.don't remember how long ago he posted.but I wish you good luck.
Markg.have you thought about modifying new bumper body's and caps.or are you looking for total orig look.I know pbr has a long list of pics for caps.I would try to modify body from dead bumper body, I think they are called, and cut bottom off gottlieb skirts.I would call pbr about caps.
Markg,forgot to mention ,if body has to be certain color.that fusion paint for plastic is sweet.it won't peel.glossy look.
Markg,also I see what you mean. That seems like a frustrating part to find.same with 10 step units I'm looking for. Ha ha.if your luck has been like mine lately, we are both up s creek.ha ha.I have to laugh at myself sometimes to have patience.
Markg,to maybe get you on right path.I hope.ha ha.contact Doug at vintage pinball [email protected] ,he maybe be able to help.
Wicked,thought I seen them on eBay.also you can get stickers made at office depot.transparent or white backing.whatever.then get plexiglass and cut them using scroll saw.if I knew what size I could cut you some and send them to you.I made some for my flash Gordon,did not like origs.
I just wanted to take a few minutes to thank Odin,you are awesome!!!.you went above and beyond.. Can't thank you enough.also special thanks goes out to markG of forum you are also exceptional. Rolf martin ,could not of figured problems on machine without him and forum people,this person is very knowledgable ,also special thanks,and last but not least,skip and barb.you are all wonderful people and I'm so glad to be part of this pin community.I have met so many nice people since I got into this hobby.I can't thank you all enough.and a thanks to all the nice honest people I have met here.pinball Brian.
Electrocute.did you check eBay,pinball machine parts,I seen a few credit assms on there.check there and if no luck.let me know tomorrow. Will see what I can do.
Does anyone have some extra Jones plugs to sell .male and female.picked up a gottlieb big shot on Craigslist in indiana couple of weeks ago.you may of seen it.cab was busted.I gambled.ha ha.made the 10 hour round trip.machine turning out better than expected.will show pics.anyway need Jones plugs.all mine are in pieces.thanks.
Before and after play fields.had to buy few new parts and scrub old wax off ,but looks better.mothers carnuba wax helped a lot after cleaning.now need Jones plugs ,also does pinball resource have them.or anyone else.again thanks .
Hey hoov,12.00 each at pin resource.he he.after seeing prices for those new.I cleaned my old ones too.ha ha .play field of what I can see looks awesome.old Williams I'm guessing.I see a little red missing around pop bumper.advice.get some sharpies permanent markers.come in all gott ,Williams colors.they make them in all colors.Walmart ect.will have them.then if color is slight off.wax will blend them.works good for little spots.won't guarantee for big spots.but fixed a few of mine a lot better than what I had.after waxing in I couldn't tell it had been touched up.example.used them to touch up scuffs around pool balls .ect.looks a lot better.
Hey hoov ,I figured you were looking for orig.just most are faded or warped for parts.but when seen play field.spot it got me thinking about touch up.thought everyone would like to know touch up trick if they weren't hip to it yet.can I ask what game you have.colors look very vibrant.hard to believe spot as good as your colors look.
Hi breihl.my bad.no don't clear coat at all.just use wax.I never clear coat a play field unless I'm putting down mylar overlay.another topic.I just clean and wax orig.I could not tell diff in any plastic parts I have purchased from pbr.I'm just glad new parts are available. I would not take up this hobby if not.and let's face it .these games are average 40-50 years old.most of these kids today never seen but a few .and the play fields are what they are.I say do what you have to do to make them pretty and working.I understand orig is important to some.and I can respect that.but personally.if I could only go orig.I would not enjoy this hobby.or would I be satisfied with ugly piece of junk for my money.and if your married ,you may have Ali vs Frazier on the lawn before you can buy another.he .he.just saying.ha ha.
That just gave me idea( light bulb). Flash flash.I had some made at office depot.he has all diff materials. I used d it to make a plastic set for my flash Gordon.also p m hoov on those caps.he can add color to trim platters.thank you .it proves sometimes two heads are better than one.I'm liking that idea.have office depot color a sheet of same material.cut to fit.
I'm thinking about having some made.called off depot.same guy still works there.he said he could ,no problem.will update subject as soon as we see finished product.
!!! Attention.!!!.mypinball has a pre order on bally sqwauk and talks.if you have early bally ss.you could be in a world of hurt later.
Hey guys,you might try skip on ebay.user name is pinjunk.he told me he was parting a lot of machines.prices resonable.he goes to Allentown show also.goodluck.
Hey guys,would anyone have a few williams switch blades with the big silver contacts.pbr did not have any.or just the big silver contacts.can pm me.thanks.
Hi, mopar,can't tell you name of bowler because I stole it from you.i was running out the door and forgot to take them .I was hoping you would show up with the correct ones.please pm me and let me know when you will be at work so I can get them.there like the pic I posted in #4063.thanks.
If target has not been bent .I would sand ,tape off and repaint.have office depot make zero sricker.
Just cut an old flipper plunger bakelite or wood. Plexiglass would also work.( think old williams will work.just a thought.drill holes.
Hi Mike,yes those will work perfect. I have paypal .please pm me or email. [email protected]..again thanks.
Pinhead ,that's the wires with sockets I need.my machine does not have leads from coinchute,want pic of those wires.
Hi,does someone else have a pic of 1970s gottlieb coin chute wiring above door.i don't have time for these game players.thank you.
Ya,but had you read my forum.you can see he still has not helped.that is bally wireing.i don't know why it is so difficult to show me correctly the first time I asked.you people come on here with fake accounts with no intentions but to derail others forums and promise parts ,then leave them hanging.just butt out and I will get proper help somewhere else.
Ha ha,I can see you guys gang on people here.you never had any intention of showing me wiring above eyelets on gottlieb em.my machine is missing that wiring.again if anyone can show me wiring ,including sockets,much appreciated.
Hee,hee ,ha,ha.yes,does anyone have the wiring above eyelets in previous post they would like to sell,sockets included.or pic to copy (make one).again thanks.hee ,hee.is that clear and meet your grammar standards,proffessor.
Ya,me too.hee,hee,.merry Xmas guys,I guess I'll try again after holidays,a pic would have been nice.
Hi pinhead,sorry if i was not clear.when I bought machine ,it was missing outside coin slot.i guess they disconnected the wires at eyelets.i don't have that part of harness to coin chutes ,or coin slot outside cover. ( see pic).would be willing to purchase though.but was hoping if I had pic ,and it was just a couple wires and sockets I could make it myself.either way.
1545435828527-1602992428 (resized).jpgHi ken,do you think steve will have the wiring used.i have purchased some used parts there.relay ladders ect...will do after Xmas break.again thanks.
Hey ken,that's what I'm talking about.cool deal.as my machine would not look right with new cover.will pm you,again thanks.
Why don't you mellow out pacman.if you would read thread ,a lot of it was just joking around.me and Ken are making deal.why is it so personal to you.and as far as flake.you sure it's not you.you seem to take it awful personally.
Hi,is it possible to hone out cylinder.also,I do not know how inside looks,spring,rubber wheel cylinder cup.?.another idea.look on sides of carburators,80s 90s vehicles.i remember big choke mechs that look similar.same style arm that slides back and forth.use there housing or sliding arm.just a thought.but if you can take apart and show inside.i think everyone can help better.come on pinsiders ,I think together ,we can do this.merry christmas.
You're currently viewing posts by Pinsider pinballbrian.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/the-em-seeking-parts-thread?tu=pinballbrian and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.