Monroe Township, NJ
Still looking for an original good condition apron for a Gottlieb World Fair. I have a nice apron with the Pinball Rescue decal, but would really like to find a nice one with the original webbing.
(Topic ID: 93586)
Linked Games
"300"
Gottlieb, 1975-
2001
Gottlieb, 1971
-
8 Ball
Williams, 1966
-
Abra Ca Dabra
Gottlieb, 1975
-
Amigo
Bally, 1974
-
Aquarius
Gottlieb, 1970
-
Atlantis
Gottlieb, 1975
-
Bank-A-Ball
Gottlieb, 1965
There are more than 8 games linked to this topic.
Click here to show all linked games
Click here to show all linked games
Topic Gallery
You're currently viewing posts by Pinsider phillyfan64.
Click here to go back to viewing the entire thread.
3 weeks later
Quoted from EM-PINMAN:Still looking. Pinhead52 did not have the correct one on hand to help. Here is some pics of what I'm taking about.[quoted image][quoted image][quoted image]
I have one of them on my Eight Ball Deluxe. You can have it. PM me if you’re still looking for one.
2 months later
Quoted from Comox-Rocks:Looking for an apron to fit 1964 gottlieb world fair. Helping out a friend.[quoted image][quoted image]
Good luck. I've been looking for one for ages!
Quoted from MikeO:You could always buy one of Lee and Gordon's decals and refinish your original holder.
http://pinballrescue.net/Decals_Apron_Gottlieb.html
It is a great product.
That’s exactly what I have. It came out great. I just wish it had the webbing.
3446BC54-A13D-42EF-AE71-A398E1491780 (resized).jpegQuoted from pinhead52:i web these before applying the decal
I guess the webbing has to be very thin so the decal sits flat.
Quoted from boilerman:webbing before decal doesn't work very well. i web after then clear, looks good
Does the webbing stick to the decal or does the clear coat hold it all together?
Quoted from boilerman:it does stick to the decal but it can be removed with some minor effort, the clear locks it in and smooths it out also. i haven't done one in a while so i don't think i have a pic handy.
i do need to do one soon so maybe i will document the process
That would be great, thanks.
1 month later
2 years later
Looking for Gottlieb slotted screws without washer heads. I need the longer 1-5/8” and 1-3/4”. PBR only has the 1-1/2”.
Also need about 24 with the washer heads size 6 x 1-1/2”.
Thanks.
Quoted from pinhead52:how many do you need? I can source a 8 or 10 of each
I need 6 of them. They are for the apron. I think the 1-3/4” would be better if you have them. Thanks!
Do you have any with the washer heads? I need about 24 of those in 1-1/2” for the plastics.
Quoted from pinhead52:The only washerhead I have is the phillips Steve sells. shoot my your address
Ok thanks very much. I’ll PM you.
1 week later
Gottlieb World Fair machine. I’m looking for the metal pieces that cover the coin return slot on the bottom of the coin door. According to the parts book it’s parts # B 7193 and B 7194. The 7194 looks more important. I’m not really sure what 7193 is for. Thanks
4AD5C6CF-B589-402D-9795-84505FEC5231 (resized).jpegF19B56DD-7A12-4A91-87FB-C180A1B3FBC2 (resized).jpeg7DCA28DC-A28D-459A-9CAB-82318CB9FCA3 (resized).jpegQuoted from pinhead52:7193 is a coin ramp to direct the coins from the three chutes to the center... These pieces are always rusty and I get them replated. I can help with a 7194. I only have a rusty 7193 available.
Ok. The game is on free play anyway so I wouldn’t need 7193. I’ll pm you about 7194. Thanks.
Coin return cover B7194 wasn’t available so if anyone else has one for sale please let me know. Thanks.
3 weeks later
Quoted from psd4me:I have a Grand Slam parts machine if anybody is looking for anything. No bg, pf and cab painted over.
Sent you a PM.
3 weeks later
1 week later
Quoted from durriti:Sometime the coin return chute has a flap that hangs blanking plate brackets, it covers most of the coin return semi circle hole in the front but over the years only two gottliebs out two dozen had the flap. The part isn't listed in the gottlieb in the 1966 or '68 catalogues.
Thanks. I’m trying to find a picture of a door that has all the parts on it.
1 month later
5 months later
Quoted from pinhead52:my plater takes about 4 weeks to turn around stuff (I had him do these buttons on a game). Look up Al's plaing, Ft Worth TX
Thanks. I’ll look him up. I have a local guy that I’m going to check with this week. He’s been recommended also.
Quoted from ChipS:Let me know how it goes with your local guy (I'm assuming New Jersey). I'm in Maryland and am looking for someone in driving distance.
The local guy is actually in Philadelphia. With the I95 fire and road collapse today it will be tough to get to. The place is about a mile from the fire. I’ll call first. If I go there I’ll need to find an alternate route. I have to see if there’s anyone right near me in South Jersey.
1 month later
My Upper Deck pitch and bat buttons are also missing. Anyone have a spare set?
7C3DA761-F111-4DB7-9B8E-7F4D14521F5F (resized).jpeg
Added 9 months ago: Found a set elsewhere.
Quoted from AlexF:I don't know if it helps but it looks like the same disc used to mount the beach ball animation wheel in Big Top and Pleasure Isle.
Behind the backglass? I’m looking for pictures.
Quoted from AlexF:Yes.
[quoted image]
Ok, thanks for that. Very helpful. I talked to Steve Young. He doesn’t have it but he might be able to make it if I can’t find one.
Quoted from pinhead52:I can probably have my resource make a piece of plastic with a decal of sorts to serve the same purpose. We would need a scan on the plastic under it that gives us the hole position
Thanks very much. I was just going to ask if anyone has the game if they could take the part off and trace or scan it and PM it to me. I’ll get back to you pinhead52.
Quoted from AlexF:Yes.
[quoted image]
AlexF any chance you can take that part out of your game and scan it? The piece underneath is impossible for me to remove.
Quoted from AlexF:It's always hard to say no when asked for a pinball favor. With that said, it's fairly involved to get to with the glass in. I'd have to move another machine to pull out the game. Drop the back panel, reach down in there with a short screw driver to get it off. Hopefully without dropping them down. Not to mention I don't have access to a flatbed scanner these days.
Don’t even worry about. I posted in the main EM forum for someone that has a World Fair. I’m still holding out hope that my plater finds it. He asked me to give him until the weekend.
I think I have a trace. Bottom disc is exactly 2” in diameter. It’s 1/16” or 3/32” thick. I think the missing disc is exactly the same size. The issue is lining up the screw holes. This might work for a template.
F9D40594-424F-40B7-9BFB-4141730E5FAF (resized).jpegC54AC53C-08A9-40B8-9998-9CEF617341BC (resized).jpeg6D76ACC1-B381-4675-9525-4C9345347380 (resized).jpegC847855E-BEB1-43B2-ABCA-26C80372DA03 (resized).jpeg
7 months later
Quoted from CaffeineSlug:Looking for the ball return cam for Gottlieb Drop-A-Card (or similar games), the part number is A-10945. It looks like PBR used to have these, but when I asked a few weeks ago they were unavailable.[quoted image]
Not sure if this is it or not.
Promoted items from Pinside Marketplace and Pinside Shops!
You're currently viewing posts by Pinsider phillyfan64.
Click here to go back to viewing the entire thread.
Reply
Wanna join the discussion? Please sign in to reply to this topic.
Hey there! Welcome to Pinside!
Donate to PinsideGreat to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
