Still looking for #Teacher's Pet plastics, especially the top 2 and the inkwell halfway down the pf.
Thanks for looking!
Jim
You're currently viewing posts by Pinsider mojonitro.
Click here to go back to viewing the entire thread.
Still looking for #Teacher's Pet plastics, especially the top 2 and the inkwell halfway down the pf.
Thanks for looking!
Jim
Like many others, looking for a Jacks Open back glass. Just got the machine, and it needs an upgrade.
Jim
THANKS @Murphdom! I called Gary (the email address didn't work, for some reason), and if I can't find an original glass, I'll go his route. He sells a printed film that sandwiches between two sheets of glass.
Jim
Does anyone have the red springs for Williams steppers? I'm working on a Grand Prix and could use three of them.
Also, I need the wireform rod that bolts onto the top coil of the Bonus stepper that quickly clears the stepper rather than making it step back down to zero.
Again, for a Grand Prix.
Thanks for looking!
Jim
Yes, I'm sure. The very edge of two teeth are rounded off, and the stepper double indexes at those two spots every time. One is at the 6000 point mark, one at the 11000.
I understand about the end of travel missing teeth, but thanks for making sure.
Jim
I'm looking for the Brake plate for a Flash Motor Unit on a 1972 Fireball . It's the plate that mounts behind a coil, and when the coil releases, the bent tab on the top of the plate engages the sprocket on the Flash Unit and stops it. You can see the tab is worn away where it engages with the sprocket, so it drifts to a stop. I checked PBR, and they don't list it. If there's a repair for this, short of welding, I'm all ears!
Jim
Looking for a coin door microswitch for a Bally Fireball.
Bally Part # is E-108-92 or E-108-98. Either will work for me.
Jim
It's a long shot, I know, but I'm looking for a backglass for a Masquerade.
Buhler, Buhler, Buhler................
Jim
Like many, I imagine, I'm looking for an un-faded, un-flaking Grand Prix backglass.
10,000 made, so why is this glass unavailable?
Has it ever been reproduced?
Jim
Anyone have the Surf Champ plastic for the bottom left sling?
Jim
Thanks to all you pinsiders who pmed me. I have a plastic enroute. This community is great!
You're currently viewing posts by Pinsider mojonitro.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/the-em-seeking-parts-thread?tu=mojonitro and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.